trinityboringsolutions.com

Laguna Heights Texas Directional Boring: Lomalta Clay, Texas State Highway 100, Laguna Madre

Quick Answer: What lies in the top five feet around Laguna Heights? The USDA soil survey maps Lomalta clay, and bedrock is not mapped there. We take directional boring, also called horizontal directional drilling (HDD), beneath Texas State Highway 100 without cutting its pavement. Our Yukon, Oklahoma main office is 737 road miles away, and Ocean Boulevard is one local street to consider for access. Heavy clay can cling to a reamer, so staged reaming and controlled fluid matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Laguna Heights bores at a glance

  • Unincorporated community in Cameron County, Texas. Population 962 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 737 miles, about 14.4 hours of driving.
  • Ground: Lomalta soil is mapped on 65 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 100. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can bore beneath Texas State Highway 100 in Laguna Heights?

What does the top five feet look like near Texas State Highway 100? The USDA soil survey maps Lomalta clay in Laguna Heights. The Census Bureau counted 962 residents in 2020 and does not publish yearly estimates for this unincorporated place. For routes near Ocean Boulevard or Michigan Street, we install water, sewer, gas, electric conduit and fiber, with the route and existing lines checked before selecting a path.

Our main office is in Yukon, Oklahoma, and Laguna Heights work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, with directional boring work dating to 1982. Our range runs from 3/4 inch service lines to 48 inch casing and bores from 10 feet to 5,000 feet, useful for projects along Ocean Boulevard or Texas State Highway 100.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

How does Lomalta soil affect boring in Laguna Heights?

The USDA soil survey maps Lomalta soil across 65 percent of Laguna Heights and Laredo soil across 34 percent. At about 40 inches below the surface, clay is mapped under 65 percent of the area, while silty clay loam is mapped under 34 percent. The survey also maps an average clay content of 55 percent at that depth. For Laguna Heights, our soil mapping lists Lomalta and Laredo, not test borings. Around Ocean Boulevard, the clay share points to sticky cuttings that can ball on a reamer and grip the pipe.

USDA soil survey, inside the Laguna Heights mapped community boundaryWhat is mapped
Soil series mappedLomalta 65 percent and Laredo 34 percent
Texture at the surfaceclay 65 percent and silt loam 34 percent
Texture about 40 inches downclay 65 percent and silty clay loam 34 percent
Engineering class about 40 inches downfat clay (CH) 65 percent and lean clay (CL) 34 percent
Average clay content about 40 inches down55 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches76 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel76 percent of the area

The USDA soil survey does not map bedrock within 60 inches in Laguna Heights, though that does not rule out deeper rock. Seasonal water tables are mapped within 40 inches under 65 percent of the area, so pits may need pumping. In Laguna Heights, we have no mapped flood prone soils, while the listed surface soil texture is clay. High steel corrosion risk is mapped under 76 percent, which makes the line owner’s casing and tracer wire choices relevant; HDPE is not affected by that soil corrosion concern. The geologic map shows Holocene alluvium in the Rio Grande, predominantly sand, beneath the local soil pattern.

What does it take to bore Laguna Heights clay?

The Lomalta clay mapped around Laguna Heights can stay open, but it can also stick to the reamer. We adjust fluid and reaming to the ground and keep the bore path clear of marked lines.

  1. Lomalta clay can ball up on a reamer, so we use thinner drilling fluid with polymer and enlarge the hole in stages.
  2. With heavy clay mapped under much of Laguna Heights, we watch fluid returns near Ocean Boulevard to keep pressure from lifting pavement.
  3. Seasonal water tables are mapped within 40 inches across 65 percent of the area, so we plan small pits and pump them if water collects.
  4. Before a bore near Harding Boulevard, we expose each marked utility by hydrovac; a surface mark shows position, not depth.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Where might a line go under Texas State Highway 100 in Laguna Heights?

Texas State Highway 100 runs for 1.1 mapped roadway miles inside the Laguna Heights community boundary. Texas State Highway 48 is 1.5 miles outside that boundary. A line along Ocean Boulevard, the longest named street at 1.1 miles, or near Pennsylvania Avenue and Harding Boulevard needs a route planned around pavement and buried utilities. A bore can pass beneath road surfaces rather than cut through them. The path and access points still depend on the project plans and the utilities exposed along the route.

CrossingTypeMapped extentWho has a say
Texas State Highway 100State highway1.1 roadway miles insideState highway office
Texas State Highway 48Highway nearby1.5 miles outsideState highway office
Vadia AnchaLake or pond1,308 acres, nearbyChecked for Corps of Engineers jurisdiction
Laguna MadreLake or pond997 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Laguna Heights or within one mile outside the community boundary, and no street and rail crossings are mapped. No streams or unnamed drainage are mapped inside the boundary, and no street crossings of named streams are mapped. Vadia Ancha and Laguna Madre are nearby water bodies outside the boundary. If a proposed route crosses a lake or other water feature, the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who approves a bore in Laguna Heights and Cameron County?

Laguna Heights is an unincorporated community, so it has no city government; street and permit authority rests with Cameron County or the state, depending on the road. For work in Texas State Highway 100 right of way, the utility owner, not our drilling crew, submits the application through TxDOT’s RULIS system. The TxDOT Pharr District reviews it. We provide the bore plan and profile and work under the permit issued to the utility owner. TxDOT cover rules vary by line type, with highway crossings requiring specified depths and the district able to set another depth in the permit.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities should be checked in Laguna Heights, Cameron County?

EPA drinking water records do not tie a water system to Laguna Heights, so the provider for a specific address has to be confirmed with Cameron County or the local water district before a bore is planned. AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative report electric service in Cameron County. We confirm the electric line owner before planning a conduit bore; those county reports do not establish which utility serves every address along Ocean Boulevard.

Line ownerWhat it isSourceSize
AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric CooperativeElectric utilities reporting service in Cameron CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median housing year in Laguna Heights at 2000. The estimates show 30 percent of housing units built before 1960 and 50 percent built in 2000 or later. A bore near Michigan Street could serve new construction or replace older lines, depending on the address. Along Texas State Highway 100, we hydrovac pothole every marked utility on the bore path before drilling near it; paint shows position, not depth. For example, a marked line under Harding Boulevard must be exposed before the drill approaches.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

What is near Laguna Heights and Laguna Vista?

Laguna Heights is in Cameron County, covers 0.16 square miles and sits at an elevation of 7 feet. Its ZIP code is 78578. Port Isabel is 1.5 miles southeast, and Laguna Vista is 2.9 miles northwest; South Padre Island is 6.1 miles northeast. Port Isabel is the nearest larger city, while Brownsville, the county seat, is 13.3 miles southwest. The Yukon, Oklahoma main office is 737 road miles away, a 14.4 hour drive. That distance is part of planning a job near Texas State Highway 100.

Places near Laguna Heights

What boring work could involve Ocean Boulevard in Laguna Heights?

  • Highway crossing: A line beneath Texas State Highway 100 is bored rather than cut through the existing pavement.
  • Water service: A service route near Ocean Boulevard is planned around the address, the proposed pipe and marked utilities.
  • Fiber conduit: A conduit bore near Michigan Street can pass below the street surface, with each marked line exposed first.
  • Street connection: Work near Harding Boulevard uses entry and exit pits in the dirt instead of an open cut through the road.
  • Lake route: If a proposed line reaches Laguna Madre, the water crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What sets the price for boring near Michigan Street in Laguna Heights?

For a quote near Michigan Street, start with the address or map pin, then say what goes in the ground. When discussing a crossing with the TxDOT Pharr District, we include the pipe or conduit size and footage. A sketch or plans help us see how the proposed route relates to Ocean Boulevard, Texas State Highway 100 and the marked utilities.

Mobilization starts with the 737 road miles from Yukon, then the Lomalta clay and wet ground affect the drilling plan. Price also reflects bore length, pipe or conduit size, utilities that must be exposed, pavement near Texas State Highway 100, pits and excavator time. A drainage or lake crossing may add work if the route reaches one of the nearby water bodies. Access and the project profile along Michigan Street help define the scope.

Questions people ask about boring in Laguna Heights

Does Trinity Boring Solutions take jobs in Laguna Heights, Cameron County, and how are crews assigned?

Yes. We take directional boring work in Laguna Heights and handle the job from the first call through the bore log. Our own crews or crews from satellite yards operated by drilling contractors we have vetted may do the field work. The project location near Texas State Highway 100 helps determine how we staff it.

What ground should I expect for a Laguna Heights bore through Lomalta soil?

The USDA soil survey maps Lomalta across 65 percent of Laguna Heights and clay under 65 percent of the area at about 40 inches down. Clay can stick to the reamer and grip pipe, so we plan staged reaming and manage fluid. The mapped figures describe soil patterns, not a test at your Michigan Street address.

Will our bore in Laguna Heights hit rock where the Laredo soil series is listed?

Bedrock is not mapped within 60 inches in Laguna Heights, but that does not rule out deeper rock. The geologic map shows Holocene alluvium in the Rio Grande, predominantly sand. A planned bore near Ocean Boulevard still follows the actual conditions and project depth rather than treating the map as a site test.

Who approves work under Texas State Highway 100 in Laguna Heights?

For work in Texas State Highway 100 right of way, the utility owner files the permit application in TxDOT’s RULIS system. The TxDOT Pharr District reviews it, and we provide the bore plan and profile. The permit sets the approved conditions for the crossing in Cameron County.

Which company owns electric lines at my Laguna Heights, Cameron County address?

The specific line owner has to be confirmed before planning an electric conduit bore. AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative report electric service in Cameron County, but those records do not identify the provider at every address. Check the line serving your property near Harding Boulevard before setting the route.

Do Laguna Heights county or state officials control Harding Boulevard, and must it be cut?

Laguna Heights has no city government, so street authority belongs to Cameron County or the state according to the road. A directional bore can pass below Harding Boulevard without cutting the street surface. The route still needs marked utilities exposed and entry and exit pits planned in the dirt.

What bore sizes and lengths can you handle near Michigan Street in Laguna Heights?

We handle lines from 3/4 inch service size up to 48 inch casing, and bore lengths from 10 feet to 5,000 feet. A project near Michigan Street is scoped to the line size, route and ground conditions. Those ranges describe our capabilities, not a recommendation for a specific crossing.

How early should I request a locate for Laguna Heights work near Ocean Boulevard?

Texas law requires the Texas811 locate request at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays. You may submit it no earlier than 14 days before work. If an Ocean Boulevard start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of directional boring under Texas State Highway 100 in Laguna Heights?

The price depends on the job scope, including the route length, pipe or conduit size, Lomalta clay, utilities that must be exposed, pavement and pit work. A Texas State Highway 100 crossing also involves permit planning, while the 737 road miles from Yukon affect mobilization. We need the address, proposed line and plans to assess those factors.

Where the Laguna Heights facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Laguna Heights

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Laguna Heights, Texas

Type the address of your job in Laguna Heights. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Laguna Heights

Same county: Brownsville · Harlingen · San Benito · Los Fresnos · La Feria · Cameron Park · Primera · Laureles · Combes · La Paloma · Rancho Viejo · Santa Rosa. All counties: Texas county list.