La Paloma Texas Directional Boring: Laredo Soil, Clay And US 281
Quick Answer: What does the top five feet of La Paloma ground look like? The USDA soil survey maps clay across 45 percent of the area at about 40 inches, while the geologic map shows Holocene lower Rio Grande flood plain alluvium. We do directional boring, also called horizontal directional drilling (HDD), under or alongside US 281 in La Paloma. The Yukon main office is 718 road miles away, with Palmer 1.6 miles northeast. Heavy clay can stick to a reamer and grip pipe.
La Paloma bores at a glance
- Unincorporated community in Cameron County, Texas. Population 3,218 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 718 miles, about 14.1 hours of driving.
- Ground: Laredo soil is mapped on 42 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 281. State permit office: TxDOT Pharr District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near US 281 in La Paloma?
La Paloma is an unincorporated census designated place in Cameron County, with 3,218 people in the 2020 Census count; the Census Bureau does not publish yearly estimates for unincorporated places. We install water and sewer lines, gas lines, electric conduit and fiber along routes such as Calle Rancho Grande and Calle San Pedro, or beneath US 281 where the alignment calls for a bore.
Our main office is in Yukon, Oklahoma, and La Paloma work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For work near US 281, our range runs from a 3/4 inch service line to 48 inch casing. Our family business began in 1965, and we have done directional boring since 1982.

What does Laredo soil say about the ground in La Paloma?
The USDA soil survey maps Laredo soil across 42 percent of La Paloma and Benito soil across 23 percent. Harlingen soil covers another 22 percent. At about 40 inches, clay is mapped across 45 percent of the area, with silty clay loam across 26 percent and silt loam across 15 percent. These are mapped soil patterns, not test borings. Clay can hold an open hole, but it can also stick to the reamer and swell around pipe, so the actual bore path still needs field judgment.
| USDA soil survey, inside the La Paloma mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Laredo 42 percent, Benito 23 percent, Harlingen 22 percent, Olmito 7 percent and Rio Grande 6 percent |
| Texture at the surface | clay 45 percent, silt loam 33 percent and silty clay loam 15 percent |
| Texture about 40 inches down | clay 45 percent, silty clay loam 26 percent and silt loam 15 percent |
| Engineering class about 40 inches down | fat clay (CH) 52 percent and lean clay (CL) 48 percent |
| Average clay content about 40 inches down | 46 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 23 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 35 percent of the area |
For La Paloma, bedrock is not mapped within the top five feet, while the geologic map identifies Holocene silty and sandy flood plain alluvium of the lower Rio Grande. Seasonal water tables are mapped within 40 inches across 23 percent of the area, so pits there may need pumping. Flood prone soils cover 6 percent. High steel corrosion risk is mapped across 35 percent, a concern for uncoated casing and tracer wire that the line owner should address.
How do we bore through clay in La Paloma?
La Paloma’s mapped clay can stay open but may ball on the reamer or grip the pipe. We adjust the fluid and reaming sequence to the ground along each route.
- Where La Paloma’s mapped clay dominates, we use thinner fluid with polymer and ream in stages to reduce sticky buildup on the cutting tools.
- On heavy clay routes near US 281, we watch fluid returns and keep pressure controlled beneath pavement so the ground is not lifted.
- If a Calle San Pedro bore reaches an area with a shallow seasonal water table, we keep pits small and pump water as needed.
- Before a bore near Calle Rancho Grande, we hydrovac marked utilities, then track the head from the surface and log depth and pitch.

Where might a line pass under US 281 in La Paloma?
The mapped community includes 1.7 roadway miles of US 281, with no other highway mapped within 1.5 miles outside the boundary. Calle Rancho Grande runs 3.84 miles inside the community, making it the longest named street. Calle San Lucas and Calle San Pedro are also local routes. A bore beneath US 281 or a named street can keep the paved surface uncut, with entry and exit pits set in dirt where the route allows.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 281 | US highway | 1.7 roadway miles inside | State highway office |
| Resaca del Rancho Viejo | Lake or pond | 24 acres, nearby | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside La Paloma or within 1 mile outside it, and no mapped street and rail crossings are recorded in the community. No named streams are mapped inside or within 1 mile outside the boundary. The map does show 7.76 miles of unnamed drainage and Resaca del Rancho Viejo, a 24 acre pond outside the boundary but within 1 mile. A planned water crossing is checked for U.S. Army Corps of Engineers jurisdiction.
Who approves boring work in Cameron County near La Paloma?
La Paloma has no city government, so street and permit authority rests with Cameron County or the state, depending on the road. US 281 is a US highway, so the utility owner files the TxDOT utility permit through RULIS and the TxDOT Pharr District reviews it. We provide the bore plan and profile and work under the permit issued to the utility owner. TxDOT cover rules call for at least 60 inches at highway crossings for electric and communication lines and water lines; the district can set a different depth.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities have lines in Cameron County near La Paloma?
Before planning a water bore on Calle San Pedro, confirm the provider for that specific address with Cameron County or the local water district. Electric service reported in Cameron County includes AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative. The line owner must be confirmed before a conduit bore is planned, since those county providers should not be taken to serve every La Paloma address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative | Electric utilities reporting service in Cameron County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put La Paloma’s median housing year at 2003. The survey places 13 percent of homes before 1960 and 65 percent in 2000 or later. A route on Calle Rancho Grande could serve a new connection or replacement work, but the house age does not identify buried lines. We hydrovac marked utilities along the bore path before drilling near them; paint shows location, not depth.

How far is La Paloma from Palmer and the Yukon yard?
La Paloma is in Cameron County, covers 2.15 square miles and sits at an elevation of 45 feet. Its ZIP code is 78586. Palmer is 1.6 miles northeast, while Encantada-Ranchito-El Calaboz is 1.7 miles southeast and Rice Tracts is 1.7 miles east. San Benito, the nearest larger city, is 5.4 miles north; Brownsville, the county seat, is 13.3 miles east. The Yukon yard is 718 road miles away, or 14.1 drive hours, so distance is part of planning a Calle Rancho Grande job.
Places near La Paloma
- Palmer: 1.6 miles northeast
- Directional boring in Encantada-Ranchito-El Calaboz: 1.7 miles southeast
- Rice Tracts: 1.7 miles east
- Lago: 3.6 miles northeast
- El Camino Angosto: 4.2 miles north
- Directional boring in San Benito: 5.4 miles north
What boring work comes up on Calle San Pedro in La Paloma?
- US 281 crossing: A utility bore beneath the mapped highway can keep the route out of the paved surface, subject to TxDOT review.
- Water service: A service along Calle San Pedro needs its address specific water provider confirmed before the line route is set.
- Fiber route: Calle Rancho Grande’s 3.84 miles inside the mapped community offer a corridor where conduit alignment and existing lines matter.
- Drainage crossing: The 7.76 miles of unnamed drainage call for a profile that stays below the channel where a crossing is needed.
- Electric conduit: Along Calle San Lucas, confirm the line owner and conduit requirements before choosing a path through existing utility corridors.
- Hydrovac potholing: Near homes on Calle Rancho Grande, expose each marked line because utility paint shows location, not burial depth.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What affects a boring quote near Calle Rancho Grande in La Paloma?
Start with the address or map pin, such as a point along Calle Rancho Grande. Tell us what goes in the ground, whether it is water pipe or fiber conduit, then give the size and footage. For a crossing beneath US 281, a sketch or plans help us understand the route and the space available for the pits.
The scope sets the price. Ground matters because clay is mapped across 45 percent of La Paloma at about 40 inches. Crossings matter too: marked utilities to expose, concrete or pavement, and drainage along the unnamed routes can change the work. Length, pipe size, pits, excavator time and backfill also count. Mobilizing from the Yukon yard means accounting for 718 road miles, and emergency or high profile work can add planning needs.
Questions people ask about boring in La Paloma
Does Trinity Boring Solutions take La Paloma jobs in Cameron County, and who staffs them?
Yes. We take directional boring work in Cameron County and staff La Paloma jobs with our own crews or vetted partner drilling contractors working from satellite yards. You work with Trinity from the first call through the bore log, whether the route is near Calle San Pedro or US 281.
What ground will a bore meet in La Paloma, including Laredo soil?
The USDA soil survey maps Laredo soil across 42 percent of La Paloma. At about 40 inches, clay covers 45 percent of the mapped area. That sticky material may hold the hole open but can build on the reamer, so we plan the fluid and reaming approach for the route.
Is a directional bore in La Paloma likely to hit rock?
Bedrock is not mapped in the top five feet of La Paloma, which does not rule out rock at greater depth. The geologic map shows Holocene silty and sandy flood plain alluvium of the lower Rio Grande. A site specific bore plan still accounts for what the drill encounters.
Who approves a bore under US 281 in La Paloma, and which TxDOT office reviews it?
For US 281, the utility owner submits the right of way permit through TxDOT’s RULIS system, and the TxDOT Pharr District reviews it. We provide the bore plan and profile and work under the owner’s permit. The required cover depends on the line type and the district’s permit conditions.
Which electric line owners should I check in Cameron County for La Paloma?
AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative report electric service in Cameron County. That does not establish which provider serves a particular Calle Rancho Grande address. Confirm the line owner before planning an electric conduit bore, and check conduit requirements with that owner.
Does the county control Calle San Pedro in La Paloma, and must it be cut?
La Paloma is unincorporated and has no city government, so a street permit belongs to Cameron County or the state according to road ownership. A bore can pass beneath Calle San Pedro without cutting the roadway when the route and approvals allow; pits are placed in dirt on each side.
How early should I request Texas811 marks for work on Calle Rancho Grande in La Paloma?
Count back at least 48 hours from the planned start on Calle Rancho Grande, excluding Saturdays, Sundays and legal holidays. A request cannot be made more than 14 days ahead. If the start moves more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.
How far is La Paloma from the Yukon office, and does San Benito change the job?
La Paloma is 718 road miles and 14.1 drive hours from the Yukon yard. San Benito is 5.4 miles north of the community, but the distance from Yukon still affects crew mobilization for a Calle San Pedro bore. We stay your contact from the first call through the bore log.
What affects the cost of directional boring in La Paloma near US 281?
The job’s length and pipe or conduit size matter, along with La Paloma’s clay, utility exposures, pavement, drainage crossings and pit work. A route beneath US 281 may require highway planning, while mobilization from Yukon adds logistics. The scope determines the price; we do not set it from the street name alone.
Where the La Paloma facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside La Paloma
- U.S. Census Bureau, TIGER/Line 2024: La Paloma boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: La Paloma population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: La Paloma housing units and year built
- Macrostrat geologic map compilation: map units under La Paloma
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Cameron County
- U.S. Geological Survey, Elevation Point Query Service: La Paloma elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to La Paloma
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in La Paloma
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in La Paloma, Texas
Type the address of your job in La Paloma. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for La Paloma
Same county: Brownsville · Harlingen · Los Fresnos · La Feria · Cameron Park · Primera · Port Isabel · Laguna Vista · Laureles · Laguna Heights · Combes · Rancho Viejo. All counties: Texas county list.
