trinityboringsolutions.com

Coffee City Texas Directional Boring: Pickton Loamy Fine Sand, FM 315 and Ledbetter Creek

Quick Answer: Coffee City is an incorporated town in Henderson County, so its city streets belong to the town; a bore along FM 315 can pass beneath pavement without an open cut. We take directional boring, also called horizontal directional drilling (HDD), work in Texas for crossings of FM 315 and other Coffee City routes. Coffee City is 328 road miles from our Yukon, Oklahoma main office, with Pleasant Ridge Road among the streets that may shape access. USDA maps Pickton loamy fine sand here, which can cave behind the bit and calls for staged reaming and a stable fluid wall.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Coffee City bores at a glance

  • Incorporated city in Henderson County, Texas. Population 244 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 328 miles, about 6.4 hours of driving.
  • Ground: Pickton soil is mapped on 13 percent of the area, with loamy fine sand about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 315, Texas State Highway 155 and FM 3506. State permit office: TxDOT Tyler District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Ledbetter Creek, Highsaw Creek and Caney Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near FM 315 in Coffee City?

Coffee City is a small incorporated town in Henderson County, with 244 residents in the Census Bureau Vintage 2024 estimate. We install water and sewer lines, gas lines, electric conduit and fiber along routes such as Pleasant Ridge Road and Stevenson Road, where a bore can pass beneath pavement and driveways rather than open them.

Our main office is in Yukon, Oklahoma, and Coffee City work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our range runs from 3/4 inch service lines, a fit for a Coffee Landing Road connection, to 48 inch casing for a larger crossing. We are a family business started in 1965, with directional boring since 1982, including work planned around Coffee City’s roads and creeks.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What is Pickton soil like to bore in Coffee City?

The USDA soil survey maps Pickton soil across 13 percent of Coffee City, with Pickton loamy fine sand map units on 8 percent and 5 percent of the area on different slopes. At the surface, loamy fine sand is mapped across 16 percent. About 40 inches below the surface, loamy fine sand is mapped across 13 percent and sandy clay loam across 8 percent. The survey maps sandy ground at that depth across 13 percent, with average clay content of 17 percent. These are mapped patterns, not test borings, so the route still needs field checks.

USDA soil survey, inside the Coffee City city limitsWhat is mapped
Soil series mappedPickton 13 percent, Bernaldo 4 percent, Nahatche 4 percent and Cuthbert 3 percent
Texture at the surfaceloamy fine sand 16 percent, fine sandy loam 8 percent and loam 4 percent
Texture about 40 inches downloamy fine sand 13 percent, sandy clay loam 8 percent and clay loam 7 percent
Engineering class about 40 inches downsilty sand (SM) 8 percent, clayey sand (SC) 8 percent and lean clay (CL) 7 percent
Average clay content about 40 inches down17 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches14 percent of the area
Flood prone soils4 percent of the area
High corrosion risk for uncoated steel4 percent of the area

Bedrock is not mapped in the top five feet along Coffee City’s mapped soils, which does not rule out rock deeper down. A seasonal water table within 60 inches is mapped across 14 percent, so pits on those routes may need pumping. Flood prone soils cover 4 percent, including ground where Ledbetter Creek needs careful depth planning. High steel corrosion risk is mapped across 4 percent, a reason for the line owner to consider casing and tracer wire materials. The geology map labels its mapped unit Water and gives no age.

How do crews handle Coffee City’s loamy fine sand?

Coffee City’s mapped loamy fine sand can loosen around a bore, so we plan to keep the hole supported and the pipe ready. The route near Ledbetter Creek or FM 315 can change the pit and tracking plan.

  1. On Coffee City’s Pickton loamy fine sand routes, we use drilling fluid to support the hole, ream in stages and have the pipe ready before the final pass.
  2. Where the seasonal water table is mapped within 60 inches, we plan smaller pits and pumping so water near Coffee City streets does not stall the work.
  3. At Ledbetter Creek, we plan the bore depth beneath the channel and check during planning whether the crossing falls under Corps jurisdiction.
  4. Along Pleasant Ride Road, housing built mostly between 1960 and 1999 can mean older services beside newer lines; we hydrovac expose each marked utility before drilling near it.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

Which roads, tracks or creeks can a Coffee City bore cross near FM 315?

FM 315, Texas State Highway 155 and FM 3506 run through Coffee City, so a crossing in their rights of way needs a state permit and a bore plan matched to the pavement. Pleasant Ridge Road is the longest named street in town, followed by Pleasant Ride Road and Stevenson Road. Those streets can call for a bore that avoids cutting pavement or driveways. There are no mapped highways just outside the town limits in the nearby search area.

CrossingTypeMapped extentWho has a say
FM 315State highway2.8 roadway miles insideState highway office
Texas State Highway 155State highway2.7 roadway miles insideState highway office
FM 3506State highway2.2 roadway miles insideState highway office
Ledbetter CreekStream0.56 channel miles insideChecked for Corps of Engineers jurisdiction
Highsaw CreekStream0.27 channel miles insideChecked for Corps of Engineers jurisdiction
Caney CreekStream0.17 channel miles insideChecked for Corps of Engineers jurisdiction
Neches RiverStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Black BranchStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Day StreamStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Dunn CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Lake PalestineLake or pond15,279 acres, insideChecked for Corps of Engineers jurisdiction
Hurts LakeLake or pond13 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Coffee City or within one mile outside it, and no street and rail crossing is mapped. Ledbetter Creek runs 0.56 channel miles in town, with Highsaw Creek and Caney Creek also mapped; two street crossings of named streams are mapped. Lake Palestine lies within town limits. A bore near a creek or the lake needs a planning check for U.S. Army Corps of Engineers jurisdiction.

Do I need a permit to bore in Henderson County near Coffee City?

Coffee City’s incorporated streets belong to the town, while work in the right of way of FM 315, Texas State Highway 155 or FM 3506 needs a TxDOT utility permit. The line owner, not our drilling crew, files through TxDOT’s online RULIS system; we prepare the bore plan and profile for that filing. The TxDOT Tyler District reviews the permit. At a state highway crossing, electric and communication lines need 60 inches of cover below the lowest crossed grade, and water lines need 60 inches; the permit may set another depth. Ledbetter Creek crossings are checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Henderson County near Coffee City?

The water provider for a specific Coffee City address has to be confirmed with the city, the county or the local water district before a bore is planned. For electric service in Henderson County, Oncor Electric Delivery Company and Trinity Valley Electric Cooperative report service; that does not identify the line owner at every address. We confirm the owner before planning electric conduit along a route such as Pleasant Ridge Road, so conduit specifications come from the utility responsible for that line.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company and Trinity Valley Electric CooperativeElectric utilities reporting service in Henderson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Coffee City’s median housing year at 1988; 70 percent of units date from 1960 to 1999 and 30 percent from 2000 or later. That mix can mean either replacement lines or newer service runs near Pleasant Ride Road. Before drilling near any marked utility, we hydrovac pothole the bore path. Homes and buried lines can share a street corridor, and paint shows a line’s position, not its depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

What is near Coffee City, including Bullard?

Coffee City is in Henderson County, at an elevation of 360 feet, and covers 1.93 square miles. Its ZIP codes are 75763 and 75770. Berryville is 2.7 miles south, Shadybrook is 2.7 miles east, Emerald Bay is 3.0 miles northeast, Sunrise Shores is 4.1 miles northwest and Frankston is 5.2 miles south. Bullard, the nearest larger city, is 9.1 miles east; Athens, the county seat, is 21.6 miles west. The Yukon yard is 328 road miles away, a 6.4 hour drive, which affects mobilization for Coffee City projects.

Places near Coffee City

What kinds of bores come up near Pleasant Ridge Road in Coffee City?

  • Highway crossing: A bore beneath FM 315 keeps the line below the travel lanes and avoids cutting the existing pavement.
  • Water service: A new service near Pleasant Ridge Road needs its route and size checked against marked lines before the bore starts.
  • Fiber drop: Fiber conduit along Stevenson Road can pass beneath a driveway instead of opening a trench through it.
  • Creek crossing: A line beneath Ledbetter Creek needs a planned depth below the channel and a jurisdiction check.
  • Replacement line: A sewer or water replacement near Pleasant Ride Road can use a bore to avoid opening the full street corridor.
  • Lake area service: A route near Lake Palestine needs access and crossing details checked before pits are placed.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Coffee City bore near Ledbetter Creek?

For a Coffee City quote, send the address or map pin, what will go underground, the pipe or conduit size and the footage; a sketch or plans help. A route near Ledbetter Creek or FM 315 can make access and crossing details important, so mark the proposed path clearly. Pleasant Ridge Road or another nearby street helps us identify the route to review.

Coffee City is 328 road miles from Yukon, so mobilization is part of the job scope. Pickton loamy fine sand can affect hole support, and the size and length of a bore change the equipment and reaming plan. Crossings of FM 315, concrete or pavement, marked utilities and Ledbetter Creek add different planning and field work. Pit size, excavator time, sand backfill, high profile work and emergency timing also affect the quote.

Questions people ask about boring in Coffee City

Does Trinity take directional boring jobs in Henderson County’s Coffee City, and who staffs them?

Yes. We take directional boring work in Coffee City, and the job is handled by our own crews or a partner contractor from a satellite yard we have vetted. You work with Trinity from the first call through the bore log, whether the route is near FM 315 or a local street.

Who owns electric lines in Coffee City, Henderson County, and who confirms conduit specs?

Oncor Electric Delivery Company and Trinity Valley Electric Cooperative report electric service in Henderson County, but that does not establish which utility owns a line at a Coffee City address. We confirm the owner before planning conduit near Stevenson Road, then use that owner’s specifications for the bore.

Does the city or county control a bore on Coffee City’s Stevenson Road, and must we cut it?

Coffee City is incorporated, so its city streets belong to the town, not the county. A bore on Stevenson Road can pass beneath pavement or a driveway without an open cut. If the route instead enters a state highway right of way, TxDOT permit rules apply.

Could older lines near Coffee City’s Pleasant Ride Road need replacement bores?

They could. The American Community Survey 2019 to 2023 estimates put the median housing year at 1988, with 70 percent of units built from 1960 to 1999. A replacement bore near Pleasant Ride Road can avoid opening the entire street, but marked utilities still need exposure before drilling.

Will groundwater or flood prone ground affect bore pits by Coffee City’s Ledbetter Creek?

It can affect the pit plan. The USDA soil survey maps a seasonal water table within 60 inches across 14 percent of Coffee City and flood prone soils across 4 percent. Near Ledbetter Creek, we plan for water in pits and set the bore depth below the channel.

What ground should I expect for a Coffee City bore through Pickton soil?

Pickton is mapped across 13 percent of Coffee City, and loamy fine sand is mapped across 13 percent at about 40 inches below the surface. Sandy ground can loosen behind the drill, so staged reaming and drilling fluid help support the hole. The survey is a map, not a site test.

How far is Coffee City from Yukon, and does Bullard affect mobilization?

Coffee City is 328 road miles from our Yukon, Oklahoma main office, a 6.4 hour drive. Bullard is 9.1 miles east of Coffee City, but the long drive from Yukon is the relevant mobilization factor. Route access near Bullard or FM 315 still affects the job plan.

How early should I call Texas811 for a Coffee City bore near Pleasant Ridge Road?

For a bore near Pleasant Ridge Road, make the Texas811 request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start moves more than 14 days past the original notice, request a new ticket. Worn or moved marks need refreshing before work resumes.

What affects the cost of a directional bore near FM 315 in Coffee City?

The scope drives the quote. Length, pipe size, Pickton soil, pavement, exposed utilities and the number of crossings all matter. A route beneath FM 315 or Ledbetter Creek adds crossing planning, while the 328 road miles from Yukon affect mobilization. Pits, excavator time, backfill and emergency scheduling can also change the work.

Where the Coffee City facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Coffee City

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Coffee City, Texas

Type the address of your job in Coffee City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Coffee City

Same county: Athens · Gun Barrel City · Chandler · Tool · Malakoff · Mabank · Seven Points · Brownsboro · Eustace · Log Cabin · Trinidad · Payne Springs. All counties: Texas county list.