trinityboringsolutions.com

Cresson Texas Directional Boring: Aledo Soil, Fall Creek, Fort Worth and Western Railroad

Quick Answer: What does the top five feet near US 377 look like, and what lies beneath it? The USDA soil survey maps Aledo soil and bedrock within that depth. We do directional boring, also called horizontal directional drilling (HDD), in Cresson, including routes beneath the Fort Worth and Western Railroad. Cresson is 239 road miles from our Yukon, Oklahoma main office, near Fall Creek. The mapped clay and shallow bedrock can make reaming slower and call for staged passes.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Cresson bores at a glance

  • Incorporated city in Hood County, Johnson County and Parker County, Texas. Population 2,050 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 239 miles, about 4.7 hours of driving.
  • Ground: Aledo soil is mapped on 48 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 70 percent of the area.
  • Highways inside the boundary: US 377 and Texas State Highway 171. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: Fort Worth and Western Railroad, with 3 mapped street and rail crossings.
  • Named streams inside the boundary: Fall Creek, Dickeys Branch and South Bear Creek.
  • Public water: City of Cresson, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near the Fort Worth and Western Railroad in Cresson?

What does the top five feet around Bluebonnet Drive look like, and what is below it? The USDA soil survey maps Aledo soil and bedrock within that depth, so a route may move from clay into rock. The Census Bureau Vintage 2024 estimate puts Cresson at 2,050 people across Hood County, Johnson County and Parker County. We install water, sewer, gas, electric conduit and fiber along local roads and service routes.

Our main office is in Yukon, Oklahoma, and Cresson work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have been boring since 1982, and that experience matters where Aledo clay meets the shallow bedrock mapped around Cresson. We are a family business that started in 1965, and Trinity stays involved from the first call through the bore log.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Cresson and its Aledo soil?

The USDA soil survey maps Aledo soil across 48% of Cresson, with the Aledo Bolar association also covering 48%. Surface textures include gravelly clay loam across 48%, clay loam across 21% and clay across 13%. At about 40 inches below the surface, bedrock is mapped across 66% of the area and silty clay across 15%; average clay content there is 38%. No sandy area is mapped at that depth in Cresson, so we plan boring with that subsurface information in mind. These are mapped patterns, not test borings, so a route near Old Granbury Road still needs site specific planning.

USDA soil survey, inside the Cresson city limitsWhat is mapped
Soil series mappedAledo 48 percent, Bolar 13 percent, Sanger 9 percent, Sunev 7 percent and Venus 7 percent
Texture at the surfacegravelly clay loam 48 percent, clay loam 21 percent and clay 13 percent
Texture about 40 inches downbedrock 66 percent, silty clay 15 percent and clay loam 8 percent
Engineering class about 40 inches downfat clay (CH) 20 percent and lean clay (CL) 14 percent
Average clay content about 40 inches down38 percent
Bedrock mapped within 60 inches70 percent of the area (61 percent hard rock, 9 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils4 percent of the area
High corrosion risk for uncoated steel23 percent of the area

Bedrock is mapped within 40 inches across 69% of Cresson, and hard bedrock within 60 inches across 61%. The typical mapped depth is 19 inches, so a bore may meet rock early; hard rock can slow the cut and a soil to rock change can push the head off line. No seasonal water table is mapped within 40 or 60 inches, while flood prone soils cover 4%. High steel corrosion risk covers 23%, a material question for casing or tracer wire. The Cenozoic Stony Calcareous Clay Solution Residuum includes clay and limestone, with fractured limestone below some soils.

How do we bore through Cresson soil and bedrock?

Aledo soil and the bedrock mapped near Bluebonnet Drive call for a route planned around changing ground. We track the drill head from the surface and log its depth and pitch as the bore advances.

  1. We plan reaming for the clay mapped in Aledo soil; clay can cling to the reamer, so staged passes help manage the hole.
  2. Where the survey maps hard bedrock beneath Cresson, we allow for slower cutting and check the drill path as the material changes.
  3. Before a bore near Old Granbury Road, we expose each marked utility on the route because surface paint does not show its depth.
  4. At a Fall Creek crossing, we plan the path beneath the channel and check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

Where might a line go under Fall Creek in Cresson?

US 377 runs 11.2 mapped roadway miles inside Cresson, and Texas State Highway 171 adds 2.5 miles. Old Granbury Road is the longest named street at 2.46 miles in the city; Bluebonnet Drive runs 1.33 miles and Hughie Long Road 1.29 miles. Those routes create different access and crossing conditions. A bore beneath existing highway pavement is installed by boring or tunneling, while the planned route and cover must account for the particular road and line.

CrossingTypeMapped extentWho has a say
US 377US highway11.2 roadway miles insideState highway office
Texas State Highway 171State highway2.5 roadway miles insideState highway office
Fort Worth and Western RailroadRailroad4.07 track miles insideThe railroad
Fall CreekStream2.09 channel miles insideChecked for Corps of Engineers jurisdiction
Dickeys BranchStream0.92 channel miles insideChecked for Corps of Engineers jurisdiction
South Bear CreekStream0.15 channel miles insideChecked for Corps of Engineers jurisdiction
Walnut CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Ike BranchStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Mustang CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Little Falls CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Fort Worth and Western Railroad has 4.07 track miles inside Cresson, with 3 mapped street and rail crossings. Fall Creek runs 2.09 channel miles in the city, and Dickeys Branch 0.92 miles; six mapped street crossings cross named streams. A route near either creek needs planning for channel depth and ground conditions. A creek crossing is also checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who approves a bore in Hood County and Cresson?

Cresson is incorporated, so its city streets, including Hughie Long Road, belong to the city itself. For work in the right of way of US 377 or Texas State Highway 171, TxDOT reviews the utility permit through its Fort Worth District. Electric and communication lines crossing a highway need at least 60 inches of cover below the lowest point of the crossed grade; water lines need the same crossing cover. The utility owner files in TxDOT’s RULIS system, using our bore plan and profile. A crossing of the Fort Worth and Western Railroad needs an agreement with the railroad owner. Fall Creek is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Cresson water system?

The City of Cresson public water system uses groundwater wells and reports 95 service connections serving 285 people. The system is privately owned, so its name alone does not identify the water provider at every Cresson address. In Hood County, Oncor Electric Delivery Company, Texas New Mexico Power, Tri County Electric Cooperative and United Electric Cooperative Service report electric service. We confirm the line owner for the address before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of CressonPublic water systemGroundwater wells95 connections, 285 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Hood County, Johnson County and Parker CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Cresson’s 2008 median housing year, based on American Community Survey 2019 to 2023 five year estimates, helps us account for reported housing age when planning underground work. It estimates 4% of homes were built before 1960 and 61% in 2000 or later. A replacement line on Bluebonnet Drive may need to follow older buried services, while a newer address may need a service extension. We hydrovac pothole each marked utility on the planned path before drilling near it; for example, a proposed bore beneath Bluebonnet Drive requires exposing the marked lines first.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

How far is Cresson from Godley and the surrounding area?

Cresson spans Hood, Johnson and Parker counties, at an elevation of 1,054 feet and covering 11.55 square miles. For underground work across Cresson, we use ZIP codes 76035 and 76049 to frame the service area. Godley is 6.9 miles southeast, DeCordova is 8.3 miles southwest, and Granbury is 11.5 miles southwest; Granbury is also the Hood County seat. From our Yukon yard, Cresson is 239 road miles away, a 4.7 hour drive. That distance is part of planning mobilization for work on US 377 or near Fall Creek.

Places near Cresson

What would we bore beneath Bluebonnet Drive in Cresson?

  • Highway crossing: A bore beneath US 377 keeps the route under the highway pavement, with cover and access planned for the line type.
  • Water service: A service near the City of Cresson system needs the address and existing line location confirmed before we set the bore path.
  • Fiber conduit: A run along Bluebonnet Drive can pass beneath pavement and driveways without opening a trench across each surface.
  • Creek crossing: A route beneath Fall Creek needs depth planning under the channel and a jurisdiction check during planning.
  • Rail crossing: A line beneath the Fort Worth and Western Railroad needs a railroad agreement that sets crossing conditions.
  • Street service: Hughie Long Road is a possible route for a water, sewer or electric conduit bore around existing marked utilities.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a bore near US 377 in Cresson?

For a quote, send the Cresson address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help. The route near US 377 matters because pavement, right of way and the specific crossing affect the bore plan. A map pin near Fall Creek also helps us see whether drainage or channel conditions change the route.

Ground, crossings and logistics shape the price. Aledo clay and bedrock can change drilling time and reaming; the Fort Worth and Western Railroad or a US 377 crossing adds coordination and route constraints. Pavement, exposed utilities, creek or drainage crossings, pits, excavator time and sand backfill also affect the work. The 239 road miles from Yukon influence mobilization, while bore length, line size and emergency timing depend on the scope at the Cresson site.

Questions people ask about boring in Cresson

Does Trinity take directional boring jobs in Cresson and Hood County, and how are crews assigned?

Yes. In Cresson and across Texas, we take directional boring work and plan each route around underground conditions. Our crews do the work, and vetted partner drilling contractors run satellite yards that can support Cresson jobs. You work with Trinity from the first call through the bore log, whichever crew is on site; the Fort Worth and Western Railroad is one local crossing that may shape the plan.

For boring plans in Cresson, who runs the public water system and where does its water come from?

The City of Cresson public water system uses groundwater wells. Public records list 95 service connections and 285 people served in Cresson, figures we consider when planning underground work. The system is privately owned, and its name does not establish who supplies water at every address. Confirm the provider and existing line location before planning a service bore near Bluebonnet Drive.

Which electric utilities report service in Hood County near Cresson, and who confirms conduit specs?

Oncor Electric Delivery Company, Texas New Mexico Power, Tri County Electric Cooperative and United Electric Cooperative Service report electric service in Hood County. Those records do not identify the provider at every Cresson address. Confirm the line owner for the job location and conduit requirements before planning a bore near US 377.

Does the city or county control Hughie Long Road in Cresson, and can we avoid cutting it?

Cresson is an incorporated city, so Hughie Long Road is a city street. A directional bore can pass beneath a street without cutting its surface, subject to the route and approvals that apply to the work. If the route reaches US 377 right of way, TxDOT’s utility permit process applies.

What do Cresson’s housing ages near Bluebonnet Drive mean for replacement bores?

The American Community Survey 2019 to 2023 five year estimates put the median housing year at 2008, with 4% built before 1960 and 61% built in 2000 or later. Those figures do not date buried lines at a specific address. For a replacement bore near Bluebonnet Drive, we expose marked utilities before drilling near them.

What ground should I expect for a Cresson bore through Aledo soil?

The USDA soil survey maps Aledo soil across 48% of Cresson, often as gravelly clay loam at the surface. About 40 inches down, bedrock is mapped across 66% of the area and silty clay across 15%. That mix can mean sticky clay and an early rock contact, so the bore plan near Old Granbury Road should allow for changing material.

Can I reach Trinity after hours about an urgent Cresson bore near Hughie Long Road?

Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day for urgent work. If the job is near Hughie Long Road, have the address or map pin and the line type ready so we can discuss access, marked utilities and the route before planning the response.

How early should I request 811 marks for a Cresson bore on Old Granbury Road?

For an Old Granbury Road bore, submit the locate request through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. When a Cresson start slips more than 14 days past the original notice, we submit a new request before boring. If marks in Cresson are worn or moved, we request refreshed marks through Texas811 before continuing underground work.

What affects the cost of a Cresson directional bore beneath US 377?

The job details determine the price, not one factor alone. Bore length and line size matter, as do Aledo clay or bedrock, marked utilities, pavement, and crossings such as US 377 or Fall Creek. Pits, excavator time, backfill, urgent timing and mobilization from Yukon also affect the scope.

Where the Cresson facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Cresson

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Cresson, Texas

Type the address of your job in Cresson. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Cresson

Counties: Johnson County directional boring · Parker County directional boring. Same county: Pecan Plantation · Oak Trail Shores · Tolar · Canyon Creek · Lipan · Burleson · Cleburne · Joshua · Venus · Alvarado · Keene · Mansfield. All counties: Texas county list.