trinityboringsolutions.com

Poynor Texas Directional Boring: Cuthbert Soil, US 175 And Mill Branch

Quick Answer: Can you get a line under US 175 without cutting it? Yes, we do directional boring, also called horizontal directional drilling (HDD), in Poynor, Texas, to pass beneath US 175 without opening its pavement. From our Yukon, Oklahoma main office, Poynor is 310 road miles away, and Elm Street is one local route a job may follow. The USDA soil survey maps Cuthbert fine sandy loam across 32 percent of town, with clay loam common at about 40 inches, so the bore plan has to account for sticky ground around the reamer.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Poynor bores at a glance

  • Incorporated city in Henderson County, Texas. Population 290 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 310 miles, about 6.1 hours of driving.
  • Ground: Cuthbert soil is mapped on 33 percent of the area, with clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 4 percent of the area.
  • Highways inside the boundary: US 175, FM 315 and FM 1305. State permit office: TxDOT Tyler District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Mill Branch.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Elm Street in Poynor?

Can we bore beneath Mill Branch in Poynor without cutting the creek? For a route near Elm Street or US 175, we plan a directional bore to leave the surface crossing intact. We take work in Poynor, an incorporated town in Henderson County with a population of 290, according to the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber along local streets and highway routes.

Our main office is in Yukon, Oklahoma, and Poynor work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, and directional boring has been part of our work since 1982. That experience covers lines from 3/4 inch service size to 48 inch casing, for jobs from a service near Cemetery Road to a larger crossing at US 175.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What does the Cuthbert soil show about Poynor ground?

The USDA soil survey maps Cuthbert soil across 33 percent of Poynor, Wolfpen across 22 percent and Nahatche across 14 percent. Cuthbert fine sandy loam on slopes is the leading map unit, while Wolfpen loamy fine sand also covers a substantial share. At about 40 inches below the surface, clay loam is mapped across 50 percent and sandy clay loam across 37 percent; average clay content at that depth is 28 percent. Cuthbert and Wolfpen soil patterns in Poynor are mapped indications, not test borings, so we verify conditions before boring. Clay can cling to a reamer, while the sandy surface layers may need support to keep the hole open.

USDA soil survey, inside the Poynor city limitsWhat is mapped
Soil series mappedCuthbert 33 percent, Wolfpen 22 percent, Nahatche 14 percent, Larue 7 percent and Bernaldo 6 percent
Texture at the surfacefine sandy loam 45 percent, loamy fine sand 33 percent and loam 14 percent
Texture about 40 inches downclay loam 50 percent, sandy clay loam 37 percent and clay 7 percent
Engineering class about 40 inches downlean clay (CL) 51 percent, clayey sand (SC) 35 percent and fat clay (CH) 7 percent
Average clay content about 40 inches down28 percent
Bedrock mapped within 60 inches4 percent of the area (0 percent hard rock, 4 percent weathered rock)
Seasonal water table within 60 inches46 percent of the area
Flood prone soils18 percent of the area
High corrosion risk for uncoated steel23 percent of the area

Bedrock is mapped within 60 inches in 4 percent of Poynor, with a typical mapped depth of 33 inches. The Queen City Sand geologic unit, of Lutetian age, includes sandstone, siltstone and claystone, so a bore may meet slower, weathered rock rather than uniform soil. Seasonal water tables are mapped within 60 inches across 46 percent of the area, and flood prone soils cover 18 percent; pits near Mill Branch need a plan for water and channel depth. In Poynor, high steel corrosion risk is mapped across 23 percent, so we consider casing and tracer wire materials in bore planning.

What does it take to bore clay loam in Poynor?

Poynor’s mapped clay loam and sandy surface soils call for a bore plan that changes with the ground. We track the drill head from the surface and log its depth and pitch as it advances near streets such as Elm Street.

  1. Cuthbert soil has clay loam mapped at about 40 inches, so we use staged reaming and manage the drilling fluid to limit sticky buildup around the reamer.
  2. Wolfpen loamy fine sand is mapped across 22 percent of Poynor; we support the bore wall and have the pipe ready before the final ream.
  3. With seasonal water tables mapped across 46 percent of the area, pits near Mill Branch may need pumping and room for water management.
  4. At marked utilities along Elm Street or US 175, we hydrovac pothole each line on the bore path before the drill approaches; locator paint does not show depth.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

What is in the way of a new line in Poynor near US 175?

US 175 runs through Poynor, along with FM 315 and FM 1305. A bore beneath an existing highway keeps its pavement uncut, and the required depth depends on the line type and the crossed grade. The town’s longest named street is Elm Street, followed by Cemetery Road and Shadey Lane. Those streets may carry a service route between properties without an open cut across the traveled surface. The bore path, pits and access still have to fit the specific street and property.

CrossingTypeMapped extentWho has a say
US 175US highway2.4 roadway miles insideState highway office
FM 315State highway1.7 roadway miles insideState highway office
FM 1305State highway1 roadway miles insideState highway office
Mill BranchStream1.31 channel miles insideChecked for Corps of Engineers jurisdiction
Caddo CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Poynor or within one mile outside its limits, so a local rail crossing is not part of the mapped route picture. Mill Branch runs 1.31 channel miles through town, and one mapped street crossing of a named stream makes creek alignment relevant. Caddo Creek is 0.1 mile from the town limits. A Mill Branch crossing needs depth and bank planning, and creek jurisdiction is checked during planning. For Poynor bores, no lakes or ponds are mapped within one mile, but Mill Branch is a stream to consider.

Do I need a permit to bore in Poynor, Henderson County?

For a bore in US 175, FM 315 or FM 1305 right of way, the TxDOT utility permit sets the route and required cover. Electric and communication lines need 60 inches below the lowest crossed grade at a highway crossing; water lines need 60 inches, and pressurized sewer lines need 60 inches. The utility owner, not the drilling contractor, applies through TxDOT’s online RULIS system, with review by the Tyler District. We prepare the bore plan and profile for the owner’s application and work under its permit. Because Poynor is an incorporated town, we account for city street coordination on Main Street and Church Street. A crossing at Mill Branch is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are already in the ground in Poynor, Henderson County?

The water provider for a specific Poynor address has to be confirmed with the city, the county or the local water district before a bore is planned. Electric service reporting for Henderson County names Oncor Electric Delivery Company and Trinity Valley Electric Cooperative, but the line owner at the work address must be confirmed before conduit plans are set. Near Mill Branch, we can use hydrovac potholing to expose marked water and electric lines before drilling close to them.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company and Trinity Valley Electric CooperativeElectric utilities reporting service in Henderson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We use Poynor’s American Community Survey 2019 to 2023 estimate of 1991 as housing age context when planning underground work. For underground planning in Poynor, we keep the housing age mix in view: 29 percent before 1960, 30 percent from 1960 to 1999 and 41 percent in 2000 or later. Housing age does not establish the age of a buried line. For a replacement bore near Cemetery Road, we expose each marked utility on the path first; paint shows position, not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Where is Poynor in relation to Berryville and Athens?

Poynor is in Henderson County, at an elevation of 465 feet, and covers 2.36 square miles. For underground work references, we keep Poynor’s ZIP codes together: 75770, 75763 and 75782. Frankston is 5.4 miles east, Berryville is 7.2 miles east, and Coffee City is 7.8 miles northeast. Athens, the county seat and nearest larger city, is 16.3 miles northwest. Our Yukon, Oklahoma main office is 310 road miles away, a 6.1 hour drive. That distance is part of planning mobilization for work around US 175 or Mill Branch.

Places near Poynor

What would we bore near Shadey Lane in Poynor?

  • Highway crossing: A line beneath US 175 is bored below the pavement, with the utility type and crossed grade shaping the required cover.
  • Street service: A water or sewer service along Cemetery Road can be routed beneath the street surface rather than cut across it.
  • Fiber route: A conduit run near Elm Street can pass below the road while we expose marked utilities along the planned path.
  • Creek crossing: A route at Mill Branch needs channel depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
  • Electric conduit: Before a conduit bore near Shadey Lane, we confirm the line owner and expose marked utilities on the proposed path.
  • Acreage service: A longer service near Pickle Plantation Airport can be planned for the property route, with footage and access included in the scope.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Mill Branch bore quote in Poynor?

For a Mill Branch or US 175 bore, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. The route matters because a creek approach or highway crossing can change the needed bore plan, even when the line size is the same.

In Poynor, soil and rock conditions matter first because Cuthbert clay loam can hold onto a reamer, while sandy layers can cave behind the bit. The number of marked utilities to expose and the crossing type at US 175 also shape the work. Creek access and pits near Mill Branch can affect equipment time and backfill. Pavement, line size and bore length add to the scope, and the 310 road miles from Yukon affect mobilization.

Questions people ask about boring in Poynor

Does Trinity take directional boring jobs in Poynor and Henderson County?

Yes. We take directional boring work in Poynor and across Texas, with crews of our own and vetted partner drilling contractors working from satellite yards. You deal with Trinity from the first call through the bore log, whether the route is near Elm Street or US 175.

Who approves a bore beneath US 175 in Poynor?

The utility owner applies for work in US 175 right of way through TxDOT’s online RULIS system. The TxDOT Tyler District reviews the application. We provide the bore plan and profile for the owner’s filing, and the issued permit determines the approved work and cover for the crossing.

Can you bore a line beneath Mill Branch in Poynor?

A bore can be planned beneath Mill Branch, which has 1.31 channel miles within Poynor. The route needs suitable depth and creek bank planning, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction. Site conditions and the line route determine the final approach.

Which electric company owns lines at my Poynor, Henderson County address?

Henderson County electric service reports name Oncor Electric Delivery Company and Trinity Valley Electric Cooperative. Those reports do not identify the provider at every Poynor address, so the line owner must be confirmed for your location before conduit specifications are set.

Who is responsible for Shadey Lane in Poynor, and does it need to be cut?

Because Poynor is an incorporated town, we account for city street coordination on Main Street and Church Street. A directional bore can route beneath Shadey Lane without cutting the street surface. The exact path and work area still depend on the property, marked utilities and the street crossing plan.

Do older buried lines near Cemetery Road in Poynor need replacement bores?

The American Community Survey 2019 to 2023 estimates Poynor’s median housing year as 1991, but house age does not prove the age or condition of a buried line. For a replacement route near Cemetery Road, we expose marked utilities before drilling near them and plan around what is found.

Does Poynor’s distance from Athens affect a bore mobilization from Yukon?

Poynor is 310 road miles from our Yukon, Oklahoma main office, so we plan travel around that distance and the 6.1 hour drive. Athens is 16.3 miles northwest of Poynor, but the longer trip from Yukon can affect mobilization planning for a bore near US 175 or Mill Branch.

How much notice does Texas811 need for a bore near Elm Street in Poynor?

For work near Elm Street, request locates through Texas811 at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811.

What affects our directional bore cost under US 175 in Poynor, including the TxDOT Tyler District permit process?

The route length, line size and ground conditions all matter. Cuthbert clay loam can affect reaming, while marked utilities, pavement and the required US 175 crossing add planning and exposure work. Creek access near Mill Branch, pits, backfill and mobilization from Yukon also shape the job scope.

Where the Poynor facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Poynor

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Poynor, Texas

Type the address of your job in Poynor. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Poynor

Same county: Gun Barrel City · Chandler · Tool · Malakoff · Mabank · Seven Points · Brownsboro · Eustace · Log Cabin · Trinidad · Payne Springs · Star Harbor. All counties: Texas county list.