trinityboringsolutions.com

San Benito Texas Directional Boring: Harlingen Clay, Sugar Mill Drain and Union Pacific

Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), for San Benito routes beneath Interstate 69E and other crossings. From our Yukon, Oklahoma main office, the 711 road miles to San Benito shape mobilization for work near Sam Houston Boulevard. The USDA soil survey maps clay across 68 percent of the surface, so sticky cuttings can build on a reamer and slow the pull. We plan the bore path and utility exposures around Sugar Mill Drain and the Union Pacific track before equipment is set.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

San Benito bores at a glance

  • Incorporated city in Cameron County, Texas. Population 24,712 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 711 miles, about 13.9 hours of driving.
  • Ground: Harlingen soil is mapped on 41 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 69E, US 77, US 83, US 77 Business and FM 509. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: Union Pacific, with 21 mapped street and rail crossings.
  • Named streams inside the boundary: Sugar Mill Drain, Resaca de Fresnos, Lateral T Canal and Resaca del Rancho Viejo.
  • Public water: City of San Benito, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for boring near Sam Houston Boulevard in San Benito?

Trinity Boring Solutions takes directional boring work in San Benito, Cameron County, where the Census Bureau Vintage 2024 estimate puts the population at 24,712. Along Sam Houston Boulevard or Mayfield Road, our crews can place water, sewer, gas, electric conduit and fiber while keeping pavement and driveways intact. We handle lines from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet.

Our main office is in Yukon, Oklahoma, and San Benito work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965 and has drilled directionally since 1982. That range fits a San Benito service crossing at Sam Houston Boulevard as well as larger casing needs near Interstate 69E.

Directional drill rig and crew working on a street beside a brick commercial building
Our drill and crew set up on a street beside a brick commercial building. Photos on this page are from our jobs in Oklahoma and Texas.

What is Harlingen soil like to bore in San Benito?

The USDA soil survey maps Harlingen soil across 41 percent of San Benito, with Mercedes covering 21 percent and Laredo 18 percent. Surface texture is clay across 68 percent of the mapped area; at about 40 inches, clay is mapped across 71 percent, and average clay content there is 51 percent. Those are mapped patterns, not test borings. The sticky Harlingen and Mercedes clay can ball on a reamer, so the bore plan needs controlled fluid and staged enlargement rather than a rushed pull.

USDA soil survey, inside the San Benito city limitsWhat is mapped
Soil series mappedHarlingen 41 percent, Mercedes 21 percent, Laredo 18 percent, Benito 5 percent and Olmito 4 percent
Texture at the surfaceclay 68 percent, silty clay loam 13 percent and silty clay 6 percent
Texture about 40 inches downclay 71 percent, silt loam 14 percent and silty clay loam 6 percent
Engineering class about 40 inches downfat clay (CH) 72 percent and lean clay (CL) 25 percent
Average clay content about 40 inches down51 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches5 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel72 percent of the area

The USDA map does not show bedrock in the top five feet of San Benito, and seasonal water table is mapped within 60 inches across 5 percent. Flood prone soils are not mapped, but the silty and sandy flood plain alluvium of Holocene age still calls for attention near Sugar Mill Drain. High steel corrosion risk is mapped across 72 percent, so the line owner should consider casing and tracer wire materials; HDPE avoids that soil concern. Clay can hold the hole, but sticky returns and pressure still need watching.

How do we run a bore through San Benito clay?

On San Benito ground mapped mostly as clay, we match fluid, reaming and pull timing to the route rather than treat every bore like open soil.

  1. Harlingen clay is sticky and can swell around pipe, so we use thinner fluid with polymer and pull the pipe the day the opened hole is ready.
  2. With heavy clay mapped in San Benito, we watch returns and keep fluid pressure controlled near pavement so it does not lift the surface.
  3. At Sugar Mill Drain, we plan depth around the channel and check jurisdiction during planning; staged reaming helps manage clay along the crossing.
  4. Before approaching marked lines on Sam Houston Boulevard, we hydrovac expose each utility on the bore path, then track head depth and pitch from the surface.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Where might a bore pass beneath Interstate 69E in San Benito?

Interstate 69E and US 77 each have 11.6 mapped roadway miles in San Benito; FM 509 has 8.2 and Texas State Highway 345 has 7.0. US 281 is 0.6 miles outside city limits, so a route there may have a different right of way owner than one inside town. Sam Houston Boulevard runs 5.42 miles, Mayfield Road 4.32 and Stenger Street 4.11. Those streets offer route options, but pavement crossings need a bore plan.

CrossingTypeMapped extentWho has a say
Interstate 69EInterstate11.6 roadway miles insideState highway office
US 77US highway11.6 roadway miles insideState highway office
US 83US highway11.6 roadway miles insideState highway office
US 77 BusinessUS highway11.3 roadway miles insideState highway office
FM 509State highway8.2 roadway miles insideState highway office
Texas State Highway 345State highway7 roadway miles insideState highway office
FM 732State highway3.6 roadway miles insideState highway office
FM 510State highway2.1 roadway miles insideState highway office
FM 675State highway0.5 roadway miles insideState highway office
Texas State Highway 80State highway0.3 roadway miles insideState highway office
US 281Highway nearby0.6 miles outsideState highway office
Union PacificRailroad5.97 track miles insideThe railroad
Sugar Mill DrainStream2.92 channel miles insideChecked for Corps of Engineers jurisdiction
Resaca de FresnosStream1.57 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 5.97 track miles inside San Benito, and public mapping records 21 street and rail crossings in the city. Sugar Mill Drain runs 2.92 channel miles; Resaca de Fresnos runs 1.57, and the map counts 29 street crossings of named streams. Lateral T Canal and Resaca del Rancho Viejo add other mapped water routes. Resaca de Los Fresnos and Reservoir No 2 are among nearby mapped water bodies. A route should identify the exact track or channel before pits are placed.

Who approves a San Benito bore near Union Pacific track?

For a bore on Interstate 69E, US 77 or FM 509 right of way, the utility owner applies for the TxDOT utility permit through RULIS, and the TxDOT Pharr District reviews it. For San Benito work, we prepare the bore plan and profile for the utility owner and work under its permit. TxDOT rules call for boring or tunneling beneath existing highway pavement, with the crossing extended beneath all travel lanes on rural highways. A Union Pacific crossing needs an agreement from the railroad owner. For Sugar Mill Drain, planning includes checking whether the crossing is under U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines are near the City of San Benito system?

The City of San Benito public water system draws surface water and lists 7,550 service connections serving 24,250 people. That gives a water bore near Mayfield Road a system to coordinate with, though the address and line owner still matter. In Cameron County, electric service is reported by AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative. We confirm the owner for an electric conduit route near Interstate 69E before setting conduit details.

Line ownerWhat it isSourceSize
City of San BenitoPublic water systemSurface water7,550 connections, 24,250 people served
AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric CooperativeElectric utilities reporting service in Cameron CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put San Benito’s median housing year at 1985; 19 percent of homes were built before 1960, 49 percent from 1960 to 1999, and 32 percent in 2000 or later. A replacement bore near Mayfield Road may follow older services, while newer development can call for a service extension. On either route, we hydrovac expose each marked utility before drilling near it, since paint along the street shows position, not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Where is San Benito near Lago and Harlingen?

San Benito covers 15.8 square miles in Cameron County, at an elevation of 39 feet, with ZIP code 78586. El Camino Angosto is 1.2 miles south, Lago 3.5 miles southeast, and Palmer 4.4 miles south. Harlingen is 5.4 miles northwest and is the nearest larger city; Brownsville, the county seat, is 15.1 miles southeast. Our Yukon yard is 711 road miles away, a 13.9 hour drive, so mobilization matters for work near Interstate 69E.

Places near San Benito

What might we bore near Stenger Street in San Benito?

  • Highway crossing: An Interstate 69E bore can pass beneath pavement without opening the travel lanes, with route depth and right of way planned for TxDOT review.
  • Water service: A City of San Benito connection near Mayfield Road needs the line owner and existing service path confirmed before the new bore is laid out.
  • Fiber route: A conduit run along Sam Houston Boulevard can avoid cutting sidewalks and pavement, with marked utilities exposed by hydrovac before drilling.
  • Drain crossing: At Sugar Mill Drain, a planned bore can keep the channel surface uncut while the crossing depth and jurisdiction are reviewed.
  • Rail crossing: A route beneath Union Pacific track needs the railroad crossing agreement before the bore plan is set.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a bore near Line M Road in San Benito?

For a Line M Road quote, start with the address or map pin, then tell us what is going underground. Add the pipe or conduit size and expected footage. A sketch or plan helps show whether the route reaches a Union Pacific crossing, Sugar Mill Drain or pavement on Line M Road, so we can scope pits and access.

For a Line M Road bore, clay handling can set much of the drilling time because sticky cuttings can load the reamer. We also look at footage and pipe size, utilities to expose, pavement or concrete, and crossings such as Interstate 69E, Sugar Mill Drain or Union Pacific track. Pit size, excavator time and sand backfill can add work. The 711 road miles from Yukon also affect mobilization, and emergency timing or a high profile route can change the plan.

Questions people ask about boring in San Benito

Does Trinity Boring Solutions take jobs in San Benito and Cameron County?

Yes. We take directional boring and HDD work in San Benito, Cameron County, with Trinity managing customer contact from the first call through the bore log. Our Yukon main office coordinates with our own crews or vetted partner contractor yards, so the point of contact does not change if a different crew handles a Sam Houston Boulevard route.

Can a line be bored under Sugar Mill Drain in San Benito?

A bore under Sugar Mill Drain can be planned to keep the channel surface uncut, but the crossing route and ground need review first. During planning, we check whether the water crossing is under U.S. Army Corps of Engineers jurisdiction. The channel runs 2.92 miles inside San Benito, so the exact crossing location matters.

Who runs the public water system in San Benito, and where does its water come from for bores we plan?

The City of San Benito owns the public water system, and its source is surface water. The system lists 7,550 service connections and serves 24,250 people. For a bore near Mayfield Road, the specific line and connection still need to be identified before we plan the route.

Which electric companies report service in San Benito and Cameron County, and who confirms conduit specs?

AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative report electric service in Cameron County, which informs our underground utility checks. That does not establish which provider serves a particular San Benito address. We confirm the line owner before planning a conduit bore near Interstate 69E, so the route and conduit details match the owner’s requirements.

Who handles street access on Stenger Street in San Benito, and does pavement have to be cut?

For work on Stenger Street, coordinate street access with San Benito’s city government; Cameron County governs county roads, not city streets. A bore can pass beneath pavement without opening it, subject to the route and applicable approvals. The street runs 4.11 miles in the city, so the crossing location helps shape the plan.

How old are homes and buried lines near Mayfield Road in San Benito?

The American Community Survey 2019 to 2023 estimates put San Benito’s median housing year at 1985, with 19 percent of homes built before 1960. That age range can mean a replacement bore near Mayfield Road has older services to locate, while newer construction may need an extension. Before drilling near marked utilities in San Benito, we expose them along the planned bore to verify their locations.

How early should I call Texas811 for a bore along Sam Houston Boulevard in San Benito?

Make the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work starts. When a San Benito bore start slips more than 14 days past the original notice, we make a new request. Refresh marks through Texas811 if they wear off or move before work continues along Sam Houston Boulevard.

How far is San Benito from Yukon, and does Harlingen soil change the job?

San Benito is 711 road miles and a 13.9 hour drive from our Yukon main office, which affects mobilization. Harlingen soil is mapped across 41 percent of the city and is clay, so sticky cuttings can slow reaming and call for care with fluid and pull timing.

What affects the cost of a directional bore near Interstate 69E in San Benito?

The route, bore length and pipe size all matter, as do San Benito’s clay, utilities to expose and pavement at an Interstate 69E crossing. Creek or drainage crossings, pits, excavator time and backfill can add work. The 711 road miles from Yukon also affect mobilization, and emergency or high profile work can change the plan.

Where the San Benito facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in San Benito

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in San Benito, Texas

Type the address of your job in San Benito. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for San Benito

Same county: Brownsville · Los Fresnos · La Feria · Cameron Park · Primera · Port Isabel · Laguna Vista · Laureles · Laguna Heights · Combes · La Paloma · Rancho Viejo. All counties: Texas county list.