trinityboringsolutions.com

Hawkins Texas Directional Boring: Lilbert Loamy Fine Sand, US 80, Union Pacific

Quick Answer: Along the Union Pacific Mineola Subdivision, we take directional boring and horizontal directional drilling (HDD) work in Hawkins, Texas, for lines that must pass beneath tracks or streets. Beaulah Street, Blackbourn Street and Front Street are among 83 named streets within 30.09 road miles. The Yukon yard is 301 road miles from US 80 in Hawkins. Lilbert loamy fine sand is widespread, so the hole needs support against sloughing.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Hawkins bores at a glance

  • Incorporated city in Wood County, Texas. Population 1,412 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 301 miles, about 6.1 hours of driving.
  • Ground: Lilbert soil is mapped on 37 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 16 percent of the area.
  • Highways inside the boundary: US 80, FM 14 and FM 1795. State permit office: TxDOT Tyler District.
  • Railroad track inside the boundary: Union Pacific, with 3 mapped street and rail crossings.
  • Public water: City of Hawkins, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near Rogers Creek in Hawkins?

Trinity Boring Solutions takes directional boring work in Hawkins, Wood County, including routes near Rogers Creek. Hawkins has a Census Bureau Vintage 2024 population estimate of 1,412, which helps us frame underground work planning without assuming site conditions. Beaulah Street is the longest named street, and the city has 30.09 public road miles, with the Union Pacific Mineola Subdivision also running through it. We install water, sewer, gas, electric conduit and fiber lines beneath Hawkins streets and other route obstacles.

Our main office is in Yukon, Oklahoma, and Hawkins work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, and directional boring has been part of our family business since 1982. In Hawkins, that care matters around the City of Hawkins groundwater system and the electric lines whose owner must be confirmed.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

How does Lilbert soil affect drilling in Hawkins?

Lilbert soil is the leading mapped series in Hawkins, covering 37 percent of the area, and loamy fine sand is the most common surface texture at 44 percent. About 40 inches below the surface, the USDA soil survey maps sandy clay loam across 64 percent of the area and clay across 16 percent. For Hawkins, we treat mapped soil patterns as planning context, not a substitute for test borings along a proposed route. Sand can cave behind the drill head, while clay can cling to the reamer and grip installed pipe, so the drilling fluid and reaming sequence must fit the ground.

USDA soil survey, inside the Hawkins city limitsWhat is mapped
Soil series mappedLilbert 37 percent, Bowie 14 percent, Redsprings 13 percent, Darco 10 percent and Cuthbert 6 percent
Texture at the surfaceloamy fine sand 44 percent, fine sandy loam 24 percent and very gravelly fine sandy loam 10 percent
Texture about 40 inches downsandy clay loam 64 percent, clay 16 percent and fine sand 10 percent
Engineering class about 40 inches downclayey sand (SC) 48 percent, lean clay (CL) 20 percent and fat clay (CH) 16 percent
Average clay content about 40 inches down27 percent
Bedrock mapped within 60 inches16 percent of the area (0 percent hard rock, 16 percent weathered rock)
Seasonal water table within 60 inches18 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel34 percent of the area

The survey maps weathered bedrock within 60 inches in 16 percent of Hawkins, with a typical depth of 44 inches; hard bedrock is not mapped at that depth. The Sparta Sand geologic unit is Eocene age, with sand and clay layers that can change drilling response. A seasonal water table is mapped within 60 inches in 18 percent, so pits may need pumping. Hawkins has no mapped flood prone soils, and we still assess the planned bore route rather than treating maps as site tests. High steel corrosion risk covers 34 percent, so the line owner should consider casing and tracer wire materials.

How do crews handle Hawkins sandy clay loam?

For Hawkins sandy clay loam and Lilbert loamy fine sand, we adjust fluid and reaming to keep the hole stable without forcing excess pressure under pavement. The route and soil survey guide the plan.

  1. In Lilbert loamy fine sand, we use drilling fluid to help hold the bore open, then ream in stages so loose material does not collapse behind the head.
  2. Where Hawkins sandy clay loam or clay is present, we manage fluid returns and reamer buildup, and plan the pipe pull for the same day as the final opening.
  3. Near a Hawkins pavement route such as US 80, we keep fluid pressure controlled so it does not lift the road surface or nearby slabs.
  4. At a proposed route near Rogers Creek, we review the channel and water conditions, keep pits in the dirt, and check whether federal waterway jurisdiction applies.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Which roads, tracks or creeks affect bores in Hawkins near Beaulah Street?

Hawkins bores may cross US 80, FM 14 or FM 1795, all mapped within the city limits. Beaulah Street runs 2.47 miles in Hawkins, while Blackbourn Street and Front Street each extend nearly a mile. The named streets and highways shape entry and exit pit locations, so a route can pass beneath pavement instead of cutting across it. The city has 30.09 public road miles, and no additional highway is mapped within 1.5 miles outside the limits.

CrossingTypeMapped extentWho has a say
US 80US highway1.5 roadway miles insideState highway office
FM 14State highway2.1 roadway miles insideState highway office
FM 1795State highway0.1 roadway miles insideState highway office
Union PacificRailroad1.35 track miles insideThe railroad
Rogers CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Kay CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Sabine RiverStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific owns 1.35 track miles inside Hawkins on its Mineola Subdivision, and three street and rail crossings are mapped in the city. A route beneath the track needs the railroad owner’s crossing agreement. No named stream crosses a city street in the mapped records, but Rogers Creek is 0.2 miles from the limits and Kay Creek and the Sabine River are each 0.5 miles away. The city has 2.22 miles of unnamed drainage, so a route near a channel needs its own site review.

Whose permission does a Hawkins bore under US 80 need?

A Hawkins bore beneath US 80, FM 14 or FM 1795 within state right of way needs a TxDOT utility permit, reviewed by the TxDOT Tyler District. The utility owner files through TxDOT’s RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. Cover depth depends on the line: electric and communication crossings need 60 inches, water crossings need 60 inches, and pressurized sewer crossings need 60 inches below the lowest crossed grade. The permit may set another depth.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines in Hawkins and Wood County?

The City of Hawkins public water system uses groundwater wells and reports 798 service connections serving 1,302 people. Electric service is reported in Wood County by Oncor Electric Delivery Company, Southwestern Electric Power, Farmers Electric Cooperative, Upshur Rural Electric Cooperative and Wood County Electric Cooperative. Those county listings do not identify the provider at every Hawkins address, so we confirm the line owner before planning an electric conduit bore near the city water system.

Line ownerWhat it isSourceSize
City of HawkinsPublic water systemGroundwater wells798 connections, 1,302 people served
Oncor Electric Delivery Company, Southwestern Electric Power, Farmers Electric Cooperative, Upshur Rural Electric Cooperative and Wood County Electric CooperativeElectric utilities reporting service in Wood CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 estimates put Hawkins’s median housing year at 1979; 19 percent of homes predate 1960, and 15 percent were built in 2000 or later. A replacement route near Blackbourn Street may meet older buried service lines, while newer connections can require a different path. We hydrovac pothole every marked utility along the bore route before drilling near it; paint shows position, not depth. That check matters before a proposed crossing beneath Blackbourn Street.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

What is near Hawkins and Big Sandy?

Hawkins is an incorporated city in Wood County, at an elevation of 404 feet and covering 2.21 square miles. For work serving Hawkins in ZIP code 75765, we confirm the actual route and access needs before planning a bore. Big Sandy is 5.3 miles east, Winona is 7.0 miles south, and Holly Lake Ranch is 8.4 miles north. Lindale, the nearest larger city, is 13.7 miles southwest; Quitman, the county seat, is 19.9 miles northwest. The Yukon yard is 301 road miles away, a 6.1 hour drive, which affects mobilization for work on Hawkins roads such as US 80.

Places near Hawkins

What kinds of bores come up near Rogers Creek in Hawkins?

  • Highway crossing: A line beneath US 80 or FM 14 can be bored under the roadway, with the permit and cover plan matched to the utility.
  • Water service: A connection near the City of Hawkins groundwater system can use a bore beneath Front Street to avoid an open cut across pavement.
  • Fiber route: Conduit along Beaulah Street can pass under driveways and sidewalks, with marked utilities exposed before the drill approaches them.
  • Rail crossing: A route beneath the Union Pacific Mineola Subdivision needs coordination with the railroad owner and a crossing agreement.
  • Creek area: A proposed route near Rogers Creek can be planned around channel depth and the review of water crossing jurisdiction.
  • Drainage crossing: Hawkins has 2.22 miles of unnamed drainage, so a route near a drainage swale may need pits placed clear of the channel.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Hawkins bore near Union Pacific?

To quote a Hawkins bore near Union Pacific, we need the address or map pin, what will go underground, pipe or conduit size and footage; a sketch or plans help. For a route near the Mineola Subdivision, include the crossing location and any available alignment details. Those details show whether the work involves track, pavement or a utility corridor.

The 301 road miles from Yukon make mobilization part of a Hawkins job’s scope. Lilbert loamy fine sand and the sandy clay loam mapped below it can affect fluid use and reaming. A route under US 80 or the Union Pacific track adds crossing and permit coordination, while concrete, pavement, utility exposures, creek or drainage crossings, pits and excavator time also shape the work. For Hawkins work, high profile or emergency needs can alter plans, so we account for the 301 road miles from our Yukon, Oklahoma main office.

Questions people ask about boring in Hawkins

Does Trinity take directional boring work in Hawkins and Wood County, and who staffs it?

Yes, we take directional boring work in Hawkins, Wood County, with our own crews and vetted partner contractor crews supporting work from satellite yards. Whatever crew is on site for a Hawkins bore, we stay with you from the first call through the bore log. That arrangement applies to routes near Rogers Creek as well as city streets.

Who controls Front Street in Hawkins, and can a bore avoid cutting it?

Front Street is a city street in incorporated Hawkins, so it belongs to the city rather than Wood County. A directional bore can pass beneath the pavement, with entry and exit pits set off the traveled surface where the route allows. For work involving US 80, TxDOT handles the state highway right of way.

Does Hawkins housing age near Blackbourn Street matter for replacement bores?

It can affect what a replacement route encounters, but housing age does not establish the age or location of buried lines. The American Community Survey 2019 to 2023 puts Hawkins’s median housing year at 1979, with 19 percent of homes built before 1960. We expose marked utilities near a proposed Blackbourn Street route before drilling close to them.

Are groundwater or flood prone soils a problem for bore pits near Rogers Creek in Hawkins?

They can be a site consideration near Rogers Creek, though flood prone soils are not mapped in Hawkins. The survey maps a seasonal water table within 60 inches in 18 percent of the city, which can make pits fill with water. We can plan smaller pits and pumping where field conditions call for it.

Does Lilbert soil in Hawkins corrode steel, and what pipe should I use?

The soil survey maps high steel corrosion risk across 34 percent of Hawkins, so the line owner should consider materials for steel casing and tracer wire. Lilbert loamy fine sand is the leading mapped soil series, but it does not determine pipe selection on its own. The owner chooses the pipe and any protective coating.

What ground does a bore pass through in Hawkins, including Lilbert soil?

Lilbert soil covers 37 percent of Hawkins, and loamy fine sand is mapped across 44 percent. At about 40 inches, sandy clay loam is mapped across 64 percent and clay across 16 percent. Loose sand can cave behind the drill, while clay may cling to the reamer, so mapped patterns help us plan but do not replace site investigation.

How early should I call Texas811 for a Hawkins bore on Beaulah Street?

Count back at least two working days from the planned start on Beaulah Street, excluding Saturdays, Sundays and legal holidays. Texas law allows the request no earlier than 14 days before excavation, and the ticket has a 20 day life. If the start slips beyond that window, make a new request; ask Texas811 to refresh worn or moved marks before work resumes.

How far is Hawkins from the Yukon office, and does Lindale change mobilization?

Our Yukon, Oklahoma main office is 301 road miles and a 6.1 hour drive from Hawkins, so we plan travel into project coordination. Lindale is 13.7 miles southwest of Hawkins, but it does not change the measured distance from Yukon. The trip is one part of job planning, along with the route, Lilbert soil conditions and any crossing of US 80 or Union Pacific track.

What affects the cost of a directional bore in Hawkins near US 80?

The work scope sets the price, not a single local feature. For a Hawkins route near US 80, relevant factors include footage, pipe or conduit size, Lilbert soil and rock conditions, pavement, utility crossings and required exposures. A Union Pacific track crossing, drainage work, pit and excavator needs, emergency timing, and mobilization from Yukon can also change the plan.

Where the Hawkins facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Hawkins

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Hawkins, Texas

Type the address of your job in Hawkins. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Hawkins

Same county: Mineola · Winnsboro · Quitman · Alba · Yantis. All counties: Texas county list.