trinityboringsolutions.com

Port Isabel Texas Directional Boring: Barrada Clay, Texas State Highway 100, Laguna Madre

Quick Answer: The water provider for a Port Isabel address needs confirmation before a bore, and AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative report service in Cameron County. We do directional boring, also called horizontal directional drilling (HDD), in Texas for lines crossing Texas State Highway 100. Port Isabel is 740 road miles from our Yukon main office, and Ocean Boulevard is one of the local routes to plan around. Barrada clay is sticky and can grip pipe, so the reaming and pullback need care.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Port Isabel bores at a glance

  • Incorporated city in Cameron County, Texas. Population 5,210 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 740 miles, about 14.5 hours of driving.
  • Ground: Barrada soil is mapped on 19 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 100 and Texas State Highway 48. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Port Isabel along Texas State Highway 100?

The water provider for a specific Port Isabel address must be confirmed with the city, county or local water district before a bore. AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative report electric service in Cameron County, but the line owner must be confirmed before conduit is planned. Port Isabel has 5,210 residents, according to the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber along routes such as Texas State Highway 100.

Our main office is in Yukon, Oklahoma, and Port Isabel work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982; for Port Isabel projects, we plan around the 740 road miles from Yukon main office. Four decades of boring matter in Port Isabel, where Barrada clay can stick to a reamer and seasonal water can fill pits.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

How does Barrada soil affect drilling in Port Isabel?

The USDA soil survey maps Barrada soil across 19 percent of Port Isabel, with Sejita at 14 percent, Point Isabel at 13 percent and Lomalta at 10 percent. Those mapped shares describe area patterns, not test borings at a particular Ocean Boulevard job. About 40 inches down, clay is the leading mapped texture, at 42 percent; the average clay content at that depth is 45 percent. Sticky clay can ball up on a reamer and grip the pipe, so crews need controlled fluid and staged reaming.

USDA soil survey, inside the Port Isabel city limitsWhat is mapped
Soil series mappedBarrada 19 percent, Sejita 14 percent, Point Isabel 13 percent, Lomalta 10 percent and Laredo 3 percent
Texture at the surfaceclay 29 percent, silty clay loam 14 percent and clay loam 13 percent
Texture about 40 inches downclay 42 percent, stratified silt loam to silty clay loam 14 percent and silty clay loam 3 percent
Engineering class about 40 inches downfat clay (CH) 42 percent and lean clay (CL) 17 percent
Average clay content about 40 inches down45 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches48 percent of the area
Flood prone soils22 percent of the area
High corrosion risk for uncoated steel44 percent of the area

Bedrock is not mapped in Port Isabel’s top five feet, but that does not rule out rock deeper down. The USDA maps a seasonal water table within 60 inches across 48 percent of the area, so pits near Laguna Madre may need pumping. Flood prone soils cover 22 percent, which calls for attention to channel depth at a water crossing. High steel corrosion risk is mapped across 44 percent, a concern for uncoated casing or tracer wire. The mapped geologic unit is Silty and sandy flood plain alluvium of Holocene age, mostly silt and sand.

How do crews bore through clay in Port Isabel?

Barrada clay and the mapped seasonal water table shape the bore plan in Port Isabel. We adjust fluid, reaming and pit work to the ground at the route, then track the drill head as it advances.

  1. Barrada clay can stick to the reamer and grip the pipe, so we use thinner fluid with polymer and open the hole in stages.
  2. With 45 percent average clay mapped at about 40 inches, we watch fluid returns and keep pressure controlled beneath pavement on Ocean Boulevard.
  3. A seasonal water table is mapped within 60 inches across 48 percent of Port Isabel, so crews keep pits small and pump them if water collects.
  4. We hydrovac expose each marked utility near Texas State Highway 100 before drilling toward it, then track the head by walkover locator and log depth and pitch.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

What could a new line cross in Port Isabel near Texas State Highway 100?

Texas State Highway 100 has 8.5 mapped roadway miles inside Port Isabel, while Texas State Highway 48 has 0.5. A bore under the state highway needs a plan for the road right of way and the utility’s required cover. Local street routes also matter: Ocean Boulevard runs 3.64 miles in the city, State Park Road 100 runs 2.05 miles, and Shore Drive runs 2.01 miles. Queen Isabella Cswy adds another mapped route to check against the proposed alignment.

CrossingTypeMapped extentWho has a say
Texas State Highway 100State highway8.5 roadway miles insideState highway office
Texas State Highway 48State highway0.5 roadway miles insideState highway office
Bahía GrandeLake or pond6,346 acres, insideChecked for Corps of Engineers jurisdiction
Vadia AnchaLake or pond1,308 acres, insideChecked for Corps of Engineers jurisdiction
Laguna MadreLake or pond997 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Port Isabel or within one mile outside the city limits, so there is no mapped track crossing to plan for here. No streams are mapped inside or within one mile outside the limits, and no mapped street crossings of named streams are identified. The city does have 1.01 miles of unnamed drainage and lakes including Bahía Grande, Vadia Ancha and Laguna Madre. A lake crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Whose approval does a bore need in Port Isabel, Cameron County?

Because Port Isabel is an incorporated city, we plan street boring on Ocean Boulevard with city street ownership in mind. Work in the right of way of Texas State Highway 100 or Texas State Highway 48 needs a TxDOT utility permit, reviewed by the TxDOT Pharr District. The utility that owns the line submits the application through RULIS; we prepare the bore plan and profile and work under that utility’s permit. Cover requirements affect depth under Texas State Highway 100: electric and communication lines need 60 inches below the lowest crossed grade, and water lines need 60 inches. A lake crossing near Laguna Madre is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns existing utility lines in Port Isabel, Cameron County?

The water provider for a specific Port Isabel address has to be confirmed with the city, Cameron County or the local water district before a bore is planned. EPA drinking water records do not tie a provider to a specific address here. AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative report electric service in the county; confirm the actual line owner before planning conduit. That owner can provide the conduit specifications for a route along Ocean Boulevard or another street.

Line ownerWhat it isSourceSize
AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric CooperativeElectric utilities reporting service in Cameron CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The 2019 to 2023 five year estimates put Port Isabel’s median housing year at 1983; we plan underground routes with Barrada soil in mind. It reports 9 percent of housing built before 1960, 75 percent from 1960 to 1999, and 16 percent in 2000 or later. A route on Shore Drive may serve replacement work or a newer connection, so the existing lines need checking either way. We hydrovac pothole marked utilities on the bore path before drilling near them; paint shows position, not depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Do you cover Port Isabel and nearby Laguna Vista?

Port Isabel is in Cameron County, 13.5 miles east of county seat Brownsville. The incorporated city covers 6.79 square miles and sits at an elevation of 4 feet. Its ZIP code is 78578. Laguna Heights is 1.5 miles northwest, Laguna Vista is 4.3 miles northwest, and South Padre Island is 6.2 miles northeast. Brownsville, the nearest larger city, is 13.5 miles west. Port Isabel is 740 road miles and a 14.5 hour drive from our Yukon, Oklahoma main office, so distance is part of planning a job on Texas State Highway 100.

Places near Port Isabel

What bore work comes up near Port Isabel’s State Park Road 100?

  • Highway crossing: A Texas State Highway 100 bore needs a planned path and cover depth under the road right of way.
  • Water service: A service line on Ocean Boulevard starts with confirming the water provider for the specific Port Isabel address.
  • Fiber route: Fiber along State Park Road 100 can be bored beneath pavement rather than cutting across the road surface.
  • Electric conduit: Before a Shore Drive conduit bore, confirm whether AEP Texas Central, Brownsville Public Utilities Board or Magic Valley Electric Cooperative owns the line.
  • Lake crossing: A route near Laguna Madre is checked for U.S. Army Corps of Engineers jurisdiction during planning.
  • Drainage crossing: The 1.01 miles of unnamed drainage in Port Isabel call for a path planned around the local channel.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Port Isabel’s Ocean Boulevard?

For an Ocean Boulevard quote, send the address or map pin, what will go in the ground, the pipe or conduit size and footage; a sketch or plans help. The ground changes the work: Barrada clay is mapped across 19 percent of Port Isabel, so the route and reaming plan matter as much as the street name.

A bore through Sejita or Barrada clay may need more careful fluid and staged reaming than a short, clear service route. The price also changes with length, pipe or conduit size, utilities to expose, pavement, drainage crossings, pits, excavator time and sand backfill. Texas State Highway 100 adds right of way planning, and the 740 road miles from Yukon affect mobilization. For crossings on Texas State Highway 100, we account for TxDOT Pharr District permits, since emergency or high profile work can change scope.

Questions people ask about boring in Port Isabel

Does Trinity Boring Solutions take directional boring work in Port Isabel and Cameron County?

Yes. We take directional boring work in Port Isabel, with our own crews and partner drilling contractors operating from vetted satellite yards. For work near Queen Isabella Cswy, we coordinate from the first call through the bore log, regardless of which crew is on site. For a route along Texas State Highway 100, the utility owner handles the highway permit application.

Can Barrada soil in Port Isabel corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 44 percent of Port Isabel, including places where Barrada soil is mapped. That is a concern for uncoated steel casing and tracer wire. HDPE is not affected by soil corrosion; the line owner selects any coating for steel. Confirm the material choice with the owner for the Ocean Boulevard route.

What ground does a bore pass through in Port Isabel’s Barrada soil?

The USDA soil survey maps Barrada across 19 percent of Port Isabel and clay across 42 percent of the area at about 40 inches below the surface. Average clay content at that depth is 45 percent. The mapped ground can make a reamer sticky and let clay grip the pipe, so a bore near State Park Road 100 needs controlled fluid and staged reaming.

Will a bore in Port Isabel hit rock below Ocean Boulevard?

Bedrock is not mapped in the top five feet of Port Isabel, which does not rule out rock at greater depth. The geologic map shows Silty and sandy flood plain alluvium of Holocene age, mostly silt and sand. For a bore along Ocean Boulevard, the actual route and depth still shape the drilling plan.

Who approves a bore under Texas State Highway 100 in Port Isabel?

TxDOT reviews a utility permit for work in the Texas State Highway 100 right of way through its Pharr District. The utility that owns the line submits the application in RULIS, and we provide the bore plan and profile for that filing. The permit sets the project requirements, including cover depth beneath the highway.

Which company owns electric lines in Port Isabel, Cameron County, and who confirms conduit specs?

AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative report electric service in Cameron County, but that does not identify the owner for every Port Isabel address. Confirm the line owner and conduit specifications with the owner before planning a bore, including one near Shore Drive.

Can I reach Trinity after hours for an urgent bore on Port Isabel’s Shore Drive?

Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day, and we offer emergency response. If the urgent work is on Shore Drive, have the location and the line or conduit scope ready so we can discuss access, nearby utilities and the next steps.

How much notice does Texas811 need before a bore near Port Isabel’s Ocean Boulevard?

Paint near Ocean Boulevard shows a utility’s position, not its depth. Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

What affects the cost of directional boring under Texas State Highway 100 in Port Isabel?

The scope drives the cost: bore length and pipe size, Barrada clay, utilities that need exposure, pavement, drainage crossings, pits and excavator time all matter. A Texas State Highway 100 crossing also brings right of way planning into the job. Mobilization from the Yukon main office is another factor for this 740 road mile trip.

Where the Port Isabel facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Port Isabel

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Port Isabel, Texas

Type the address of your job in Port Isabel. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Port Isabel

Same county: Harlingen · San Benito · Los Fresnos · La Feria · Cameron Park · Primera · Laureles · Combes · La Paloma · Rancho Viejo · Santa Rosa · Rio Hondo. All counties: Texas county list.