trinityboringsolutions.com

Grandview Texas Directional Boring: Heiden Clay, Union Pacific, Hayden Creek

Quick Answer: What does the top five feet look like near Grandview’s Hayden Creek crossing, and what lies below it? The USDA soil survey maps Heiden clay across 78 percent of the city, and the Eagle Ford Formation is the mapped geologic unit. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Grandview, Texas, for routes crossing Interstate 35. Grandview is 248 road miles from our Yukon, Oklahoma main office, with Union Pacific track inside city limits. Heavy clay can grip pipe, so we manage fluid and ream in stages.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Grandview bores at a glance

  • Incorporated city in Johnson County, Texas. Population 1,946 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 248 miles, about 4.8 hours of driving.
  • Ground: Heiden soil is mapped on 78 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 12 percent of the area.
  • Highways inside the boundary: Interstate 35, Texas State Highway 81, FM 916 and FM 4. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: Union Pacific, with 3 mapped street and rail crossings.
  • Named streams inside the boundary: Hayden Creek.
  • Public water: City of Grandview, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for Grandview directional boring near Union Pacific?

Grandview is in Johnson County, where the Census Bureau Vintage 2024 estimate puts the population at 1,946. We install water, sewer, gas, electric conduit and fiber lines, with routes that can run beneath 3rd Street or reach properties near Interstate 35. Knowing the proposed route matters in a city with 24.61 public road centerline miles, because a bore plan must account for the street and other crossings.

Our main office is in Yukon, Oklahoma, and Grandview work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our equipment handles lines from 3/4 inch service connections to 48 inch casing and bores from 10 feet to 5,000 feet. We are a family business that started in 1965, with directional boring work since 1982; the range fits jobs from a service line to a major Interstate 35 crossing.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

How does Heiden soil affect a Grandview bore?

The USDA soil survey maps Heiden soil across 78 percent of Grandview and Ferris Heiden complex across another 12 percent. Houston Black clay covers 7 percent. Clay makes up 99 percent of the mapped surface texture and 99 percent of the texture at about 40 inches below the surface; the average clay content at that depth is 51 percent. These are mapped soil patterns, not test borings. For a bore near Louisiana Street, that heavy clay can stay in the hole but also ball on the reamer and grip the pipe.

USDA soil survey, inside the Grandview city limitsWhat is mapped
Soil series mappedHeiden 78 percent, Ferris 12 percent and Houston Black 7 percent
Texture at the surfaceclay 99 percent
Texture about 40 inches downclay 99 percent
Engineering class about 40 inches downfat clay (CH) 99 percent
Average clay content about 40 inches down51 percent
Bedrock mapped within 60 inches12 percent of the area (0 percent hard rock, 12 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel100 percent of the area

The USDA survey maps weathered bedrock within 60 inches in 12 percent of Grandview, with typical bedrock depth at 45 inches; hard bedrock is not mapped within 60 inches. That points to mostly soil drilling, with slower progress where the bit meets weathered rock. A seasonal water table is not mapped within 60 inches, and flood prone soils cover 1 percent of the mapped area near Hayden Creek. High steel corrosion risk is mapped across the area, so the line owner should consider casing and tracer wire materials; HDPE is not affected by soil corrosion. The Eagle Ford Formation, of Late Cretaceous age, includes shale, siltstone and limestone.

What does it take to bore Grandview clay?

Heiden clay dominates the Grandview soil map, so we plan for sticky cuttings and a hole that can grip the product pipe. A route near Hayden Creek also needs a depth plan that respects the channel.

  1. Heiden clay holds an open hole but can stick to the reamer; we use thinner fluid with polymer and ream in stages on a Grandview route.
  2. Heavy clay can build pressure under pavement, so we watch fluid returns closely when a bore approaches Interstate 35 or a paved street.
  3. Before the drill nears a marked utility, we hydrovac pothole it to confirm its depth; Grandview paint marks alone show position, not depth.
  4. We track the drill head from the surface and log depth and pitch, then pull pipe the same day the hole is opened to limit clay grip.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Where does a Grandview line go under Hayden Creek?

Interstate 35 has 2.6 mapped roadway miles inside Grandview, while Texas State Highway 81 has 1.8, FM 916 has 1.5 and FM 4 has 0.7. These routes can put a bore near busy pavement or a state right of way, where the crossing plan and permit path matter. The longest named streets are 3rd Street at 1.52 miles, 4th Street at 1.51 miles and Louisiana Street at 1.46 miles. A bore can pass beneath pavement instead of opening a trench through it.

CrossingTypeMapped extentWho has a say
Interstate 35Interstate2.6 roadway miles insideState highway office
Texas State Highway 81State highway1.8 roadway miles insideState highway office
FM 916State highway1.5 roadway miles insideState highway office
FM 4State highway0.7 roadway miles insideState highway office
Union PacificRailroad1.5 track miles insideThe railroad
Hayden CreekStream0.07 channel miles insideChecked for Corps of Engineers jurisdiction
South Fork Chambers CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Middle Fork Chambers CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Rock Tank CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 1.5 track miles in Grandview on the Fort Worth Subdivision, and public mapping shows 3 street and rail crossings. A route that crosses those tracks needs an agreement with Union Pacific, the track owner. Hayden Creek has 0.07 channel miles inside the city and 1 mapped street crossing. No lakes or ponds are mapped within one mile, so creek and drainage conditions are the water features to check for a local route.

Whose permission does a Grandview bore in Johnson County need?

Grandview is incorporated, so its city streets belong to the city itself. On Interstate 35, Texas State Highway 81, FM 916 or FM 4 right of way, the line owner, not the driller, files for a TxDOT utility permit through RULIS. We prepare the bore plan and profile for that filing, and the TxDOT Fort Worth District reviews it. TxDOT cover rules call for 60 inches for electric and communication lines at highway crossings, 48 inches running along the right of way, 60 inches for water crossings and 36 inches along it; pressurized sewer crossings need 60 inches. A different depth may be set in the permit. Highway pavement is bored or tunneled beneath, and a Union Pacific track crossing needs its owner’s agreement. Planning a Hayden Creek crossing includes checking for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Grandview near the City of Grandview water system?

The City of Grandview public water system uses groundwater wells and reports 724 service connections serving 1,879 people. For electric service in Johnson County, Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative and United Electric Cooperative Service report service. Those records do not identify the provider at every address, so we confirm the line owner before planning a conduit bore near 4th Street or another route.

Line ownerWhat it isSourceSize
City of GrandviewPublic water systemGroundwater wells724 connections, 1,879 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Johnson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Grandview’s median housing year at 1984: 28 percent of housing was built before 1960, 40 percent from 1960 to 1999 and 32 percent in 2000 or later. That mix can mean either replacing older lines or adding a new service. Along Louisiana Street, we hydrovac pothole each marked utility on the planned bore path before drilling near it; paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Where is Grandview in relation to Alvarado?

Grandview is an incorporated city in Johnson County, at an elevation of 695 feet and covering 1.98 square miles. The city is in ZIP code 76050. Itasca and Covington are each 7.8 miles away, south and southwest respectively; Coyote Flats is 9.0 miles northwest. Alvarado, the nearest larger city, is 9.9 miles north, while Maypearl is 10.5 miles east. Cleburne, the county seat, is 14.8 miles northwest. From our Yukon yard, Grandview is 248 road miles and a 4.8 hour drive, which is part of planning mobilization for work near Interstate 35.

Places near Grandview

What would we bore near 3rd Street in Grandview?

  • Highway crossing: A route beneath Interstate 35 needs a bore plan that accounts for travel lanes, pavement and the TxDOT right of way.
  • Water service: A connection near the City of Grandview water system needs a route checked for marked lines before drilling begins.
  • Creek crossing: A bore beneath Hayden Creek can leave the channel and banks uncut, with depth and jurisdiction checked during planning.
  • Rail crossing: A route through Union Pacific track territory needs the railroad owner’s crossing agreement and its stated conditions.
  • Street replacement: A bore along Louisiana Street can replace a buried line without opening the street surface along the route.
  • Fiber route: A conduit path near 3rd Street can carry fiber beneath pavement, with utility locations exposed before the drill approaches.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Grandview quote near Interstate 35?

A map pin beside Interstate 35 matters because a small change in the route can add a highway, street or utility crossing. Send the job address or pin, what is going in the ground, pipe or conduit size and footage. A sketch or plans help us see how the route relates to 3rd Street, Hayden Creek or the Union Pacific track.

Heiden clay is the first price consideration because it can stick to tooling and grip the pipe, which affects reaming and pullback. We also account for the number of marked utilities to expose, crossings of Interstate 35 or Union Pacific track, pavement or concrete, and any creek or drainage route near Hayden Creek. Length, pipe size, pits, excavator time and sand backfill shape the work too. Grandview’s 248 road miles from Yukon affect mobilization, and urgent or high profile work can change the plan.

Questions people ask about boring in Grandview

Does Trinity Boring Solutions take Grandview jobs in Johnson County, and who staffs them?

Yes. We take directional boring work in Grandview, Johnson County, and keep Trinity involved from the first call through the bore log. Our own crews and crews from satellite yards operated by partner drilling contractors we have vetted can handle the work. For a route near Interstate 35, we plan around the actual crossings and ground.

Who owns the electric lines in Grandview, Johnson County, and who confirms conduit specs?

The provider depends on the address. Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative and United Electric Cooperative Service report electric service in Johnson County. We confirm the line owner for the specific Grandview location before planning an electric conduit bore, and that owner can confirm the conduit requirements for its line near 4th Street or elsewhere.

Who controls Louisiana Street in Grandview, Johnson County, and can a bore avoid cutting it?

Grandview is incorporated, so Louisiana Street is a city street. Directional boring can pass beneath the street without opening a trench through its pavement. The actual route still has to account for utilities and other crossings, so we use the plans and exposed line locations to guide the bore.

How old are homes and buried lines near 4th Street in Grandview?

The American Community Survey 2019 to 2023 five year estimates give Grandview a median housing year of 1984. Older housing can mean a replacement bore, while newer development can call for a new service; the home age does not establish the age or location of buried lines. We expose marked utilities along a proposed 4th Street bore before drilling near them.

Does Heiden soil in Grandview corrode steel, and what pipe should I use?

The Grandview soil survey maps high steel corrosion risk across the area, including where Heiden soil is mapped. The line owner selects the material and any coating for steel casing or tracer wire. HDPE does not have the same soil corrosion concern, but the right pipe depends on the line and project requirements.

What ground will a bore pass through in Grandview’s Heiden soil?

The USDA soil survey maps Heiden soil across 78 percent of Grandview. Clay makes up 99 percent of the mapped texture at about 40 inches below the surface, with an average clay content of 51 percent at that depth. Sticky clay can ball on a reamer, so staged reaming and a timely pipe pull help manage the bore.

Can I reach Trinity after hours about an urgent Grandview bore near Louisiana Street?

Yes. A person answers our phone at (405) 409-7423 24 hours a day. For an urgent bore near Louisiana Street, share the location and what line or conduit is involved so we can understand the work and response needs.

How much notice does Texas811 need for a Grandview bore near 3rd Street?

For a bore near 3rd Street, place the Texas811 locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. Texas811 describes that as two working days. If the start slips more than 14 days past the original notice, make a new request; have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of a Grandview directional bore near Interstate 35?

Heiden clay can add reaming and pipe handling demands, while crossings of Interstate 35, Union Pacific track or utilities add planning and exposure work. Length, pipe or conduit size, pavement, creek or drainage crossings, pits and excavator time also affect the price. Mobilization matters because Grandview is 248 road miles from our Yukon yard.

Where the Grandview facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Grandview

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Grandview, Texas

Type the address of your job in Grandview. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Grandview

Same county: Burleson · Cleburne · Joshua · Venus · Keene · Mansfield · Pecan Plantation · Godley · Rio Vista · Briaroaks · Cross Timber · Cresson. All counties: Texas county list.