trinityboringsolutions.com

Kemah Texas Directional Boring: Mocarey Soil, FM 518 and Clear Creek

Quick Answer: Clay in the Beaumont Formation is a ground factor in Kemah, Texas, where we use directional boring, also called horizontal directional drilling (HDD), to place lines beneath FM 518 without opening its pavement. Clear Creek also calls for route planning. Kemah is 489 road miles from our Yukon, Oklahoma main office, and Kipp Avenue is one of its longest streets. Mocarey is the leading mapped soil series at 50 percent; clay can cling to a reamer and grip pipe, so staged passes matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Kemah bores at a glance

  • Incorporated city in Galveston County, Texas. Population 2,853 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 489 miles, about 9.6 hours of driving.
  • Ground: Mocarey soil is mapped on 50 percent of the area, with loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 518, Texas State Highway 146, FM 2094 and Texas State Highway 96. State permit office: TxDOT Houston District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Clear Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Clear Creek in Kemah?

Mocarey clay and loam can make a bore sticky, so route and fluid control matter in Kemah. The Census Bureau Vintage 2024 estimate puts the city population at 2,853. We install water, sewer, gas, electric conduit and fiber along routes such as Kipp Avenue or beneath FM 518, with the alignment set for the job.

Our main office is in Yukon, Oklahoma, and Kemah work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, a record that matters when planning around electric service reported in Galveston County by CenterPoint Energy, Entergy Texas and Texas-New Mexico Power. Our family business began in 1965, and we have done directional boring since 1982; a Clear Creek crossing calls for site specific planning.

Ditch Witch directional drill rig with a loaded drill rod rack staged at a commercial jobsite
Our Ditch Witch directional drill with a full rack of drill rod staged at a commercial site. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Mocarey soil create for Kemah bores?

The USDA soil survey maps Mocarey as 50 percent of Kemah’s soil series. Its map units include a Mocarey rarely flooded and Leton occasionally flooded complex, as well as Mocarey and Algoa loams. At about 40 inches below the surface, loam is mapped across 50 percent of the area, while clay accounts for 29 percent and average clay content is 30 percent. Our mapped Mocarey, Verland, Bernard, and Morey soil patterns are planning references in Kemah, not test borings. Clay can cling to a reamer, so a field check helps shape the fluid and reaming plan.

USDA soil survey, inside the Kemah city limitsWhat is mapped
Soil series mappedMocarey 50 percent, Verland 16 percent, Bernard 12 percent, Morey 8 percent and Kemah 6 percent
Texture at the surfaceloam 53 percent, silty clay loam 16 percent and silt loam 14 percent
Texture about 40 inches downloam 50 percent, clay 29 percent and clay loam 10 percent
Engineering class about 40 inches downlean clay (CL) 67 percent and fat clay (CH) 29 percent
Average clay content about 40 inches down30 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches96 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel94 percent of the area

Bedrock is not mapped in the top five feet of Kemah, which does not rule out deeper rock. The USDA survey maps a seasonal water table within 60 inches across 96 percent of the area, so entry pits may need pumping. Flood prone soils cover 3 percent. High steel corrosion risk is mapped across 94 percent, making casing and tracer wire materials a line owner decision; HDPE is not subject to that soil corrosion concern. The Beaumont Formation, of Pleistocene age, is described as predominantly clay, which supports planning for sticky ground.

What does it take to bore Kemah loam and clay?

Kemah’s mapped loam and clay call for a plan that controls fluid and keeps the hole stable. We check the route, expose marked lines and track the drill head as the bore advances.

  1. Clay mapped around Mocarey soil can ball on a reamer and grip pipe, so we use thinner fluid, ream in stages and plan the pull promptly.
  2. With a seasonal water table mapped within 60 inches across 96 percent of Kemah, we keep pits small and pump them if water collects.
  3. Before drilling toward FM 518 or Kipp Avenue, we hydrovac expose each marked utility on the route; paint locates position, not depth.
  4. We track the drill head from the surface and log depth and pitch, adjusting the route for Kemah’s loam and clay conditions.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What does a bore have to cross near Kipp Avenue in Kemah?

FM 518 runs 2.3 mapped roadway miles within Kemah, and Texas State Highway 146 adds 2.2 miles. FM 2094 and Texas State Highway 96 also pass through the city. Kipp Avenue is the longest named street at 1.0 mile, followed by Anders Lane at 0.9 mile and Kemah Drive at 0.66 mile. These routes may shape access and bore alignment. Boring can leave pavement and sidewalks uncut, with work pits placed in dirt on either side.

CrossingTypeMapped extentWho has a say
FM 518State highway2.3 roadway miles insideState highway office
Texas State Highway 146State highway2.2 roadway miles insideState highway office
FM 2094State highway0.4 roadway miles insideState highway office
Texas State Highway 96State highway0.1 roadway miles insideState highway office
Clear CreekStream0.03 channel miles insideChecked for Corps of Engineers jurisdiction
Jarbo BayouStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Clear LakeLake or pond772 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Kemah or within 1 mile outside its limits, so a mapped rail crossing is not part of the route picture. Clear Creek runs 0.03 channel miles in the city, with no mapped street crossing of a named stream. Clear Lake is outside the city limits but lies within 1 mile and covers 772 acres. A planned bore near Clear Creek or Clear Lake needs a route review for water crossing conditions.

Who approves a bore under FM 518 in Kemah?

At FM 518 and Texas State Highway 146, TxDOT’s cover requirements help set bore depth: electric and communication lines need 60 inches at a highway crossing, while water needs 60 inches and pressurized sewer needs 60 inches. The TxDOT Houston District reviews a utility permit for work in state highway right of way. The utility owner files through RULIS; we prepare the bore plan and profile for its application and work under its permit. We treat Kipp Avenue as a city street in Kemah, so street work there follows city rather than county ownership. Clear Creek crossings are checked for federal waterway jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns lines in Galveston County near Kemah?

The water provider for a specific Kemah address has to be confirmed with the city, the county or the local water district before a bore is planned. Electric service reported in Galveston County includes CenterPoint Energy, Entergy Texas and Texas-New Mexico Power; that does not identify the provider at every Kemah address. Before an electric conduit bore near Kemah Drive, we confirm the line owner and pothole marked utilities, including water and electric lines, before drilling near them.

Line ownerWhat it isSourceSize
CenterPoint Energy, Entergy Texas and Texas-New Mexico PowerElectric utilities reporting service in Galveston CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates place Kemah’s median housing year at 1995; we still plan underground work around site conditions. Seven percent of housing units were built before 1960, 56 percent from 1960 to 1999 and 37 percent in 2000 or later. That mix can mean a replacement route past Anders Lane as well as new service work. Locate marks show position, not depth, so marked lines on the bore path need to be exposed before drilling near them.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Do you cover Kemah and nearby Bacliff?

Kemah is an incorporated city in Galveston County, with an elevation of 20 feet and a land area of 1.83 square miles. ZIP code 77565 covers the city. Clear Lake Shores is 1.3 miles northwest, while Bacliff is 2.3 miles southeast. Galveston, the county seat, is 23.9 miles south. From our Yukon, Oklahoma main office, Kemah is 489 road miles away, a 9.6 hour drive. Those distances are part of planning mobilization for work around FM 518 and the city’s streets.

Places near Kemah

What boring work comes up near Anders Lane in Kemah?

  • Highway crossing: A bore beneath FM 518 can keep a new water line or conduit out of the pavement, subject to the utility owner’s permit.
  • Street service: A route near Kemah Drive can carry water, sewer or conduit while leaving the street surface uncut.
  • Fiber route: Fiber conduit along Anders Lane needs a planned path around marked utilities and the mapped clay ground.
  • Creek crossing: A line routed near Clear Creek needs a profile that stays below the channel and a jurisdiction check during planning.
  • Electric conduit: Near Kipp Avenue, we expose marked lines before drilling and verify which Galveston County reported electric provider owns the line.
  • Water replacement: A service route near 4th Street can be bored between dirt pits instead of open cutting the sidewalk or pavement.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for directional boring near 4th Street in Kemah?

A map pin matters near 4th Street because the exact entry and exit points can change the route around pavement, marked utilities or Clear Creek. Send the Kemah address or pin, what will go underground, pipe or conduit size and footage. A sketch or plans help us check access and crossings before we set the bore scope.

A short route that avoids FM 518 pavement and Clear Creek is simpler to plan. Clay in the Mocarey mapped area, bore length, pipe size and the number of exposed utility crossings can add work. Concrete, entry pits, excavator time and sand backfill also shape the job. A route that needs a highway permit or creek review takes more planning, and Kemah’s 489 road miles from Yukon affect mobilization.

Questions people ask about boring in Kemah

Does Trinity take directional boring work in Kemah and Galveston County?

Yes. Kemah is 489 road miles from our Yukon main office, and we take directional boring work there and across Texas. Our main office is in Yukon, and Kemah projects use our own crews or crews from satellite yards operated by drilling partners we have vetted. You work with Trinity through the bore log, whether the crew is working near Kipp Avenue or elsewhere in Galveston County.

Who approves a bore under FM 518 in Kemah?

TxDOT reviews utility work in FM 518 right of way through its Houston District. The utility owner submits the permit application through RULIS, while we prepare the bore plan and profile for that filing. The permit and required cover depth shape the route beneath FM 518.

Can you bore a line under Clear Creek in Kemah?

A bore under Clear Creek can be considered after reviewing the route, depth and ground conditions. The creek has 0.03 channel miles mapped inside Kemah, and water crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. A site plan helps locate pits away from the channel.

Which electric company owns lines at a Kemah address in Galveston County?

The specific line owner needs to be confirmed for the address before a conduit bore is planned. CenterPoint Energy, Entergy Texas and Texas-New Mexico Power report electric service in Galveston County, but that does not establish who serves every Kemah property. We can plan the conduit after the owner and its specifications are confirmed.

Who is responsible for Kemah Drive in Kemah, and does it need to be cut?

Kemah is an incorporated city in Galveston County, so we treat Park Avenue street work as city jurisdiction, not county jurisdiction. A bore near Kemah Drive can pass below the street with entry and exit pits in dirt, avoiding an open cut through the pavement when the route and conditions allow.

Do older buried lines near Anders Lane in Kemah affect replacement bores?

They can affect the route and the number of lines to expose. The American Community Survey 2019 to 2023 estimates put Kemah’s median housing year at 1995, with 7 percent of housing units built before 1960. Near Anders Lane, marked utilities must be exposed before drilling close to them.

What bore sizes and lengths can you handle for a Kemah job near 4th Street?

We handle 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. For a 4th Street job in Kemah, the route, soil and crossings help determine which equipment and bore plan fit.

How much notice does Texas811 need for a Kemah bore near Kipp Avenue?

Count back at least two working days from the planned start, excluding Saturdays, Sundays and legal holidays; the request cannot be made more than 14 days ahead. A ticket covers a 20 day window. If the start slips more than 14 days past the original notice, request a new ticket; refresh worn or moved marks through Texas811 before work resumes near Kipp Avenue.

Near FM 518 in Kemah, how do we account for local soil series and crossing conditions when pricing directional boring?

The route and work scope drive the price. A short, direct run near FM 518 is simpler than one requiring highway coordination, pavement work or multiple exposed utilities. Bore length, pipe size, Mocarey clay, pits, excavator time, backfill, creek crossings and mobilization from Yukon also affect the job.

Where the Kemah facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Kemah

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Kemah, Texas

Type the address of your job in Kemah. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Kemah

Same county: League City · Texas City · Galveston · Friendswood · Dickinson · La Marque · Santa Fe · Hitchcock · San Leon · Bolivar Peninsula · Bayou Vista · Tiki Island. All counties: Texas county list.