Clear Lake Shores Texas Directional Boring: Bernard Clay, Jarbo Bayou, FM 2094
Quick Answer: Before a bore near Shore Drive, confirm the address water provider with the city, county or local water district; CenterPoint Energy, Entergy Texas and Texas-New Mexico Power report electric service in Galveston County. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), for routes beneath FM 2094 and other Clear Lake Shores features. Clear Lake Shores is 487 road miles from our Yukon, Oklahoma main office, so mobilization is part of a Shore Drive job plan. Bernard clay loam and the mapped clay at 40 inches can grip pipe, so staged reaming and fluid control matter.
Clear Lake Shores bores at a glance
- Incorporated city in Galveston County, Texas. Population 1,294 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 487 miles, about 9.6 hours of driving.
- Ground: Bernard soil is mapped on 31 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 2094 and Texas State Highway 146. State permit office: TxDOT Houston District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Jarbo Bayou.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Jarbo Bayou in Clear Lake Shores?
For a Clear Lake Shores address, confirm the water provider with the city, Galveston County or the local water district before a bore; CenterPoint Energy, Entergy Texas and Texas-New Mexico Power report electric service in Galveston County, but the specific line owner must be checked. The Census Bureau Vintage 2024 estimate gives Clear Lake Shores 1,294 residents. We install water, sewer, gas, electric conduit and fiber along routes such as Clear Lake Road, where the marked line owner shapes the connection plan.
Our main office is in Yukon, Oklahoma, and Clear Lake Shores work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. When planning a crossing near Shore Drive, our family business draws on experience dating to 1965 and directional boring since 1982. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. A service bore along Shore Drive is a smaller scope beside that reach.

What is Bernard soil like to bore in Clear Lake Shores?
The USDA soil survey maps Bernard soil across 31 percent of Clear Lake Shores; Bernard clay loam, 0 to 1 percent slopes, also accounts for 31 percent of mapped area. Verland silty clay loam covers 9 percent, with the Leton complex at 6 percent. At about 40 inches, clay is mapped across 44 percent of the area, and average clay content at that depth is 43 percent. Our mapped Bernard, Verland, Leton and Sievers soil patterns are not test borings. They point to sticky ground that can ball on a reamer and grip pipe, so a route near Shore Drive calls for staged reaming and a same day pull once the hole is ready.
| USDA soil survey, inside the Clear Lake Shores city limits | What is mapped |
|---|---|
| Soil series mapped | Bernard 31 percent, Verland 9 percent, Leton 6 percent, Sievers 5 percent and Bacliff 4 percent |
| Texture at the surface | clay loam 31 percent, silty clay loam 9 percent and loam 8 percent |
| Texture about 40 inches down | clay 44 percent, clay loam 6 percent and fine sandy loam 5 percent |
| Engineering class about 40 inches down | fat clay (CH) 44 percent, lean clay (CL) 11 percent and clayey sand (SC) 5 percent |
| Average clay content about 40 inches down | 43 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 60 percent of the area |
| Flood prone soils | 13 percent of the area |
| High corrosion risk for uncoated steel | 54 percent of the area |
In Clear Lake Shores, bedrock is not mapped in the top five feet, though that does not rule out deeper rock. A seasonal water table is mapped within 60 inches across 60 percent of the area, so pits near Shore Drive may need compact footprints and pumping. Flood prone soils cover 13 percent; a Jarbo Bayou route needs channel depth planning and a check for U.S. Army Corps of Engineers jurisdiction. High steel corrosion risk covers 54 percent, so the line owner should weigh casing and tracer wire materials; HDPE is unaffected. The Pleistocene Beaumont Formation, areas predominantly clay, is mapped as clay and mud, which calls for planning around sticky ground.
How do we bore through clay loam in Clear Lake Shores?
Bernard clay loam and the clay mapped at 40 inches point to a sticky bore near Shore Drive. We adjust the fluid and reaming sequence to keep the hole workable without pushing excess pressure toward pavement.
- For Bernard clay loam near Shore Drive, we use thinner drilling fluid and polymer, then open the bore in stages so sticky cuttings do not bind the reamer.
- Where heavy clay is mapped at about 40 inches, we watch fluid returns closely and limit pressure near FM 2094 pavement to reduce the risk of lifting it.
- With seasonal water table mapped within 60 inches across 60 percent of the area, we keep pits compact and pump water when a Shore Drive site requires it.
- Before drilling near a marked line along Marina Bay Drive, we pothole it with hydrovac; the surface mark gives position, while the exposure reveals depth.

Can we bore across Shore Drive in Clear Lake Shores?
FM 2094 has 0.9 mapped roadway miles inside Clear Lake Shores, and Texas State Highway 146 has 0.2 miles. Texas State Highway 96 is 1.0 miles beyond the city limits. Shore Drive is the longest named street at 1.58 miles, followed by Marina Bay Drive at 1.01 miles and Clear Lake Road at 0.7 miles. A bore under one of these routes can leave pavement and driveways uncut, with entry and exit pits placed off the traveled surface where the route allows.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 2094 | State highway | 0.9 roadway miles inside | State highway office |
| Texas State Highway 146 | State highway | 0.2 roadway miles inside | State highway office |
| Texas State Highway 96 | Highway nearby | 1 miles outside | State highway office |
| Jarbo Bayou | Stream | 0.04 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Clear Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Clear Lake | Lake or pond | 772 acres, inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Clear Lake Shores or within one mile outside it, and no street and rail crossings are mapped. Jarbo Bayou runs 0.04 channel miles inside the city, but no mapped street crosses it. Clear Creek is 0.3 miles outside the limits; Clear Lake is inside the city and spans 772 acres within one mile. Any proposed bayou, creek or lake crossing needs route specific review, including a check for U.S. Army Corps of Engineers jurisdiction.
Who approves a bore near Galveston County roads in Clear Lake Shores?
FM 2094 and Texas State Highway 146 are state routes in Clear Lake Shores, so work in their right of way needs a TxDOT utility permit reviewed by the TxDOT Houston District. The utility owner submits through TxDOT’s RULIS system; we prepare the bore plan and profile for that owner and work under its permit. TxDOT rules call for boring or tunneling beneath existing highway pavement, with highway crossings encased. Clear Lake Shores city streets belong to the city itself. A Jarbo Bayou crossing is checked for federal waterway jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What lines are already in the ground in Galveston County near Clear Lake Shores?
EPA drinking water records do not identify a water provider for the specific Clear Lake Shores address. Before planning a bore, confirm that provider with the city, Galveston County or the local water district. CenterPoint Energy, Entergy Texas and Texas-New Mexico Power report electric service in Galveston County, but that does not identify which company owns the line at every address. We confirm the specific electric line owner before planning conduit along FM 2094 or another route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| CenterPoint Energy, Entergy Texas and Texas-New Mexico Power | Electric utilities reporting service in Galveston County | EIA Form 861 | Confirm the line owner by address |
Clear Lake Shores’s median housing year is 1988 in the 2019 to 2023 estimates; we do not infer bore depth from housing age. The estimates place 6 percent of housing before 1960, 60 percent from 1960 to 1999 and 34 percent in 2000 or later. A bore along Marina Bay Drive could serve a replacement or a newer service; housing age does not establish the age of buried lines. We use Texas811 marks and hydrovac potholing to expose marked utilities before drilling near them, since paint shows position, not depth.

How far is Clear Lake Shores from Kemah and our Yukon office?
Clear Lake Shores is an incorporated city in Galveston County, with 0.43 square miles of land, an elevation of 6 feet and ZIP code 77565. Kemah is 1.3 miles southeast; El Lago is 2.0 miles north; Taylor Lake Village is 2.5 miles northwest; Nassau Bay is 3.3 miles west; and Bacliff is 3.6 miles southeast. Galveston, the county seat, is 25.1 miles south, while Nassau Bay is the nearest larger city. The Yukon yard is 487 road miles away, a 9.6 hour drive, which figures into mobilization planning.
Places near Clear Lake Shores
- Directional boring in Kemah: 1.3 miles southeast
- El Lago: 2 miles north
- Taylor Lake Village: 2.5 miles northwest
- Nassau Bay: 3.3 miles west
- Directional boring in Bacliff: 3.6 miles southeast
What boring work comes up around Jarbo Bayou in Clear Lake Shores?
- Highway crossing: A route beneath FM 2094 needs a bore plan that fits the state highway right of way and keeps the pavement intact.
- Street service: A water or sewer service along Clear Lake Road can run beneath the street surface, with pits placed for the available access.
- Fiber conduit: A conduit route beside Marina Bay Drive needs marked utilities exposed before the drill approaches their recorded positions.
- Drainage crossing: A proposed bore near Jarbo Bayou needs depth planning beneath the channel and a jurisdiction check during planning.
- Lake route: A line planned near Clear Lake needs a route review for the water crossing and access for the entry and exit pits.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near FM 2094 in Clear Lake Shores?
For a bore near FM 2094, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. The route matters in Clear Lake Shores because a street bore, a utility crossing and a nearby drainage feature can call for different access and planning.
The estimate follows the route and work, not length alone. Bernard clay can add reaming and fluid control needs; a crossing under FM 2094 brings state right of way planning into scope. The number and depth of utilities to expose, pavement or concrete, drainage crossings, pit size, excavator time and sand backfill all affect the work. Clear Lake Shores is 487 road miles from Yukon, so mobilization also matters; high profile or emergency work can add planning demands.
Questions people ask about boring in Clear Lake Shores
Does Trinity take directional boring work in Galveston County and Clear Lake Shores?
Yes. We take directional boring work in Texas, including Clear Lake Shores in Galveston County. Our own crews and partner drilling contractors we have vetted can staff the work, while Trinity remains the point of contact from the first call through the bore log. Confirm the water provider and electric line owner for the specific address before setting the route.
Who controls Clear Lake Road in Clear Lake Shores, and can you bore without cutting it?
Because Clear Lake Shores is an incorporated city in Galveston County, we treat city streets such as Pine Road as city owned. Directional boring can place a line beneath Clear Lake Road without opening a trench through the street, subject to the route, access and utility checks. Pits still need space at each end, and marked lines on the path must be exposed before drilling near them.
How old are buried lines near Marina Bay Drive in Clear Lake Shores?
Housing age does not establish buried line age, so we do not assume a pipe needs replacement from the home date alone. The American Community Survey 2019 to 2023 estimates put the median housing year at 1988. For a replacement bore near Marina Bay Drive, we locate and expose marked utilities first, then plan the new route around what is actually present.
Can groundwater or flooding affect bore pits near Jarbo Bayou in Clear Lake Shores?
It can. The USDA soil survey maps seasonal water table within 60 inches across 60 percent of Clear Lake Shores and flood prone soils across 13 percent. Pits near Jarbo Bayou may need compact footprints and pumping. A channel route also needs depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
Does Bernard soil in Clear Lake Shores corrode steel, and what pipe should I use?
The mapped area has high steel corrosion risk across 54 percent, so the line owner should consider casing and tracer wire materials for a Bernard soil route. With Verland soils in Clear Lake Shores, we use HDPE because that soil corrosion concern does not affect it. The line owner selects the materials and any coating; we use those choices when planning a bore near Shore Drive.
What ground will a bore pass through in Bernard soil in Clear Lake Shores?
The USDA soil survey maps Bernard clay loam across 31 percent of Clear Lake Shores. At about 40 inches, clay is mapped across 44 percent of the area, with average clay content of 43 percent. Our Clear Lake Shores clay loam soil maps show patterns, not test borings. Sticky clay can build up on a reamer and grip pipe, so we plan staged reaming.
How far is Clear Lake Shores from Yukon, and does Nassau Bay change mobilization?
Clear Lake Shores is 487 road miles and a 9.6 hour drive from our Yukon, Oklahoma main office, so we schedule coordination remotely. Nassau Bay is 3.3 miles west of Clear Lake Shores, but that nearby location does not change the distance from Yukon. The travel distance is part of mobilization planning for a bore on Shore Drive or FM 2094.
How early should I call 811 before boring on Shore Drive in Clear Lake Shores?
For a Shore Drive bore, request locates through Texas811 at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays; Texas811 describes this as at least two working days. The request cannot be made earlier than 14 days before the start. If the start moves more than 14 days beyond the original notice, submit a new request; refresh worn or moved marks before work continues.
What affects the price of directional boring near FM 2094 in Clear Lake Shores?
The route and job scope determine the price, with no single factor deciding it. Bernard clay can affect drilling time; a crossing at FM 2094 adds highway planning. Other factors include footage, pipe or conduit size, utilities to expose, pavement, drainage crossings, pit work, excavator time, sand backfill and mobilization from Yukon. High profile or emergency work can also affect the scope.
Where the Clear Lake Shores facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Clear Lake Shores
- U.S. Census Bureau, TIGER/Line 2024: Clear Lake Shores boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Clear Lake Shores
- U.S. Census Bureau, American Community Survey 2019 to 2023: Clear Lake Shores housing units and year built
- Macrostrat geologic map compilation: map units under Clear Lake Shores
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Galveston County
- U.S. Geological Survey, Elevation Point Query Service: Clear Lake Shores elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Clear Lake Shores
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Clear Lake Shores
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Clear Lake Shores, Texas
Type the address of your job in Clear Lake Shores. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Clear Lake Shores
Same county: League City · Texas City · Galveston · Friendswood · Dickinson · La Marque · Santa Fe · Hitchcock · San Leon · Bolivar Peninsula · Bayou Vista · Tiki Island. All counties: Texas county list.
