trinityboringsolutions.com

Dickinson Texas Directional Boring: Vamont Clay, Union Pacific, Bordens Gully

Quick Answer: Dickinson is an incorporated city in Galveston County, so the city owns its streets; Trinity handles directional boring, also called horizontal directional drilling (HDD), for routes near FM 517 and other crossings. Our Yukon, Oklahoma main office is 488 road miles away, with Interstate 45 among the local route constraints. Vamont clay is common here, and sticky cuttings can load a reamer and grip pipe. We plan fluid and staged reaming around that ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Dickinson bores at a glance

  • Incorporated city in Galveston County, Texas. Population 21,941 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 488 miles, about 9.5 hours of driving.
  • Ground: Vamont soil is mapped on 29 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 45, US 75, FM 517, FM 646 and Texas State Highway 3. State permit office: TxDOT Houston District.
  • Railroad track inside the boundary: Union Pacific, with 6 mapped street and rail crossings.
  • Named streams inside the boundary: Bordens Gully, Benson Bayou and Geisler Gully.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring by Union Pacific in Dickinson?

Dickinson is an incorporated city in Galveston County, and the city owns its streets. We use the Census Bureau Vintage 2024 estimate of 21,941 to frame underground planning in Dickinson. We install water, sewer, gas, electric conduit and fiber lines, including routes beneath streets such as Hughes Road or near the Union Pacific track. Each route depends on the line location and the crossings along its path.

Our main office is in Yukon, Oklahoma, and Dickinson work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our record is no utility strike in over 25 years, a concern on routes near Union Pacific track and electric lines whose owner must be confirmed in Galveston County. Trinity is a family business started in 1965, and we have done directional boring since 1982.

Aerial view of Trinity Boring Solutions crew and service van at a multifamily apartment underground utility jobsite in Oklahoma City
Our crew and service van at a multifamily underground utility job in Oklahoma City, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

How does Vamont soil affect drilling in Dickinson?

The USDA soil survey maps Vamont soil across 29 percent of Dickinson and Lake Charles soil across 21 percent. Clay is the surface texture across 60 percent of the mapped area. At about 40 inches below the surface, clay is mapped across 89 percent, with an average clay content of 51 percent at that depth. We treat Dickinson’s mapped soil patterns as a guide, not test borings, when planning a bore and confirming ground conditions. The clay can stick to a reamer and swell around pipe, so we plan staged reaming and fluid for the route rather than treating the ground as free flowing.

USDA soil survey, inside the Dickinson city limitsWhat is mapped
Soil series mappedVamont 29 percent, Lake Charles 21 percent, Bernard 17 percent, Verland 11 percent and Bacliff 10 percent
Texture at the surfaceclay 60 percent, clay loam 17 percent and silty clay loam 11 percent
Texture about 40 inches downclay 89 percent and loam 6 percent
Engineering class about 40 inches downfat clay (CH) 89 percent and lean clay (CL) 6 percent
Average clay content about 40 inches down51 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches75 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel96 percent of the area

The soil survey maps a seasonal water table within 40 inches in 75 percent of Dickinson, so pits may need pumping and a compact layout. Flood prone soils account for 1 percent of the mapped area; near Bordens Gully, the channel still needs its own crossing review. High steel corrosion risk is mapped across 96 percent, which makes casing and tracer wire material a line owner decision. Bedrock is not mapped in the upper five feet. The geologic map names the Beaumont Formation, areas predominantly clay, of Pleistocene age, so clay conditions deserve attention even where deeper conditions are not established by the map.

How is a bore run through Dickinson clay?

Dickinson’s clay can cling to the reamer and grip pipe. Near Vamont and Lake Charles soils, we match the fluid, hole size and pullback timing to the ground and the crossing.

  1. We use a thinner drilling fluid and polymer in Vamont clay, then open the hole in stages so sticky cuttings do not overload the reamer.
  2. With seasonal water tables mapped within 40 inches across much of Dickinson, we keep pits compact and pump water when the ground fills them.
  3. Before approaching a marked line near Hughes Road, we expose it with hydrovac; locate paint shows the route, not its depth.
  4. At Bordens Gully, we track the drill head from the surface, log depth and pitch, and plan the path beneath the channel without cutting the bank.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Where might a line pass under Bordens Gully in Dickinson?

Interstate 45 and US 75 each have 0.8 mapped roadway miles inside Dickinson; FM 517 runs 16.0 miles, with FM 646, Texas State Highway 3 and FM 1266 also inside the limits. Texas State Highway 96 is 1.2 miles outside the city. For a Dickinson highway crossing, we follow TxDOT rules and bore or tunnel beneath existing pavement. Hughes Road, Deats Road and East Avenue are among the longest named streets, so a route can involve city street access as well as a state highway crossing.

CrossingTypeMapped extentWho has a say
Interstate 45Interstate0.8 roadway miles insideState highway office
US 75US highway0.8 roadway miles insideState highway office
FM 517State highway16 roadway miles insideState highway office
FM 646State highway2.9 roadway miles insideState highway office
Texas State Highway 3State highway2.6 roadway miles insideState highway office
FM 1266State highway1.2 roadway miles insideState highway office
Texas State Highway 96Highway nearby1.2 miles outsideState highway office
Union PacificRailroad2.13 track miles insideThe railroad
Bordens GullyStream0.96 channel miles insideChecked for Corps of Engineers jurisdiction
Benson BayouStream0.85 channel miles insideChecked for Corps of Engineers jurisdiction
Geisler GullyStream0.7 channel miles insideChecked for Corps of Engineers jurisdiction
Gum BayouStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Magnolia BayouStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Galveston County Water Company CanalStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific owns 2.13 track miles in Dickinson on its Galveston Subdivision, and six street and rail crossings are mapped inside the city. The track crossing must be planned with the railroad agreement in view. Bordens Gully runs 0.96 channel miles in the city; Benson Bayou and Geisler Gully are also mapped streams. Thirteen street crossings of named streams are mapped, so a creek route needs a path and access plan that keeps the bank and channel uncut.

Whose permission does a Dickinson bore need in Galveston County?

Interstate 45, US 75 and FM 517 are state routes, so work in their right of way needs a TxDOT utility permit reviewed by the Houston District. The utility that owns the line submits through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under that owner’s permit. TxDOT rules require boring or tunneling beneath existing highway pavement, and its permit can set the required depth. A bore under Union Pacific track needs an agreement with the railroad. For a crossing at Bordens Gully, planning includes checking for U.S. Army Corps of Engineers jurisdiction. City streets such as Hughes Road belong to Dickinson.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Dickinson, Galveston County?

The water provider for a specific Dickinson address has to be confirmed with the city, Galveston County or the local water district before a bore is planned. The available records do not identify a provider for each address. CenterPoint Energy, Entergy Texas and Texas-New Mexico Power report electric service in Galveston County; that does not identify the electric line owner at every Dickinson property. We confirm the owner for the route before planning a conduit bore.

Line ownerWhat it isSourceSize
CenterPoint Energy, Entergy Texas and Texas-New Mexico PowerElectric utilities reporting service in Galveston CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We keep Dickinson’s 1984 median housing year in view when planning underground work, not as a map of buried utilities. We use Dickinson’s housing age mix for planning context: 8 percent of homes were built before 1960, 62 percent from 1960 to 1999, and 30 percent in 2000 or later. That mix can mean either replacement work or a new service along Hughes Road. Before drilling near marked utilities in Dickinson, we hydrovac pothole each one on the bore path; paint shows position, not depth. A line below East Avenue needs exposure before the drill approaches.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

How far is Dickinson from League City and our Yukon yard?

Dickinson is in Galveston County, 11 feet above sea level and covers 9.97 square miles. Its ZIP code is 77539. League City is 4.1 miles northwest and is the nearest larger city; Santa Fe is 5.2 miles southwest, while Bacliff and Kemah are each 5.7 miles away in different directions. Galveston, the county seat, is 19.1 miles south. The Yukon yard is 488 road miles away, a drive of 9.5 hours, which is relevant when mobilizing equipment for a Dickinson job.

Places near Dickinson

What boring work comes up near East Avenue in Dickinson?

  • Highway crossing: A route beneath Interstate 45 needs a bore plan that accounts for pavement and the TxDOT right of way.
  • Street service: A water or sewer service near Hughes Road can pass beneath pavement without an open cut across the street.
  • Fiber conduit: A conduit route near East Avenue needs marked utilities exposed before the drill approaches them.
  • Creek crossing: A line under Bordens Gully needs a route planned around the channel and a jurisdiction check during planning.
  • Rail crossing: A bore beneath the 2.13 miles of Union Pacific track in Dickinson needs a railroad agreement.
  • Electric conduit: Near FM 517, we confirm the line owner before planning the conduit route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a Dickinson bore near Hughes Road?

For a route near Hughes Road, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help show whether the line approaches Interstate 45, Union Pacific track or Bordens Gully. Those details let us scope the path, access and crossings before we discuss the work.

We set prices for Dickinson boring work from each job’s details, not from a blanket rate. Ground conditions matter: Dickinson’s mapped clay can affect reaming and pullback. Crossings matter too, including Interstate 45 pavement, Union Pacific track and Bordens Gully. The route length and pipe size shape the work, as do marked utilities to expose, concrete or pavement, pits, excavator time and sand backfill. Our mobilization planning accounts for 488 road miles from Yukon when pricing a Dickinson boring project. For high profile or emergency work in Dickinson, we allow for added planning demands before setting the schedule.

Questions people ask about boring in Dickinson

Does Trinity take directional boring jobs in Dickinson, Galveston County, and who staffs them?

Yes. Trinity takes directional boring work in Dickinson and across Texas. Our Yukon office coordinates the job, with our crews or crews from satellite yards run by partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, including work near Hughes Road or other Galveston County crossings.

What is Vamont soil like for a bore in Dickinson?

Vamont soil is mapped across 29 percent of Dickinson, and clay is mapped across 89 percent at about 40 inches below the surface. Clay can cling to the reamer and grip pipe, so we plan staged reaming and the pullback around the ground. The USDA soil survey maps these patterns; they are not test borings.

Will a bore in Dickinson hit rock below the surface?

Bedrock is not mapped in the upper five feet of Dickinson, which does not establish what lies deeper. The geologic map identifies the Beaumont Formation, areas predominantly clay, of Pleistocene age. We plan from the route and available site information rather than treating the map as a test boring.

Who approves a bore beneath Interstate 45 in Dickinson?

TxDOT reviews work in the Interstate 45 right of way through its Houston District. The utility owner submits the application in TxDOT’s online RULIS system, while we prepare the bore plan and profile and work under the permit issued to that owner. TxDOT rules require boring or tunneling beneath existing highway pavement.

What do we need to plan for when boring beneath Union Pacific track in Dickinson?

A bore under the Union Pacific Galveston Subdivision needs an agreement with the railroad. That agreement addresses crossing conditions such as casing, depth and flagging. Dickinson has 2.13 track miles owned by Union Pacific, so the exact crossing location and route need to be established before work is planned.

Can a line be bored beneath Bordens Gully in Dickinson?

A bore can be planned beneath Bordens Gully, which runs 0.96 channel miles inside Dickinson. The route needs to stay below the channel and avoid cutting the bank. During planning, the crossing is checked for U.S. Army Corps of Engineers jurisdiction, and site access and ground conditions also shape the bore.

Can I call after hours about an urgent bore near East Avenue in Dickinson?

Yes. A person answers Trinity’s phone 24 hours a day at (405) 409-7423, and we provide 24 hour emergency response. For an urgent job near East Avenue, have the location and the line or crossing details ready so we can understand the request and next steps.

How much notice does Texas811 need for a bore near Hughes Road in Dickinson?

For a bore near Hughes Road, submit the Texas811 locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays; Texas811 describes this as two working days. The request cannot be made more than 14 days ahead. If the start slips more than 14 days past the original notice, make a new request, and have worn or moved marks refreshed before work continues.

What affects the cost of directional boring near Interstate 45 in Dickinson?

The job scope determines the price, not one fixed factor. Length, pipe size and Dickinson’s clay affect the drilling plan; Interstate 45 pavement, Union Pacific track or a Bordens Gully crossing can add crossing work. Marked utilities, pits, excavator time, backfill, concrete and mobilization from the Yukon yard also affect the job. High profile or emergency work may change the planning needs.

Where the Dickinson facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Dickinson

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Dickinson, Texas

Type the address of your job in Dickinson. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Dickinson

Same county: Texas City · Galveston · Friendswood · La Marque · Hitchcock · San Leon · Bolivar Peninsula · Bayou Vista · Tiki Island · Jamaica Beach. All counties: Texas county list.