trinityboringsolutions.com

Nada Texas Directional Boring: Dacosta Soil, FM 333, Colorado River

Quick Answer: County Road 113 Road, Old Nada Road and County Road 182 are among 37.24 public road miles, with the Colorado River running through the community; Trinity does directional boring, also called horizontal directional drilling (HDD), for crossings here. Nada is 470 road miles from our Yukon, Oklahoma main office, and FM 333 runs inside the mapped community boundary. Dacosta sandy clay loam is mapped across 20 percent of the area. Clay deeper down can grip pipe, so the bore needs careful fluid and reaming control.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Nada bores at a glance

  • Unincorporated community in Colorado County, Texas. Population 231 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 470 miles, about 9.3 hours of driving.
  • Ground: Dacosta soil is mapped on 20 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 333. State permit office: TxDOT Yoakum District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Colorado River.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near County Road 113 Road in Nada?

County Road 113 Road, Old Nada Road and County Road 182 stand out among Nada’s 37.24 public road miles, while the Colorado River runs through the community. The Census Bureau counted 231 residents in 2020; it does not publish yearly population estimates for unincorporated places. We bore for water, sewer, gas, electric conduit and fiber, including routes along those roads where a line needs to pass beneath pavement or a driveway.

Our main office is in Yukon, Oklahoma, and Nada work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a small service such as a 3/4 inch line or a larger casing job up to 48 inches near the Colorado River, our family business brings experience dating to 1965 and directional boring work since 1982.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Nada soil like to bore near Dacosta?

The USDA soil survey maps Dacosta sandy clay loam across 20 percent of Nada, with Edna loam at 19 percent and Laewest clay at 13 percent. Loam makes up 32 percent of the mapped surface texture, while clay accounts for 19 percent. At about 40 inches below the surface, clay is mapped across 66 percent of the area and the average clay content is 37 percent. These are mapped soil patterns, not test borings, so the exact mix along County Road 113 Road still needs to be checked at the bore site.

USDA soil survey, inside the Nada mapped community boundaryWhat is mapped
Soil series mappedDacosta 20 percent, Edna 19 percent, Norwood 14 percent, Laewest 13 percent and Brazoria 7 percent
Texture at the surfaceloam 32 percent, sandy clay loam 20 percent and clay 19 percent
Texture about 40 inches downclay 66 percent, silt loam 9 percent and sand 6 percent
Engineering class about 40 inches downfat clay (CH) 66 percent, lean clay (CL) 18 percent and sand with silt (SP SM) 6 percent
Average clay content about 40 inches down37 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches27 percent of the area
Flood prone soils9 percent of the area
High corrosion risk for uncoated steel64 percent of the area

The USDA soil survey maps no bedrock within 60 inches in Nada, while the geologic map identifies Pleistocene Beaumont Formation, areas predominantly sand. That sand and fine alluvium can loosen behind a drill head, even though clay is common deeper in the soil profile. Seasonal water tables are mapped within 60 inches across 27 percent of the area, and flood prone soils across 9 percent, so pits near the Colorado River may need pumping and a crossing plan below the channel. High steel corrosion risk is mapped across 64 percent; the line owner should select any coating for steel casing or tracer wire.

What does it take to bore Nada clay?

Nada’s mapped clay and sandy Beaumont Formation call for a plan that suits the ground along the bore path. We check the route, expose marked lines and track the drill head as it moves beneath streets such as County Road 182.

  1. Clay control: With clay mapped across 66 percent of Nada at about 40 inches, we use a fluid mix and staged reaming suited to sticky ground and pull pipe after opening the hole.
  2. Sandy intervals: Beaumont Formation sand can fall behind the bit, so we keep the pipe ready before the final ream on a route near the Colorado River.
  3. Wet pits: Seasonal water tables are mapped within 60 inches across 27 percent of Nada, so a pit near County Road 113 Road may need a pump and a compact layout.
  4. Utility checks: Before a bore approaches a marked line beside FM 333, we pothole it with hydrovac, then track the drill head from the surface and log depth and pitch.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Where does a line have to go under the Colorado River in Nada?

FM 333 runs for 1.7 roadway miles inside the mapped community boundary, and Texas State Highway 71 runs along or touches that boundary. A bore beneath either state road needs its route and depth planned around the highway right of way. County Road 113 Road is the longest named street at 3.18 miles, followed by Old Nada Road at 2.35 miles and County Road 182 at 0.87 miles. Boring can carry a line beneath those roads and driveways without cutting the surface.

CrossingTypeMapped extentWho has a say
FM 333State highway1.7 roadway miles insideState highway office
Texas State Highway 71Highway nearbyRuns along or touches the city limitsState highway office
Colorado RiverStream4.49 channel miles insideChecked for Corps of Engineers jurisdiction
West Mustang CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Nada or within one mile outside its boundary, so there is no mapped track crossing to plan for here. The Colorado River has 4.49 channel miles in the community, and no mapped street crossing of a named stream is recorded inside it. West Mustang Creek lies 0.9 miles outside the boundary. A planned river or creek bore needs a check for U.S. Army Corps of Engineers jurisdiction, and pits near the Colorado River may need pumping where seasonal water is present.

Do I need a permit to bore in Colorado County in Nada?

Nada is an unincorporated community, so its public streets are under county or state authority, not a city government. For a bore on FM 333 or the part of Texas State Highway 71 that touches the mapped community boundary, TxDOT’s Yoakum District reviews the utility permit. The utility that owns the line files through TxDOT’s RULIS system; we prepare the bore plan and profile and work under that utility’s permit. On state highway crossings, cover depth depends on line type, and the district may set a different depth in its permit. A Colorado River crossing is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Colorado County near Nada?

The water provider for a specific address along County Road 113 Road needs to be confirmed with the county or local water district before a bore is planned. The available records do not identify a provider matched to Nada. Utilities reporting electric service in Colorado County include AEP Texas Central, CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative, San Bernard Electric Cooperative and Wharton County Electric Cooperative. The line owner must be confirmed before conduit specifications are set for a route beside FM 333.

Line ownerWhat it isSourceSize
AEP Texas Central, CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative, San Bernard Electric Cooperative and Wharton County Electric CooperativeElectric utilities reporting service in Colorado CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Nada’s median housing year at 1991; 20 percent of homes were built before 1960, and 12 percent in 2000 or later. That mix can mean a job serves either an older line being replaced or a newer connection near Old Nada Road. We expose each marked utility on the bore path with hydrovac before drilling close to it, since paint shows position but not depth; for example, a marked line beneath County Road 182 is pothole checked first.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Where is Nada in relation to El Campo?

Nada is in Colorado County, about 145 feet above sea level, and covers 6.67 square miles within its mapped community boundary. Its ZIP codes are 77442 and 77460. Garwood is 2.8 miles northwest, Eagle Lake is 12.2 miles north, and Rock Island is 13.2 miles northwest. El Campo, the nearest larger city, is 16.2 miles southeast; Columbus, the county seat, is 22.6 miles northwest. From our Yukon, Oklahoma main office, Nada is 470 road miles and 9.3 drive hours away, which affects mobilization for work along FM 333.

Places near Nada

Which jobs call for a bore near County Road 182 in Nada?

  • Highway crossing: A line under FM 333 needs a bore plan that accounts for the state highway right of way and the utility permit.
  • Water service: A connection near Old Nada Road starts with confirming the water provider for that address with the county or local water district.
  • Fiber route: A fiber line beneath County Road 113 Road can avoid an open cut across the roadway and nearby driveways.
  • River crossing: A route beneath the Colorado River needs channel planning and a jurisdiction check, with wet pits considered near the banks.
  • Electric conduit: A conduit route beside Texas State Highway 71 needs the electric line owner confirmed before conduit requirements are set.
  • Drainage bore: A line near West Mustang Creek needs a route suited to the drainage and any wet ground at the pits.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near FM 333 in Nada?

For a bore near FM 333, send the address or map pin, what will go in the ground, pipe or conduit size and footage; a sketch or plans help. A route that starts on County Road 113 Road and passes under a drainage feature can need a different layout from a short service connection. The route and site details help us work out the scope.

The biggest local cost drivers are the ground and the crossings. Nada’s mapped clay at about 40 inches can make reaming and pipe pull more demanding, while sand in the Beaumont Formation can need extra support to keep the hole open. The number of utilities to expose, pavement on FM 333, creek or drainage crossings, pit and excavator needs, and line size also matter. Mobilization is part of the scope because Nada is 470 road miles from Yukon.

Questions people ask about boring in Nada

Does Trinity take directional boring work in Nada and Colorado County?

Yes. We take directional boring work in Nada, and the job can be staffed by our own crews or a partner contractor from a satellite yard. You deal with Trinity throughout the work, from the first call through the bore log. For a route near County Road 113 Road, we plan around the actual access and ground.

Will a bore in Nada hit rock?

The USDA soil mapping does not show bedrock within the top five feet in Nada, but that does not rule out rock deeper down. Its geologic map shows Pleistocene Beaumont Formation, areas predominantly sand. A bore near the Colorado River still needs the route checked against site conditions rather than treating a map as a drilling log.

Who approves a bore under FM 333 in Nada?

For work in the FM 333 right of way, the utility owner applies for the TxDOT utility permit through RULIS, and the TxDOT Yoakum District reviews it. We provide the bore plan and profile for the utility owner’s filing and work under the issued permit. The permitted cover depth depends on the type of line and the district’s requirements.

Can you bore a line under the Colorado River in Nada?

A bore under the Colorado River can be planned, but the route needs a check for U.S. Army Corps of Engineers jurisdiction. The river has 4.49 channel miles in the mapped community, and seasonal water tables occur within 60 inches across 27 percent of Nada. Those conditions can affect the crossing depth, pit placement and water handling.

Which electric company owns lines in Nada, Colorado County?

Public records report AEP Texas Central, CenterPoint Energy, Bluebonnet Electric Cooperative, Fayette Electric Cooperative, San Bernard Electric Cooperative and Wharton County Electric Cooperative as serving the county. That does not establish which company owns a line at a particular Nada address. Confirm the line owner before setting conduit specifications for a bore near FM 333.

Who controls County Road 182 in Nada, and can a bore avoid cutting it?

Nada is unincorporated, so there is no city government; public street authority is with the county or state. A bore under County Road 182 can leave the roadway surface uncut, with entry and exit pits placed in dirt where the site allows. The authority for the specific route should be confirmed before work is planned.

How early should I request utility marks for County Road 113 Road in Nada?

Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no more than 14 days before it. If the start slips more than 14 days past the original notice, request a new ticket. For work by County Road 113 Road, worn or moved marks must be refreshed through Texas811 before work continues.

Does being near El Campo make a Nada bore farther from your office?

Nada is 470 road miles and 9.3 drive hours from our Yukon, Oklahoma main office; being 16.2 miles from El Campo does not change that distance. The distance from Yukon can affect mobilization and the job plan. For a bore near El Campo’s direction of travel or along Old Nada Road, the address and route help define the scope.

What affects the cost of a directional bore near FM 333 in Nada?

The quote depends on footage, line size, Nada’s clay and sand conditions, utilities to expose, pavement and any drainage crossing. A bore near FM 333 may also need a state highway permit and its required cover depth. Pit work, excavator time, sand backfill, urgency and the 470 road miles from Yukon can affect the job scope.

Where the Nada facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Nada

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Nada, Texas

Type the address of your job in Nada. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Nada

Same county: Columbus · Weimar · Glidden · Sheridan. All counties: Texas county list.