trinityboringsolutions.com

Holliday Texas Directional Boring: Kamay Silt Loam, US 82 and Holliday Creek

Quick Answer: Along US 82, Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Holliday, Texas, planning routes beneath pavement rather than cutting across it. Our Yukon, Oklahoma main office is 157 road miles away, and Olive Street’s 2.27 miles within town help define likely access. Kamay silt loam covers much of Holliday, while clay deeper down can stick to reamers and grip pipe. That ground calls for staged reaming and a ready pull.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Holliday bores at a glance

  • Incorporated city in Archer County, Texas. Population 1,712 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 157 miles, about 3.1 hours of driving.
  • Ground: Kamay soil is mapped on 43 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 19 percent of the area.
  • Highways inside the boundary: US 82, US 277, FM 368, FM 440 and FM 1954. State permit office: TxDOT Wichita Falls District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Holliday, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near US 82 in Holliday?

Holliday is an incorporated city in Archer County, and the Census Bureau Vintage 2024 estimate puts its population at 1,712. Along Olive Street, College Avenue and US 82, we install water, sewer, gas, electric conduit and fiber lines with a bore route planned around the property and marked utilities. Our work includes service lines and larger conduit runs.

Our main office is in Yukon, Oklahoma, and Holliday work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa; a Holliday job along US 82 is more likely to be a service or utility crossing scaled to its site. We are a family business started in 1965, and we have done directional boring since 1982.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Holliday have around Kamay soil?

The USDA soil survey maps Kamay across 43 percent of Holliday, including Kamay silt loam on slopes from 0 to 1 percent and from 1 to 3 percent. At about 40 inches below the surface, clay is mapped across 77 percent of the city area, with average clay content of 40 percent. Silt loam is the leading surface texture at 56 percent. These are mapped soil patterns, not test borings, so a site check still matters before choosing a drilling fluid and reaming plan.

USDA soil survey, inside the Holliday city limitsWhat is mapped
Soil series mappedKamay 43 percent, Deandale 13 percent, Tillman 12 percent, Jolly 9 percent and Vernon 5 percent
Texture at the surfacesilt loam 56 percent, fine sandy loam 14 percent and clay loam 12 percent
Texture about 40 inches downclay 77 percent, bedrock 14 percent and loam 5 percent
Engineering class about 40 inches downlean clay (CL) 64 percent and fat clay (CH) 21 percent
Average clay content about 40 inches down40 percent
Bedrock mapped within 60 inches19 percent of the area (0 percent hard rock, 19 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel85 percent of the area

The survey maps weathered bedrock within 60 inches across 19 percent of Holliday, with a typical depth of 23 inches; the local Petrolia Formation is Cisuralian and includes shale, sandstone and limestone. Seasonal water table concerns are not mapped, while flood prone soils cover 5 percent. High steel corrosion risk is mapped across 85 percent, so the line owner should consider casing and tracer wire protection. Kamay clay can hold a hole open but may ball on a reamer or grip pipe, making staged reaming and a timely pull useful.

What does it take to bore Holliday’s clay soil?

Kamay silt loam at the surface and clay deeper down call for a controlled fluid plan in Holliday. We expose marked utilities before the drill approaches, then track the head and record its depth and pitch as the bore advances.

  1. Kamay clay can stick to a reamer and tighten around pipe, so we use staged passes and plan the pull while the hole is open.
  2. With clay mapped at about 40 inches down across 77 percent of Holliday, we watch fluid returns and keep pressure controlled beneath paved streets such as College Avenue.
  3. Weathered bedrock is mapped within 60 inches in part of town, so the crew may slow the advance and check steering as the ground changes.
  4. Before a bore near Olive Street, we hydrovac each marked utility on the route, then track the drill head from above and record depth and pitch.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What does a bore have to cross in Holliday near Holliday Creek?

US 82 and US 277 each have 1.2 mapped roadway miles inside Holliday. FM 368 has 2.4 miles, FM 440 has 1.1 miles and FM 1954 has 0.3 miles within the limits; no listed highway lies just outside the city. Olive Street is the longest named street at 2.27 miles, followed by College Avenue at 1.95 miles and West Avenue at 1.51 miles. A bore can keep those paved routes intact, but the roadway and right of way affect its alignment and access.

CrossingTypeMapped extentWho has a say
US 82US highway1.2 roadway miles insideState highway office
US 277US highway1.2 roadway miles insideState highway office
FM 368State highway2.4 roadway miles insideState highway office
FM 440State highway1.1 roadway miles insideState highway office
FM 1954State highway0.3 roadway miles insideState highway office
Holliday CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Panther CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Call Field CanalStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Antelope CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Holliday or within 1 mile outside it, and no street and rail crossings are mapped in the city. No named stream runs inside the limits; Holliday Creek is 0.1 miles from them, with Panther Creek 0.2 miles away. There are 0.55 miles of unnamed drainage mapped in town, and no street crossings of named streams are mapped. A planned creek or drainage route needs site review, and no lakes or ponds are mapped within 1 mile.

Who approves a bore on Holliday roads in Archer County?

Holliday’s city streets, including Olive Street and College Avenue, belong to the city because Holliday is incorporated. For work in the right of way of US 82, US 277 or an FM road, TxDOT’s Wichita Falls District reviews the utility permit. The line owner, not the drilling contractor, files through TxDOT’s RULIS system; we prepare the bore plan and profile for that filing. TxDOT rules call for 60 inches of cover below the lowest crossed grade for electric and communication lines, and 60 inches for water crossings; the permit may set a different depth. Holliday Creek is close to the city limits, so a planned water crossing is checked for federal waterway jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near City of Holliday lines?

The City of Holliday public water system uses purchased surface water and serves 2,724 people through 908 service connections. For electric conduit near US 82 or Olive Street, the county service list includes AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power and Tri-County Electric Cooperative. Those providers report service in Archer County; the specific line owner must be identified before conduit work is planned.

Line ownerWhat it isSourceSize
City of HollidayPublic water systemSurface water bought from another system908 connections, 2,724 people served
AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power and Tri-County Electric CooperativeElectric utilities reporting service in Archer CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Holliday’s median housing year at 1978, with 31 percent of homes built before 1960 and 18 percent built in 2000 or later. A replacement bore along College Avenue may follow older buried service, while a newer connection can need a different route. We hydrovac pothole marked utilities before drilling near them, since locate paint gives position but not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

What is near Holliday, including Iowa Park?

Holliday covers 2.5 square miles in Archer County at an elevation of 1,054 feet, with ZIP codes 76366 and 76310. Lakeside City is 8.6 miles east, Pleasant Valley is 10.0 miles northeast, Iowa Park is 10.3 miles north and Wichita Falls is 11.4 miles northeast. Iowa Park is the nearest larger city; Archer City, the county seat, is 15.7 miles south. The Yukon yard is 157 road miles away, a 3.1 hour drive, which can affect mobilization for a Holliday project.

Places near Holliday

What kinds of bores come up along Holliday’s Olive Street?

  • Highway crossing: A route under US 82 can leave pavement intact, with the line owner arranging the TxDOT right of way permit.
  • Water service: A connection near the City of Holliday system needs a route planned around existing water lines and the service connection.
  • Fiber conduit: A run along Olive Street can use a bore to avoid opening its paved surface, after marked utilities are exposed.
  • Creek crossing: A planned route near Holliday Creek needs channel depth and waterway jurisdiction considered before the bore path is set.
  • Street replacement: A sewer or water replacement along College Avenue can pass below the street instead of cutting the roadway.
  • Drainage crossing: A route through the city’s mapped unnamed drainage needs a site specific path and access plan.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Holliday’s Ray Road?

For a Holliday quote, give us the address or map pin, what is going underground, the pipe or conduit size and the footage; a sketch or plans help place the route against Ray Road or US 82. If the route approaches the 0.55 miles of mapped unnamed drainage, that detail helps us understand the crossing and access needs before we scope the work.

The 157 road miles from Yukon affect mobilization for a Holliday job. Kamay clay and the mapped weathered bedrock can change drilling time, while a route near US 82 may involve pavement and right of way constraints. We also consider bore length, pipe size, utilities to expose, creek or drainage crossings, pits, excavator time and sand backfill. Emergency or high profile work can call for a different scope.

Questions people ask about boring in Holliday

Does Trinity take directional boring work in Holliday and Archer County?

Yes. We take directional boring work in Holliday and Archer County, with our own crews and partner drilling contractors we have vetted supporting the work. The customer works with Trinity from the first call through the bore log, whether the job is near US 82 or on a residential street.

Who owns electric lines in Holliday, Archer County, and who confirms conduit specs?

AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power and Tri-County Electric Cooperative report service in Archer County, but the records do not identify one provider for every Holliday address. The electric line owner should be confirmed before a conduit bore near Olive Street, and that owner can confirm the line requirements.

Are Holliday streets such as West Avenue city streets, and do they have to be cut?

West Avenue is within incorporated Holliday, so it is a city street. A directional bore can pass below pavement without cutting across the street, with pits placed in the dirt on either side where access allows. The exact route depends on utilities and site conditions.

How old are buried lines near Holliday’s College Avenue, and can replacement lines be bored?

The American Community Survey 2019 to 2023 estimates give Holliday a median housing year of 1978, with 31 percent of homes built before 1960. That makes older service lines a possible replacement concern near College Avenue. Potholing marked utilities helps establish their depth before a replacement bore approaches.

Does Kamay soil in Holliday corrode steel, and what pipe should be used?

The USDA soil survey maps high steel corrosion risk across 85 percent of Holliday. The line owner selects coatings or other protection for steel casing and tracer wire; the appropriate pipe depends on the project design. Kamay silt loam is common in town, but a site review still matters.

What ground will a bore pass through in Holliday’s Kamay soil?

The USDA soil survey maps Kamay across 43 percent of Holliday, with clay making up 77 percent of the mapped texture at about 40 inches below the surface. That clay can stick to the reamer and grip pipe. Staged reaming and a controlled fluid plan help manage the hole.

How far is Holliday from the Yukon office, and does Iowa Park affect the job?

Holliday is 157 road miles and a 3.1 hour drive from Trinity’s Yukon, Oklahoma main office. Iowa Park is 10.3 miles north of Holliday, but it does not change the route distance from Yukon. Mobilization is one part of the scope, along with ground, access and crossings.

How much notice does Texas811 need for a Holliday bore near Olive Street?

For work near Olive Street, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the original notice, make a new request. Have worn or moved marks refreshed before work continues.

What affects the cost of directional boring in Holliday near US 82?

The job scope sets the price, including length, pipe size, Kamay clay, utilities to expose, pavement and drainage crossings. Work near US 82 may need a highway right of way permit, and Holliday’s 157 road miles from Yukon affect mobilization. Pit work, excavator time, backfill and emergency timing can also change the scope.

Where the Holliday facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Holliday

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Holliday, Texas

Type the address of your job in Holliday. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Holliday

Same county: Scotland · Windthorst · Megargel. All counties: Texas county list.