Garwood Texas Directional Boring: Dacosta Soil, FM 1693 And West Mustang Creek
Quick Answer: Need a line beneath FM 1693 without opening the pavement? Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Garwood for routes such as FM 1693. From our Yukon, Oklahoma main office, Garwood is 468 road miles away, so a route near Gold Road helps us scope mobilization. USDA maps Dacosta sandy clay loam across 29 percent of the community. Sticky clay can grip the pipe, so we plan the reaming and pull timing around that ground.
Garwood bores at a glance
- Unincorporated community in Colorado County, Texas. Population 510 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 468 miles, about 9.2 hours of driving.
- Ground: Dacosta soil is mapped on 29 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 1693, FM 333 and FM 950. State permit office: TxDOT Yoakum District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: West Mustang Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near West Mustang Creek in Garwood?
Need a way to put a line beneath FM 333 or another Garwood road without cutting the surface? We take directional boring work in this unincorporated community in Colorado County, where the 2020 Census counted 510 people. We install water, sewer, gas, electric conduit and fiber along routes such as Gold Road, with the bore path planned for the site.
Our main office is in Yukon, Oklahoma, and Garwood work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have bored since 1982, building on a family business started in 1965. That experience matters on Garwood routes where Dacosta sandy clay loam and heavier clay call for careful reaming and fluid control.

What is Garwood ground like to bore through Dacosta soil?
The USDA soil survey maps Dacosta sandy clay loam across 29 percent of Garwood and Laewest clay across 20 percent. Fine sandy loam covers 35 percent of the mapped area, while clay covers 22 percent at the surface. About 40 inches down, clay is mapped across 77 percent, with an average clay content of 41 percent. Dacosta, Laewest, Tidehaven, and Nada soil patterns guide our planning, but they are not test borings. For a bore near FM 1693, the address and route still matter because ground can change along the alignment.
| USDA soil survey, inside the Garwood mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Dacosta 29 percent, Laewest 20 percent, Tidehaven 13 percent, Nada 11 percent and Telf 8 percent |
| Texture at the surface | fine sandy loam 35 percent, sandy clay loam 29 percent and clay 22 percent |
| Texture about 40 inches down | clay 77 percent, sandy clay loam 15 percent and silt loam 3 percent |
| Engineering class about 40 inches down | fat clay (CH) 78 percent, clayey sand (SC) 14 percent and lean clay (CL) 7 percent |
| Average clay content about 40 inches down | 41 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 6 percent of the area |
| Flood prone soils | 1 percent of the area |
| High corrosion risk for uncoated steel | 57 percent of the area |
Along FM 1693, bedrock is not mapped in Garwood’s top five feet, though deeper rock remains possible. The USDA soil survey maps a seasonal water table within 60 inches across 6 percent of the area and flood prone soils across 1 percent. Across Garwood, high steel corrosion risk is mapped over 57 percent, so we discuss casing and tracer wire materials for FM 950 crossings. The geologic map shows Delta Sand and Silt of Late Pleistocene age, including sand, silt, clay and gravel; West Mustang Creek routes need depth planning for the channel.
How do we bore Garwood clay without losing control of the line?
Garwood’s clay can stay in the hole but stick to the reamer and pipe. Around Dacosta soil, we adjust the fluid and reaming sequence to suit the ground, then track the bore as it advances.
- In Garwood’s clay mapped about 40 inches down, we use a thinner drilling fluid with polymer and open the hole in stages to limit sticky buildup on the reamer.
- Where a Garwood bore crosses FM 1693 pavement, we watch fluid returns and keep pressure controlled so the ground does not lift above the bore.
- Before a bore nears marked lines along Gold Road, we hydrovac pothole each marked utility; paint shows its route, not its depth.
- At West Mustang Creek, we plan the bore below the channel, track the drill head from the surface and log its depth and pitch as it advances.

What does a bore have to cross on Gold Road in Garwood?
FM 1693, FM 333 and FM 950 run inside Garwood’s mapped community boundary. The longest named streets include Gold Road at 1.98 miles, Mansfield Road at 1.75 miles and County Road 113 Road at 1.6 miles. Lions Park Drive also runs through the community. A bore under one of these roads can keep the pavement intact, but its alignment and access pits need to fit the specific street and the line being installed.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 1693 | State highway | 5.9 roadway miles inside | State highway office |
| FM 333 | State highway | 1.6 roadway miles inside | State highway office |
| FM 950 | State highway | 0.4 roadway miles inside | State highway office |
| West Mustang Creek | Stream | 1.72 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Colorado River | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Marys Branch | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Garwood or within 1 mile outside the community boundary, so a track crossing is not part of the mapped local route. West Mustang Creek runs for 1.72 channel miles inside the community, and three mapped street crossings intersect named streams. The Colorado River touches or follows the boundary, while Marys Branch is 0.2 miles away. West Mustang Creek is mapped within Garwood, while no lakes or ponds are mapped within one mile. Creek work needs channel depth planning and a check for federal jurisdiction.
Do I need a permit for a Garwood bore in Colorado County?
Garwood is an unincorporated census designated place, so it has no city government; road authority depends on whether a route uses a county road or a state highway. For work in FM 1693, FM 333 or FM 950 right of way, TxDOT’s Yoakum District reviews the utility permit. The utility owner files through TxDOT’s RULIS system, while we prepare the bore plan and profile and work under that permit. TxDOT rules set cover by line type, and the district can require another depth. A West Mustang Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Garwood, Colorado County?
The water provider for a specific Garwood address needs confirmation with the county or local water district before a bore is planned. EPA drinking water records do not tie systems to towns, so they do not identify the provider for an address near Gold Road. Utilities reporting electric service in Colorado County include AEP Texas Central, CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative, San Bernard Electric Cooperative and Wharton County Electric Cooperative. Before planning an electric conduit bore along Gold Road, we confirm the line owner for the Garwood route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative, San Bernard Electric Cooperative and Wharton County Electric Cooperative | Electric utilities reporting service in Colorado County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Garwood’s median housing year at 1991; 19 percent of units were built before 1960 and 43 percent in 2000 or later. A replacement line near Mansfield Road may meet older buried service, while newer construction may need a new service route. Before drilling near a marked water or electric line, we use hydrovac potholing to expose it because surface marks show position, not depth.

What is near Garwood and El Campo for a boring project?
Garwood is in Colorado County, 20.0 miles southeast of the county seat, Columbus. Its mapped community covers 5.43 square miles at an elevation of 159 feet, and its ZIP code is 77442. Nada is 2.8 miles southeast, Rock Island is 10.5 miles northwest and Eagle Lake is 11.3 miles northeast. El Campo, the nearest larger city, is 18.7 miles southeast. Our Yukon, Oklahoma yard is 468 road miles away, a 9.2 hour drive, so distance is part of planning a Garwood mobilization.
Places near Garwood
- Directional boring in Nada: 2.8 miles southeast
- Directional boring in Rock Island: 10.5 miles northwest
- Directional boring in Eagle Lake: 11.3 miles northeast
- Directional boring in Sheridan: 16.3 miles west
- Directional boring in El Campo: 18.7 miles southeast
What kinds of bores fit Garwood routes near Mansfield Road?
- Highway crossing: A bore beneath FM 1693 keeps the existing roadway uncut, with the utility owner’s permit and TxDOT cover requirements built into the plan.
- Water service: A route near Gold Road needs the address specific water provider confirmed before we plan the bore and locate existing lines.
- Fiber conduit: Along Mansfield Road, a fiber bore can pass beneath pavement while hydrovac potholes expose marked utilities on the route.
- Creek crossing: A West Mustang Creek bore needs a planned path below the channel and a jurisdiction check during planning.
- Electric conduit: Near Lions Park Drive, we confirm the electric line owner before planning a conduit route through the reported Colorado County service area.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Garwood bore near Lions Park Drive?
Start with a map pin or address near Lions Park Drive or West Mustang Creek; the exact spot shows which road, drainage or property access the bore must fit. For a Garwood bore near FM 333, tell us what will go underground, plus pipe or conduit size and footage. A sketch or plans help us trace the route and identify crossings before we scope the work.
The 468 road miles from Yukon shape mobilization for a Garwood job. Dacosta sandy clay loam and the area’s mapped heavy clay affect drilling and reaming, while a route across FM 1693 adds highway permit and cover planning. We also consider pipe size and length, utilities to expose, pavement, creek or drainage crossings, pits, excavator time and sand backfill. High profile or emergency work can change the required scope around Lions Park Drive or West Mustang Creek.
Questions people ask about boring in Garwood
Does Trinity take directional boring jobs in Garwood, Colorado County, and who staffs them?
Yes. We take Garwood work in Colorado County and handle the job from the first call through the bore log. Our crews work from the Yukon office and from satellite yards operated by partner drilling contractors we have vetted. A route near West Mustang Creek can be scoped from its address, line size and planned path.
What do Garwood’s housing ages near Mansfield Road mean for a replacement bore?
The American Community Survey 2019 to 2023 estimates put the median housing year at 1991, with 19 percent of units built before 1960 and 43 percent in 2000 or later. A replacement route near Mansfield Road may meet older buried services. We pothole marked lines before drilling near them, since surface marks do not show depth.
Does Dacosta soil in Garwood corrode steel, and what pipe can be used?
The USDA soil survey maps high steel corrosion risk across 57 percent of Garwood, including areas with Dacosta soil. For crossings near County Road 113 Road, the line owner selects any coating for steel casing or tracer wire. HDPE avoids the soil corrosion concern for the pipe itself. We use the planned material and route to shape a bore near FM 333.
What ground does a Garwood bore pass through in Dacosta soil?
The USDA soil survey maps Dacosta sandy clay loam across 29 percent of Garwood. At about 40 inches below the surface, clay is mapped across 77 percent of the area, with sandy clay loam across 15 percent. These are mapped patterns rather than site borings; a route near West Mustang Creek still needs its own ground and depth planning.
Is a Garwood bore likely to hit rock near West Mustang Creek?
Bedrock is not mapped in Garwood’s top five feet, but deeper rock is not ruled out. The geologic map identifies Delta Sand and Silt of Late Pleistocene age, with sand, silt, clay and gravel. For a bore near West Mustang Creek, we plan to the site and track the drill head rather than assume the mapped surface conditions continue at depth.
Who approves a Garwood bore beneath FM 1693, and which office reviews it?
For work in FM 1693 right of way, TxDOT’s Yoakum District reviews the utility permit. The utility owner files in TxDOT’s RULIS system, and we prepare the bore plan and profile for that filing. TxDOT sets cover requirements for the line type and crossing, with the district able to require a different depth.
How far is Garwood from the Yukon office, and does El Campo change the job plan?
Garwood sits 468 road miles from our Yukon, Oklahoma main office, a 9.2 hour drive we factor into project scheduling. El Campo is 18.7 miles southeast of Garwood, but it does not change the distance for a crew mobilizing from Yukon. A map pin near Gold Road helps us understand the route, site access and work scope before planning mobilization.
How much Texas811 notice should I allow for a Garwood bore near Gold Road?
For a bore along Gold Road, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If work slips more than 14 days past the original notice, make a new request. Marks worn off or moved must be refreshed through Texas811 before work continues.
What affects the cost of directional boring in Garwood near FM 1693?
The job scope sets the price, not just the length. A route near FM 1693 may involve highway permit planning, while Garwood’s clay affects drilling and reaming. We also consider pipe size, footage, utilities to expose, pavement, creek crossings, pits and equipment time. The 468 road miles from Yukon affect mobilization for a Garwood job.
Where the Garwood facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Garwood
- U.S. Census Bureau, TIGER/Line 2024: Garwood boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Garwood population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Garwood housing units and year built
- Macrostrat geologic map compilation: map units under Garwood
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Colorado County
- U.S. Geological Survey, Elevation Point Query Service: Garwood elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Garwood
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Garwood
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Garwood, Texas
Type the address of your job in Garwood. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Garwood
Same county: Columbus · Weimar · Glidden. All counties: Texas county list.
