trinityboringsolutions.com

Ivanhoe Texas Directional Boring: Doucette Loamy Sand, US 287 and Magnus Branch

Quick Answer: Can you get a line under US 287, Sherwood Forest Drive or Magnus Branch without cutting the surface? Yes, we plan directional boring, also called horizontal directional drilling (HDD), around those Ivanhoe features. From our Yukon, Oklahoma main office, Ivanhoe is 447 road miles away, with US 69 also inside the city. Doucette loamy sand is common near the surface, so the bore plan must account for ground that can loosen behind the drill. Magnus Branch and the city’s lakes also make the route matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Ivanhoe bores at a glance

  • Incorporated city in Tyler County, Texas. Population 1,392 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 447 miles, about 9.1 hours of driving.
  • Ground: Doucette soil is mapped on 22 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 16 percent of the area.
  • Highways inside the boundary: US 287 and US 69. State permit office: TxDOT Beaumont District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Magnus Branch and Big Turkey Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near US 287 in Ivanhoe?

Trinity Boring Solutions takes directional boring work in Ivanhoe, Tyler County, for routes such as US 287 and Sherwood Forest Drive. The Census Bureau Vintage 2024 estimate puts the city population at 1,392. We install water, sewer, gas, electric conduit and fiber along local streets or beneath roads where the route and access allow a bore.

Our main office is in Yukon, Oklahoma, and Ivanhoe work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We handle work from 3/4 inch service lines to 48 inch casing, including small services near Ivanhoe Drive and larger casing where the route calls for it. Our family business started in 1965, and we have done directional boring since 1982, with Ivanhoe 447 road miles from our Yukon main office.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does a bore meet in Ivanhoe near Doucette soil?

Ivanhoe’s mapped ground includes Doucette loamy sand and deeper sandy clay loam, so the bore may change behavior with depth. The USDA soil survey maps Doucette soil across 22% of the city and loamy sand across 46% of the surface. At about 40 inches below ground, sandy clay loam covers 66% of the mapped area; sandy clay and clay rich soil groups also appear in the survey. In Ivanhoe, our mapped soil patterns include Doucette, Pinetucky, Shankler, and Stringtown, but they are not test borings. Loose sandy layers can fall in behind the bit, while clay can cling to the reamer.

USDA soil survey, inside the Ivanhoe city limitsWhat is mapped
Soil series mappedDoucette 22 percent, Pinetucky 15 percent, Shankler 14 percent, Stringtown 12 percent and Otanya 7 percent
Texture at the surfaceloamy sand 46 percent, fine sandy loam 33 percent and very fine sandy loam 7 percent
Texture about 40 inches downsandy clay loam 66 percent, loamy sand 14 percent and loam 5 percent
Engineering class about 40 inches downclayey sand (SC) 37 percent, lean clay (CL) 29 percent and silty sand (SM) 19 percent
Average clay content about 40 inches down23 percent
Bedrock mapped within 60 inches16 percent of the area (0 percent hard rock, 16 percent weathered rock)
Seasonal water table within 60 inches16 percent of the area
Flood prone soils4 percent of the area
High corrosion risk for uncoated steel23 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches across 16% of Ivanhoe, but no hard bedrock is mapped at that depth. Seasonal water table is mapped within 60 inches across 16%, and flood prone soils cover 4%, so Magnus Branch routes call for attention to wet pits and channel depth. High steel corrosion risk covers 23%, a factor for the line owner to weigh for casing or tracer wire. The Pliocene Willis Formation includes clay, silt, sand and gravel, so conditions can vary along a bore.

How do crews bore Ivanhoe’s sandy clay loam?

We plan an Ivanhoe bore for changing layers, from Doucette loamy sand to sandy clay loam at about 40 inches. That mix affects how we hold the hole open and keep the drill on line.

  1. In Doucette loamy sand, we use drilling fluid to support loose ground, then ream in stages so the opening is less likely to collapse before pipe is ready.
  2. Where Ivanhoe’s sandy clay loam holds around the reamer, we adjust fluid and reaming rather than forcing the pipe through a tight hole.
  3. At Magnus Branch or a low, wet spot, we plan pits with the seasonal water table in mind and check the proposed creek route during planning.
  4. Along a route near US 287, we pothole marked utilities before drilling close, track the head from the surface and log depth and pitch.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What might an Ivanhoe bore cross near Sherwood Forest Drive?

US 287 and US 69 each have 0.3 mapped roadway miles inside Ivanhoe, so a route beneath either highway needs its own depth and access plan. Sherwood Forest Drive is the longest named street in the city at 2.29 miles, followed by Ivanhoe Drive at 2.26 miles and Sir Henry Drive at 2.11 miles. A bore can pass below pavement rather than cut across it, subject to the route and required approvals.

CrossingTypeMapped extentWho has a say
US 287US highway0.3 roadway miles insideState highway office
US 69US highway0.3 roadway miles insideState highway office
Magnus BranchStream0.12 channel miles insideChecked for Corps of Engineers jurisdiction
Big Turkey CreekStream0.07 channel miles insideChecked for Corps of Engineers jurisdiction
Big Cypress CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Spurlock BranchStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Lake CharmaineLake or pond160 acres, insideChecked for Corps of Engineers jurisdiction
Lake GalahadLake or pond69 acres, insideChecked for Corps of Engineers jurisdiction
Lake TristanLake or pond40 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Ivanhoe or within one mile outside its limits, and no street and rail crossings are mapped in the city. Magnus Branch runs 0.12 channel miles inside the limits, while Big Turkey Creek runs 0.07 channel miles; no mapped city streets cross named streams. Lake Charmaine, Lake Galahad and Lake Tristan are also inside the city, so a route near a water feature needs site specific review.

Who approves an Ivanhoe bore in Tyler County?

Ivanhoe’s city streets are under the city’s authority, while work in the right of way of US 287 or US 69 needs a TxDOT utility permit reviewed by the Beaumont District. For an electric or communication line crossing either highway, the stated cover is at least 60 inches below the lowest crossed grade; water lines also need 60 inches at crossings, and pressurized sewer lines need 60 inches. The utility owner files through TxDOT’s RULIS system, with our bore plan and profile supporting its application. Existing highway pavement is bored or tunneled rather than open cut. A Magnus Branch crossing is checked for federal waterway jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities should Ivanhoe crews check in Tyler County?

The water provider for a specific Ivanhoe address has to be confirmed with the city, Tyler County or the local water district before a bore is planned; available EPA records do not match a named system to the city. Entergy Texas and Sam Houston Electric Cooperative report electric service in Tyler County, but that does not identify the provider at every address. We confirm the line owner before planning a conduit bore near US 287 or a local street.

Line ownerWhat it isSourceSize
Entergy Texas and Sam Houston Electric CooperativeElectric utilities reporting service in Tyler CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Ivanhoe’s median housing year at 1985; 4% of housing was built before 1960, 65% from 1960 to 1999 and 31% in 2000 or later. That mix can mean both replacement lines and new services along streets such as Charmaine Drive. Before drilling near a marked utility, we use hydrovac potholing to expose it; paint shows position, not depth. For a proposed water line, we also confirm the address provider before planning the bore.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

What is near Ivanhoe and Woodville for a bore job?

Ivanhoe is an incorporated city in Tyler County, at an elevation of 187 feet and covering 3.18 square miles. ZIP code 75979 serves Ivanhoe, and we plan underground routes with Tyler County roads and local access in mind. Warren is 4.7 miles south, Woodville is 6.6 miles north, and Wildwood is 10.9 miles south; Woodville is also the county seat. Silsbee, the nearest larger city, is 27.1 miles southeast. From our Yukon, Oklahoma main office, the road trip is 447 miles and about 9.1 hours, which affects crew mobilization for work near US 287 or Magnus Branch.

Places near Ivanhoe

What would we bore near Magnus Branch in Ivanhoe?

  • Highway crossing: A route beneath US 287 or US 69 needs a bore plan that accounts for the highway right of way and required cover.
  • Street service: A water or sewer line near Sir Henry Drive can pass beneath pavement where the route and access suit a bore.
  • Fiber conduit: A run along Sherwood Forest Drive can connect service without opening the full street surface.
  • Creek crossing: A proposed line near Magnus Branch needs a route planned around the channel and a jurisdiction check.
  • Lake route: A bore near Lake Charmaine needs site specific planning for access, pits and the water feature.
  • Utility conduit: Before a conduit route near Charmaine Drive, we confirm the electric line owner and expose marked utilities on the path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send to quote a bore near Charmaine Drive in Ivanhoe?

Send a map pin or address first, because a spot near Charmaine Drive may have different access or crossings than one near US 287. Include what will go underground, the pipe or conduit size and the footage. A sketch or plans help us see the route, pits and nearby features such as Magnus Branch.

The 447 road miles from Yukon make mobilization part of planning for an Ivanhoe job, while the 9.1 hour drive gives context for crew scheduling. Doucette loamy sand and deeper sandy clay loam affect drilling and reaming. A crossing at US 287, nearby utilities to expose, pavement, pits, excavator time and sand backfill also shape the work. Creek or drainage crossings, emergency timing and the route length matter too.

Questions people ask about boring in Ivanhoe

Does Trinity take directional boring jobs in Ivanhoe, Tyler County, and who staffs them?

Yes, we take directional boring work in Ivanhoe, Tyler County, and keep Trinity responsible from the first call through the bore log. Our own crews and satellite yards operated by drilling contractors we have vetted can support the work. The crew arrangement does not change who you contact about a route near US 287.

Does Ivanhoe control Sir Henry Drive, and does a bore mean cutting the street?

Ivanhoe is incorporated, so Sir Henry Drive is a city street. A directional bore can place a line beneath the pavement without cutting through the street, if the route, access and approvals allow it. The mapped street length is 2.11 miles, so the exact crossing point matters to the work plan.

What do Ivanhoe Drive’s housing ages suggest about replacement bores?

Ivanhoe’s housing data show a mix of ages, so a project may replace an older line or add a service to a newer property. The American Community Survey 2019 to 2023 estimates give a median housing year of 1985. For a route by Ivanhoe Drive, we expose marked utilities before drilling near them because locate paint does not show depth.

Could groundwater or flood prone soil affect bore pits near Magnus Branch in Ivanhoe?

Yes, wet ground can affect pit planning near Magnus Branch. The USDA soil survey maps seasonal water table within 60 inches across 16% of Ivanhoe and flood prone soils across 4%. We account for wet pits and plan a creek crossing to stay below the channel where the route requires one.

What is Ivanhoe Doucette soil like for a bore?

Doucette loamy sand is a major mapped surface soil in Ivanhoe, and loose sand can cave behind the drill. At about 40 inches below the surface, the USDA soil survey maps sandy clay loam across 66% of the city. These are mapped patterns, not jobsite test borings, so the actual route still needs assessment.

Will an Ivanhoe bore encounter rock in the top five feet?

Weathered bedrock is mapped within 60 inches across 16% of Ivanhoe, while hard bedrock is not mapped within that depth. The mapped unit includes the Pliocene Willis Formation. A bore may need slower progress where weathered material is present, but the soil survey does not establish conditions at a specific address.

How far is Ivanhoe from Yukon, and does Silsbee affect a bore job?

Ivanhoe is 447 road miles and about 9.1 hours from our Yukon, Oklahoma main office. Silsbee is 27.1 miles southeast of Ivanhoe, but that does not change the route specific work. For a job near US 69, distance from Yukon is one factor in mobilization and scheduling.

How much notice does a bore near Sherwood Forest Drive in Ivanhoe need?

For a bore near Sherwood Forest Drive, Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For Sherwood Forest Drive in Ivanhoe, if the start moves more than 14 days past the original notice, we make a new request. If marks near Big Turkey Creek are worn or moved, we refresh them through Texas811 before continuing boring in Ivanhoe.

How might Doucette soils affect costs for a directional bore under US 287 in Ivanhoe?

The route and job details set the price for a US 287 bore in Ivanhoe. Mobilization from Yukon, bore length, pipe or conduit size, Doucette soil conditions, pavement and the utilities that need exposure all matter. A Magnus Branch or drainage crossing, pits, excavator time and emergency scheduling can also change the scope.

Where the Ivanhoe facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Ivanhoe

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Ivanhoe, Texas

Type the address of your job in Ivanhoe. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Ivanhoe

Same county: Chester. All counties: Texas county list.