trinityboringsolutions.com

Laguna Vista Texas Directional Boring: Lomalta Clay, Texas State Highway 100, Laguna Vista Cove

Quick Answer: Laguna Vista is an incorporated town, so its city streets belong to the city; we do directional boring, also called horizontal directional drilling (HDD), for crossings such as Texas State Highway 100. The Yukon main office is 736 road miles away, and Ocean Boulevard is one local route where a planned bore may need street coordination. USDA mapping puts clay at 45 percent at about 40 inches, so sticky ground can load a reamer and grip pipe. We adjust fluid and ream in stages before pulling the line.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Laguna Vista bores at a glance

  • Incorporated city in Cameron County, Texas. Population 3,791 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 736 miles, about 14.4 hours of driving.
  • Ground: Lomalta soil is mapped on 26 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 100 and FM 510. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring under Texas State Highway 100 in Laguna Vista?

Laguna Vista is an incorporated town in Cameron County, where the city owns its streets; the Census Bureau Vintage 2024 estimate puts its population at 3,791. We install water, sewer, gas, electric conduit and fiber along planned routes beneath streets such as Ocean Boulevard and near Texas State Highway 100. The route and line owner help shape the bore plan.

Our main office is in Yukon, Oklahoma, and Laguna Vista work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. That staffing applies whether a line follows Holly Beach Road or crosses Texas State Highway 100. Our family business began in 1965 and has drilled directionally since 1982. Our record of no utility strike in over 25 years matters around existing lines, including electric service reported in Cameron County by AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative.

Ditch Witch directional drill rig with a loaded drill rod rack staged at a commercial jobsite
Our Ditch Witch directional drill with a full rack of drill rod staged at a commercial site. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does a bore meet in Laguna Vista near Lomalta?

The USDA soil survey maps Lomalta clay across 26 percent of Laguna Vista and Sejita silty clay loam across 20 percent. Laredo silty clay loam covers 18 percent, while Point Isabel clay loam covers 15 percent. Across Laguna Vista, we treat Lomalta and Laredo soil mapping as a planning guide, not as a substitute for test borings. At about 40 inches below the surface, clay is mapped across 45 percent of the area and silty clay loam across 21 percent. Clay can stick to a reamer and swell around pipe, so the ground calls for controlled fluid and staged reaming.

USDA soil survey, inside the Laguna Vista city limitsWhat is mapped
Soil series mappedLomalta 26 percent, Laredo 21 percent, Sejita 20 percent, Point Isabel 15 percent and Chargo 12 percent
Texture at the surfaceclay 30 percent, silt loam 21 percent and silty clay loam 20 percent
Texture about 40 inches downclay 45 percent, silty clay loam 21 percent and stratified silt loam to silty clay loam 20 percent
Engineering class about 40 inches downfat clay (CH) 58 percent and lean clay (CL) 40 percent
Average clay content about 40 inches down45 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches68 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel76 percent of the area

The USDA soil survey maps a seasonal water table within 60 inches across 68 percent of Laguna Vista, so pits may need pumping and careful sizing. Flood prone soils cover 3 percent, a reason to check drainage routes such as the mapped unnamed drainage before setting a crossing plan. High steel corrosion risk is mapped across 76 percent, so the line owner should address casing and tracer wire materials. The geologic map labels ground as Water, with no age provided. Bedrock is not mapped in the top five feet, which does not rule out deeper rock.

How do we drill Laguna Vista clay without opening the street?

On Laguna Vista routes through Lomalta clay or Sejita silty clay loam, we keep the bore controlled rather than forcing a large reamer through sticky ground. Texas State Highway 100 crossings also need their own depth and access plan.

  1. In Lomalta clay, we use fluid suited to sticky ground and ream in stages so clay does not build up on the tool or grip the pipe.
  2. With seasonal water mapped near the surface across much of Laguna Vista, we keep pits small where practical and pump water out as needed.
  3. Before drilling near marked lines on Ocean Boulevard, we hydrovac pothole to expose each utility because surface paint shows position, not depth.
  4. We track the drill head from the surface and log depth and pitch, keeping the path controlled beneath Texas State Highway 100.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

What does a bore have to cross in Laguna Vista near Texas State Highway 100?

Texas State Highway 100 has 5.0 mapped roadway miles inside Laguna Vista, and FM 510 has 2.4. Those routes can bring a utility right of way permit and a bore design that stays beneath pavement. Ocean Boulevard is the longest named street in the town at 4.98 miles. Santa Isabel Boulevard runs 2.43 miles, and Holly Beach Road runs 2.31 miles. A route along any of these streets is planned around access, pavement and marked utilities, not just the distance between pits.

CrossingTypeMapped extentWho has a say
Texas State Highway 100State highway5 roadway miles insideState highway office
FM 510State highway2.4 roadway miles insideState highway office
Bahía GrandeLake or pond6,346 acres, nearbyChecked for Corps of Engineers jurisdiction
Laguna MadreLake or pond997 acres, nearbyChecked for Corps of Engineers jurisdiction
Laguna Vista CoveLake or pond607 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Laguna Vista or within one mile outside its limits, so there is no mapped track crossing to plan around. No named streams are mapped in town or within one mile, and no street crossings of named streams are mapped. The town does have 5.94 miles of unnamed drainage, which can affect a route. Laguna Vista Cove is within town limits, while Bahía Grande and Laguna Madre are nearby water bodies; a crossing of a lake or channel is checked for federal jurisdiction during planning.

Who approves a Laguna Vista bore in Cameron County?

Texas State Highway 100 and FM 510 are state highways, so work in their right of way goes through TxDOT, not the city street process. For electric or communication lines crossing either road, the standard cover is at least 60 inches below the lowest crossed grade; along the right of way it is 48 inches. Water crossings call for 60 inches, and pressurized sewer crossings for 60 inches. The utility owner submits the application in TxDOT RULIS for review by the TxDOT Pharr District. We prepare the bore plan and profile and work under the utility owner’s permit. A highway bore is installed by boring or tunneling, with casing and the required extension beneath rural travel lanes.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities should I check in Cameron County before a Laguna Vista bore?

The provider for a specific Laguna Vista address must be confirmed with the city, Cameron County or the local water district before a bore is planned. EPA drinking water records do not tie a provider to this town by name. Electric service reported in Cameron County includes AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative; that does not identify which company owns a line at a particular Ocean Boulevard or Holly Beach Road address. Before we plan a conduit bore near Texas State Highway 100, we confirm the line owner and check with TxDOT Pharr District about permits.

Line ownerWhat it isSourceSize
AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric CooperativeElectric utilities reporting service in Cameron CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates place Laguna Vista’s median housing year at 2001, and we verify underground conditions before boring. The survey estimates 55 percent of housing was built in 2000 or later, 44 percent from 1960 to 1999, and 1 percent before 1960. That mix can mean new service work as well as replacement around established streets such as Ocean Boulevard. We hydrovac pothole each marked utility on the bore path before drilling near it, because paint does not show depth. For example, a marked line beneath Holly Beach Road must be exposed before the drill approaches.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is Laguna Vista in relation to Port Isabel and our Yukon office?

Laguna Vista is an incorporated town in Cameron County, covering 4.83 square miles at an elevation of 9 feet. Its ZIP code is 78578. Laguna Heights is 2.9 miles southeast, Port Isabel is 4.3 miles southeast, and Bayview is 6.6 miles west. South Padre Island is 7.9 miles east. Los Fresnos, the nearest larger city, is 12.1 miles west, while Brownsville, the county seat, is 12.2 miles southwest. The Yukon main office is 736 road miles away, a drive of 14.4 hours, so distance is part of planning a job on Ocean Boulevard or Texas State Highway 100.

Places near Laguna Vista

What would we bore in Laguna Vista near Holly Beach Road?

  • Highway crossing: A Texas State Highway 100 bore is planned beneath the pavement, with the utility owner’s TxDOT permit and the required cover.
  • Street service: Water or sewer work along Holly Beach Road can use pits at the ends of a bore instead of cutting the street.
  • Electric conduit: A route near Ocean Boulevard starts with confirming the line owner among utilities reporting service in Cameron County.
  • Drainage crossing: A route near Laguna Vista’s unnamed drainage needs a plan that accounts for the channel and its banks.
  • Lake side route: Work near Laguna Vista Cove calls for checking whether the planned line approaches a water crossing.
  • Fiber route: A fiber bore along Santa Isabel Boulevard can pass beneath pavement while marked utilities are exposed before drilling.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Laguna Vista bore near Ocean Boulevard?

For Laguna Vista work, send us an Ocean Boulevard address or map pin, installation details, pipe or conduit size, footage, and any sketch or plans. A route on Ocean Boulevard or across Texas State Highway 100 gives us a starting point for checking pavement, access and the utility path. Include any known drainage or marked utility locations.

The largest local cost factor is often the ground: Lomalta clay can cling to the reamer and grip the pipe, which may call for staged passes and more fluid control. Length, pipe or conduit size, marked utility crossings, pavement, drainage crossings, pits and excavator time also shape the work. A Texas State Highway 100 crossing adds permit and bore design needs. Mobilization matters because the Yukon office is 736 road miles from Laguna Vista, and high profile or emergency work can change the scope.

Questions people ask about boring in Laguna Vista

Does Trinity Boring Solutions take directional boring jobs in Laguna Vista and Cameron County?

Yes. We take directional boring work in Laguna Vista, with our own crews and partner contractor satellite yards supporting the job rather than a local office. You work with Trinity from the first call through the bore log. For a route near Texas State Highway 100, we plan the crew and bore around the actual scope.

What ground should I expect for a Laguna Vista bore through Lomalta soil?

The USDA soil survey maps Lomalta clay across 26 percent of Laguna Vista. At about 40 inches below the surface, clay is mapped across 45 percent and silty clay loam across 21 percent. That sticky material can collect on the reamer, so staged reaming and controlled fluid help keep the bore moving.

Will a Laguna Vista directional bore hit rock?

Bedrock is not mapped in the top five feet of Laguna Vista, but that does not rule out rock deeper down. The geologic map labels the area Water and gives no age for that unit. If the bore encounters harder material along Ocean Boulevard, we adjust the tooling and pace to the conditions found.

Who approves a bore under Texas State Highway 100 in Laguna Vista?

TxDOT reviews work in the Texas State Highway 100 right of way through its Pharr District. The utility owner files the application in TxDOT RULIS, while we prepare the bore plan and profile. The permit sets the job requirements, including cover; the standard cover for electric or communication crossings is at least 60 inches.

Who owns electric lines in Laguna Vista and Cameron County, and who confirms conduit specs?

AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative report electric service in Cameron County, but that does not identify the owner at every Laguna Vista address. The specific line owner must be confirmed before a conduit bore. Ask that owner for the conduit requirements for your Ocean Boulevard or Holly Beach Road route.

Do city or county officials control Holly Beach Road in Laguna Vista, and must it be cut?

Because Laguna Vista is an incorporated town in Cameron County, we treat Palm Boulevard as a city street when coordinating boring work. A bore beneath Holly Beach Road can leave the pavement uncut, with pits placed off the roadway where the site allows. We still expose marked utilities along the planned path before drilling near them.

Can I reach Trinity after hours for an urgent Laguna Vista bore near Holly Beach Road?

Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day, including for urgent work near Holly Beach Road. The schedule and mobilization depend on the job details and the distance from the Yukon office, which is 736 road miles from Laguna Vista.

How early should I call 811 for a Laguna Vista bore near Ocean Boulevard?

Contact Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. Paint near Ocean Boulevard shows a line’s position, not its depth. If the start slips more than 14 days past the original notice, request a new ticket; worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of a Laguna Vista bore under Texas State Highway 100?

The price depends on the job scope, especially Lomalta clay, bore length, pipe or conduit size, and how many utilities must be exposed or crossed. Texas State Highway 100 adds right of way and permit planning. Pavement, drainage, pits, excavator time, backfill, emergency scope and mobilization from the Yukon office also affect the work.

Where the Laguna Vista facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Laguna Vista

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Laguna Vista, Texas

Type the address of your job in Laguna Vista. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Laguna Vista

Same county: Brownsville · Harlingen · San Benito · La Feria · Cameron Park · Primera · Laureles · Combes · La Paloma · Rancho Viejo · Santa Rosa · Rio Hondo. All counties: Texas county list.