Guerra Texas Directional Boring: Copita Fine Sandy Loam, FM 649, Weathered Bedrock
Quick Answer: The water provider for a Guerra address must be confirmed before planning, and AEP Texas Central and Medina Electric Cooperative report electric service in Jim Hogg County; line ownership shapes the bore plan. We take directional boring, also called horizontal directional drilling (HDD), work beneath FM 649. Guerra is 672 road miles from our Yukon, Oklahoma main office, and the mapped community has 2.58 public road centerline miles. Copita fine sandy loam covers much of the mapped area, while weathered bedrock is common within five feet, so the route may change from soil to slower drilling.
Guerra bores at a glance
- Unincorporated community in Jim Hogg County, Texas. Population 3 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 672 miles, about 13.8 hours of driving.
- Ground: Copita soil is mapped on 69 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 69 percent of the area.
- Highways inside the boundary: FM 649. State permit office: TxDOT Pharr District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring under FM 649 in Guerra?
The water provider for a Guerra address must be confirmed before a bore is planned, and AEP Texas Central and Medina Electric Cooperative report electric service in Jim Hogg County. That matters before we set a route for water, sewer, gas, electric conduit or fiber along FM 649. The Census Bureau counted 3 people in Guerra in the 2020 Census; it does not publish yearly estimates for this unincorporated place.
Our main office is in Yukon, Oklahoma, and Guerra work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore reached roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. By comparison, a Guerra job is likely to be a shorter service or utility crossing planned around FM 649, Copita soil and weathered bedrock. Our family business started in 1965 and has done directional boring since 1982, and we plan around FM 649 in Guerra.

What kind of ground does Guerra’s Copita soil map show?
The USDA soil survey maps Copita fine sandy loam across 69 percent of Guerra, with Tela sandy clay loam on 21 percent and Brennan fine sandy loam on 8 percent. At the surface, fine sandy loam covers 78 percent of the mapped area and sandy clay loam 21 percent. About 40 inches down, bedrock is mapped across 69 percent, while sandy clay loam accounts for 30 percent. The average clay content at that depth is 23 percent, and sandy ground is mapped across 8 percent. These are mapped soil patterns, not test borings, so a route still needs site checks.
| USDA soil survey, inside the Guerra mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Copita 69 percent, Tela 21 percent and Brennan 8 percent |
| Texture at the surface | fine sandy loam 78 percent and sandy clay loam 21 percent |
| Texture about 40 inches down | bedrock 69 percent and sandy clay loam 30 percent |
| Engineering class about 40 inches down | clayey sand (SC) 30 percent |
| Average clay content about 40 inches down | 23 percent |
| Bedrock mapped within 60 inches | 69 percent of the area (0 percent hard rock, 69 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 21 percent of the area |
| High corrosion risk for uncoated steel | 69 percent of the area |
Weathered bedrock is mapped within 60 inches across 69 percent of Guerra, with a typical depth of 37 inches; hard bedrock is not mapped within that depth. That shallow change can slow a bore and push the head off line where soil meets rock. The USDA soil survey maps no seasonal water table within 60 inches, but flood prone soils cover 21 percent. High steel corrosion risk covers 69 percent, so the line owner should consider casing and tracer wire materials. The mapped Catahoula Formation, Frio Formation, and Vicksburg Formation, undivided, is Rupelian and includes mudstone, claystone, sandstone, tuff and clay.
How do we drill Guerra’s bedrock and sandy soil?
Guerra’s Copita fine sandy loam and shallow weathered bedrock call for a bore plan that follows the ground change. We track the drill head from the surface and log its depth and pitch along the route.
- Copita fine sandy loam covers much of Guerra, so we use drilling fluid to help hold the hole open and stage reaming if the sandy ground loosens behind the bit.
- With weathered bedrock mapped within 60 inches across 69 percent of the community, we slow down for the soil to rock change and check depth and pitch each rod.
- Along a proposed FM 649 route, every marked utility on the bore path is exposed by hydrovac before the drill approaches; paint shows where a line runs, not its depth.
- Where a Guerra bore approaches the 0.79 miles of mapped unnamed drainage, we plan the route to stay beneath the channel and check jurisdiction during planning.

What does a bore have to cross along FM 649 in Guerra?
FM 649 is the only state highway mapped inside Guerra, with 0.7 roadway miles in the community; no other highway is mapped within 1.5 miles outside it. Public road centerlines total 2.58 miles, but the records list no named streets, so the exact route and access point matter when planning a service bore. A crossing beneath FM 649 can avoid cutting the pavement. The route needs to be checked against marked utilities and the highway right of way before the drill path is set.
No railroad is mapped inside Guerra or within one mile outside the community, and no mapped street and rail crossing is recorded. No named stream or lake is mapped in or near the community, though the survey maps 0.79 miles of unnamed drainage within it. A street crossing of a named stream is not mapped. If a proposed route reaches a drainage channel, we check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. A bore can leave FM 649 pavement and drainage banks uncut, with work pits in the ground on each side.
Who approves a bore near FM 649 in Jim Hogg County in Guerra?
Guerra is an unincorporated community, so it has no city government to approve local streets; county or state authority depends on the route. For work in FM 649 right of way, the utility owner, not the driller, submits the utility permit through TxDOT’s online RULIS system. The TxDOT Pharr District reviews it, and we prepare the bore plan and profile for the owner’s application. TxDOT’s cover rules set 60 inches at highway crossings for electric and communication lines and 60 inches for water lines. Pressurized sewer crossings also need 60 inches of cover. TxDOT rules call for boring or tunneling beneath existing highway pavement, with crossings encased and rural highway bores extending beneath all travel lanes. No railroad crossing is mapped in Guerra; a drainage route would be checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines already in the ground in Jim Hogg County in Guerra?
EPA drinking water records do not identify a system that can be matched to a Guerra address. The water provider for the specific address has to be confirmed with the county or local water district before a bore is planned. AEP Texas Central and Medina Electric Cooperative report electric service in Jim Hogg County, but that does not identify the owner at every Guerra address. We confirm the line owner before planning an electric conduit bore, including a route near FM 649.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central and Medina Electric Cooperative | Electric utilities reporting service in Jim Hogg County | EIA Form 861 | Confirm the line owner by address |
Housing data is not published reliably for a place as small as Guerra, so the number and age of buried services cannot be inferred from a housing survey. A small community can still have long service runs along FM 649, and September averages 4.5 inches of precipitation in Jim Hogg County compared with 0.9 inches in February. Before drilling near any marked utility on a proposed FM 649 route, we expose it with hydrovac potholing; surface paint shows position, not depth.

How far is Guerra from Morales-Sanchez and our Yukon yard?
Guerra is an unincorporated community in Jim Hogg County, at an elevation of 562 feet and with 0.21 square miles of mapped land. ZIP code 78360 covers the place. Morales-Sanchez is 15.1 miles southwest, and Lopeño is 17.3 miles southwest. Zapata, the nearest larger city, is 22.6 miles west; Hebbronville, the county seat, is 33.2 miles northeast. The Yukon yard is 672 road miles away, a 13.8 hour drive, so mobilization is part of planning a Guerra bore.
Places near Guerra
- Directional boring in Morales-Sanchez: 15.1 miles southwest
- Directional boring in Lopeño: 17.3 miles southwest
- Directional boring in New Falcon: 20.9 miles southwest
- Directional boring in Falcon Lake Estates: 22.4 miles west
- Directional boring in Siesta Shores: 22.4 miles west
- Directional boring in Zapata: 22.6 miles west
Which jobs call for a bore in Guerra?
- Highway crossing: A bore beneath FM 649 can carry a water or communication line under the pavement instead of cutting across the road.
- Water service: A new service route near FM 649 starts with confirming the address’s water provider and locating the existing line.
- Fiber conduit: A fiber route through Guerra can use a bore beside the public road network, with marked utilities exposed before drilling near them.
- Electric conduit: A proposed conduit route in Jim Hogg County needs the electric line owner confirmed, since county reporting does not identify every Guerra address.
- Drainage crossing: A bore near Guerra’s 0.79 miles of unnamed drainage can pass beneath a channel, subject to jurisdiction checks during planning.
- Service replacement: A replacement line near FM 649 can run below pavement and leave the roadway surface intact while pits sit off the paved route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Guerra bore near FM 649?
Start with a map pin on FM 649 or the exact Guerra access point; a precise location shows whether the route reaches highway right of way or a drainage swale. For a Guerra bore in Copita soils, what will go in the ground, and what pipe or conduit size and footage should we use to plan? A sketch or plans help us see nearby utilities, work space and the proposed bore path before we scope the job.
The Guerra route and ground shape the work. Copita soil over weathered bedrock can affect drilling time, and the 69 percent mapped steel corrosion risk may affect casing or tracer wire choices. Crossings, exposed utilities, pavement, drainage, pits, excavator time and sand backfill also change the scope. FM 649 right of way adds permit planning, while the 672 road miles from Yukon affect mobilization. High profile or emergency work in Guerra can add planning demands when we coordinate permits through the TxDOT Pharr District.
Questions people ask about boring in Guerra
Does Trinity take directional boring work in Guerra, Jim Hogg County, and how is it staffed?
Yes. We take directional boring work in Guerra, with our own crews and partner contractor crews working from satellite yards. For a Guerra request in Jim Hogg County, we stay your contact from first call through the bore log, whichever crew handles the work. For a route near FM 649, we plan the work around the mapped roadway and local ground.
What ground should I expect under Copita soil in Guerra?
The USDA soil survey maps Copita fine sandy loam across 69 percent of Guerra. About 40 inches down, bedrock is mapped over 69 percent of the community and sandy clay loam over 30 percent. Those are mapped patterns, not test borings, so the precise route near FM 649 still needs field checks.
Will a bore in Guerra encounter rock near the surface?
Weathered bedrock is mapped within five feet across 69 percent of Guerra, with typical depth at 37 inches. In Guerra, Brennan soils are mapped, but hard bedrock is not mapped within that depth. A soil to rock transition may slow drilling and affect steering, so we track depth and pitch along the chosen route, including near FM 649.
Who approves a bore under FM 649 in Guerra?
The utility owner files the TxDOT utility permit for work in FM 649 right of way through the online RULIS system. The TxDOT Pharr District reviews the application, and we prepare the bore plan and profile for the owner. TxDOT’s cover and installation requirements apply to the highway crossing.
Who owns electric lines in Guerra, Jim Hogg County, and who confirms conduit specifications?
AEP Texas Central and Medina Electric Cooperative report electric service in Jim Hogg County, but the owner serving a particular Guerra address must be confirmed. The line owner should confirm conduit specifications before a bore is planned. That check matters for a proposed route near FM 649 as well as elsewhere in the community.
Who is responsible for Guerra streets in Jim Hogg County, and must we cut one?
Guerra is unincorporated and has no city government, so street authority rests with the county or the state depending on the road. FM 649 is a state highway, and TxDOT rules call for boring or tunneling beneath existing highway pavement. The mapped community has no named streets in the records.
What bore sizes and lengths can Trinity handle in Guerra, Jim Hogg County?
For Guerra projects in Tela soils, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. For a Guerra route near FM 649, the proposed line size, footage, ground and crossings help determine the approach. A sketch or plans can clarify the route.
How much notice does Texas811 need for a Guerra bore in Jim Hogg County, and what happens to marks?
For a Guerra bore near FM 649, the locate request goes to Texas811 at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If a Guerra start slips more than 14 days past the original notice, we make a new request through the TxDOT Pharr District. When marks for a Guerra bore near Lopeño are worn or moved, we have them refreshed through Texas811 before work continues.
What affects the cost of a directional bore under FM 649 in Guerra?
The route, length, pipe or conduit size, soil and rock, utility crossings, pavement, drainage, pits and equipment time all affect the job scope. In Guerra, Copita soil and shallow weathered bedrock can affect drilling, while FM 649 right of way adds permit planning. For Guerra mobilization, we account for 672 road miles from our Yukon main office when planning equipment transport.
Where the Guerra facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Guerra
- U.S. Census Bureau, TIGER/Line 2024: Guerra boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Guerra population count
- Macrostrat geologic map compilation: map units under Guerra
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Jim Hogg County
- U.S. Geological Survey, Elevation Point Query Service: Guerra elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Guerra
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Guerra
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Guerra, Texas
Type the address of your job in Guerra. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Guerra
Same county: Hebbronville · Las Lomitas · South Fork Estates · Thompsonville. All counties: Texas county list.
