trinityboringsolutions.com

Bullard Texas Directional Boring: Redsprings Soil, Dean Branch and US 69

Quick Answer: The City of Bullard water system uses groundwater wells, and Smith County electric providers report service, so we identify the line owner before a bore near US 69. Trinity Boring Solutions provides directional boring, also called horizontal directional drilling (HDD), for routes such as Dean Branch crossings. Bullard is 329 road miles from our Yukon, Oklahoma main office, and Houston Street is one local route to scope. Redsprings soil and clay mapped below the surface call for careful fluid control and staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Bullard bores at a glance

  • Incorporated city in Smith County and Cherokee County, Texas. Population 5,070 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 329 miles, about 6.4 hours of driving.
  • Ground: Redsprings soil is mapped on 40 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 49 percent of the area.
  • Highways inside the boundary: US 69, FM 344 and FM 2493. State permit office: TxDOT Tyler District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Dean Branch and Flat Creek.
  • Public water: City of Bullard, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Bullard and Smith County?

Trinity Boring Solutions handles directional boring in Bullard, where the City of Bullard water system uses groundwater wells and electric providers report service in Smith County, making line ownership an early check. The Census Bureau Vintage 2024 estimate puts Bullard at 5,070 people. We can install water, sewer, gas, electric conduit and fiber along routes such as Houston Street, after locating and exposing marked utilities.

Our main office is in Yukon, Oklahoma, and Bullard work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Before working near City of Bullard water lines or electric conduit in Smith County, we bring a record of more than 25 years without a utility strike. Our family business began in 1965, and we have done directional boring since 1982; Bullard is 329 road miles from the Yukon main office.

Trinity Boring Solutions Ditch Witch JT922 HDD rig and vacuum excavation truck on a commercial bore in Oklahoma City
Our Ditch Witch JT922 drill and vacuum excavation truck on a commercial bore in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Bullard and Redsprings soil?

The USDA soil survey maps Redsprings as the leading soil series in Bullard, so a route can shift from a gravelly surface layer to sticky clay below. Redsprings makes up 40 percent of mapped soil series, and a Redsprings very gravelly sandy loam map unit with 2 to 5 percent slopes covers 30 percent of the area. At about 40 inches, clay is mapped under 63 percent of the area, with an average clay content of 35 percent at that depth. Mapped Redsprings and Alto soil patterns guide our planning, but we do not treat them as test borings.

USDA soil survey, inside the Bullard city limitsWhat is mapped
Soil series mappedRedsprings 40 percent, Alto 15 percent, Wolfpen 12 percent, Nacogdoches 8 percent and Elrose 5 percent
Texture at the surfacevery gravelly sandy loam 40 percent, loamy fine sand 20 percent and fine sandy loam 20 percent
Texture about 40 inches downclay 63 percent, sandy clay loam 22 percent and clay loam 7 percent
Engineering class about 40 inches downlean clay (CL) 69 percent, clayey sand (SC) 15 percent and fat clay (CH) 8 percent
Average clay content about 40 inches down35 percent
Bedrock mapped within 60 inches49 percent of the area (0 percent hard rock, 49 percent weathered rock)
Seasonal water table within 60 inches29 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel73 percent of the area

Weathered bedrock is mapped within 60 inches across 49 percent of Bullard, with typical bedrock depth at 53 inches; hard bedrock is not mapped within that depth. A changing soil profile can slow a bore, and the soil to rock contact can push the head off line. A seasonal water table is mapped within 60 inches across 29 percent, so pits may need pumping. Flood prone soils cover 3 percent. High steel corrosion risk covers 73 percent, a concern for steel casing and tracer wire. The Eocene Weches Formation includes sand and clay, so the map signals changing ground to plan for.

What does it take to bore Bullard clay?

Bullard has clay mapped beneath much of its surface soil, so we plan fluid, reaming and pipe handling around the Redsprings ground. The exact route still needs utility exposure and a tracked bore path.

  1. Redsprings soil has gravelly sandy loam at the surface and clay mapped below, so we use staged reaming and keep pipe ready for the final pass.
  2. With clay mapped under 63 percent of Bullard at about 40 inches, sticky cuttings can build on a reamer; we manage fluid returns to limit pressure under pavement.
  3. Seasonal water tables are mapped within 60 inches across 29 percent of the town, so we plan small pits and pumping where wet ground fills an excavation.
  4. At a Dean Branch crossing, we plan the bore to pass below the channel, track the drill head from the surface and log depth and pitch.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

What is in the way of a new line in Bullard near Dean Branch?

Bullard has US 69, FM 344 and FM 2493 within its limits, so a route crossing one of these roads needs early coordination with the line owner and TxDOT. Houston Street is the longest named street at 2.26 miles, followed by Henderson Street at 1.85 miles and Lilly Lane at 1.22 miles. A bore can pass below pavement rather than cutting across it, but the road right of way and utility marks shape the route and work plan.

CrossingTypeMapped extentWho has a say
US 69US highway4.5 roadway miles insideState highway office
FM 344State highway5 roadway miles insideState highway office
FM 2493State highway3.2 roadway miles insideState highway office
Dean BranchStream0.69 channel miles insideChecked for Corps of Engineers jurisdiction
Flat CreekStream0.1 channel miles insideChecked for Corps of Engineers jurisdiction
County Line CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Rome BranchStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Stone Chimney CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Bullard or within one mile outside its limits, and no street and rail crossing is mapped in town. Dean Branch runs 0.69 channel miles within the limits, while Flat Creek runs 0.1 channel miles. Three mapped street crossings cross named streams in Bullard. A creek route needs depth planning beneath the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who approves a Bullard bore beneath US 69?

The utility owner files for a TxDOT utility permit when work uses the US 69, FM 344 or FM 2493 right of way in Bullard; the driller does not file that application. The TxDOT Tyler District reviews it through the online RULIS system, and we prepare the bore plan and profile for the owner to submit. TxDOT cover rules set minimum depths below the crossed grade, including 60 inches for electric and communication lines and water lines, and 60 inches for pressurized sewer crossings. For US 69 work, we check the TxDOT Tyler District permit, which can set a different bore depth.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near the City of Bullard system?

The City of Bullard public water system uses groundwater wells and serves 4,500 people through 2,104 service connections, so a nearby water route needs careful line checks. Electric providers reporting service in Smith County include Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Upshur Rural Electric Cooperative and Wood County Electric Cooperative. Those reports do not identify the provider at every Bullard address, so we confirm the line owner before a conduit bore near Main Street.

Line ownerWhat it isSourceSize
City of BullardPublic water systemGroundwater wells2,104 connections, 4,500 people served
Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Upshur Rural Electric Cooperative and Wood County Electric CooperativeElectric utilities reporting service in Smith County and Cherokee CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Bullard’s median housing year is 2008 in the 2019 to 2023 estimates, which we consider when planning underground routes. The estimates place 8 percent of housing before 1960 and 67 percent in 2000 or later, but house age does not establish the age or location of a buried line. A replacement route near Henderson Street still needs marked utilities exposed by hydrovac before drilling close; paint shows position, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

What is near Bullard and Tyler?

Bullard covers 4.19 square miles across Smith County and Cherokee County, with 80 percent of the town in Smith County and 20 percent in Cherokee County. Its elevation is 497 feet, and ZIP code 75757 serves the area. Shadybrook is 6.7 miles west, Emerald Bay is 7.2 miles west, and Whitehouse is 7.8 miles northeast. Tyler, the nearest larger city and Smith County seat, is 12.0 miles north. Our Yukon yard is 329 road miles away, a 6.4 hour drive, which affects mobilization for Bullard work.

Places near Bullard

What kinds of bores come up on Bullard’s Houston Street?

  • Highway crossing: A bore under US 69 needs a route that fits the right of way and TxDOT cover rules without cutting the existing pavement.
  • Water service: A connection near the City of Bullard system starts with locating existing water lines before the new service route is drilled.
  • Fiber conduit: A Houston Street fiber route can pass below the pavement, with hydrovac exposure of marked utilities before the drill approaches them.
  • Creek crossing: A Dean Branch bore needs depth planning below the channel and a jurisdiction check during planning.
  • Street replacement: A Lilly Lane replacement line can be bored beneath the street, avoiding an open cut through the roadway.
  • Electric conduit: Near Henderson Street, we confirm the electric line owner before planning the conduit route and exposing marked utilities.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Bullard bore near Main Street?

A map pin matters near Main Street because the route may meet other utilities or connect toward US 69. For a Bullard quote, send the address or pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us see the path, entry and exit pits, and any creek or pavement crossings.

The Yukon to Bullard drive is 329 road miles, so mobilization is part of the job scope. Redsprings soil and clay affect drilling fluid and reaming; a crossing at US 69 or Dean Branch adds route and planning demands. Pipe size and bore length matter, as do marked utilities to expose, pavement, creek crossings, pits, excavator time and sand backfill. High profile or emergency work can also change the plan.

Questions people ask about boring in Bullard

Does Trinity take directional boring jobs in Bullard and Smith County?

Yes. We take directional boring work in Bullard and across Texas, with our own crews and vetted partner drilling contractors available for the work. You deal with Trinity from the first call through the bore log, whether the route follows Houston Street or crosses toward FM 344.

Can a new line go under Dean Branch in Bullard?

A bore can be planned beneath Dean Branch, which runs 0.69 channel miles inside Bullard. The route needs depth planning below the channel and a check for U.S. Army Corps of Engineers jurisdiction during planning. The exact path and ground conditions determine the bore plan.

Who runs Bullard’s water system and where does its water come from?

The City of Bullard owns the public water system, which uses groundwater wells. Public records count 2,104 service connections and 4,500 people served in Bullard, figures we keep in view when planning underground work. Before a new service or crossing near Main Street, we locate and expose marked lines so the bore route accounts for existing water infrastructure.

Who owns electric lines in Bullard and Smith County, and who confirms conduit specs?

Electric providers reporting service in Smith County include Oncor Electric Delivery Company, Southwestern Electric Power and three electric cooperatives. Those reports do not establish the provider at each Bullard address. The line owner must be confirmed before a conduit bore, and that owner can verify the conduit requirements for a route near US 69.

Does Bullard control Lilly Lane, and can we avoid cutting the street?

As Bullard is an incorporated town, we treat Main Street as a city street when planning a bore. A directional bore under Lilly Lane can avoid cutting through the pavement, subject to the route and utility locations. We expose marked utilities along the bore path before drilling near them.

What do Bullard’s housing ages along Henderson Street mean for replacement bores?

Bullard’s median housing year is 2008, and the American Community Survey estimates 8 percent of homes were built before 1960. That does not date buried lines along Henderson Street. For a replacement bore, we locate and expose marked utilities first, then plan around what is actually in the route.

Will Trinity serve Shadybrook and rural sites outside Bullard?

Yes. We take work beyond Bullard city limits, including routes toward nearby Shadybrook, 6.7 miles west, and rural sites in the area. The access, footage and route still shape mobilization and the bore plan, whether the work is near FM 2493 or outside town.

How much notice does Texas811 need for a Bullard bore near Houston Street?

Texas law requires a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. Texas811 describes this as at least two working days. If work near Houston Street slips more than 14 days past the original notice, submit a new request and refresh worn or moved marks through Texas811 before continuing.

What affects the cost of a directional bore in Bullard near US 69?

The job details set the price, including length, pipe or conduit size, ground, crossings and access. Redsprings soil and clay can affect drilling time; a US 69 route can involve pavement and TxDOT coordination. Dean Branch crossings, utilities to expose, pits, excavator time, sand backfill and mobilization from Yukon also matter.

Where the Bullard facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Bullard

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Bullard, Texas

Type the address of your job in Bullard. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Bullard

County: Cherokee County directional boring. Same county: Jacksonville · Rusk · Alto · New Summerfield · Wells · Gallatin · Reklaw · Cuney · Lindale · Hideaway · Troup · Arp. All counties: Texas county list.