trinityboringsolutions.com

Collinsville Texas Directional Boring: Gasil Soil, US 377 and Union Pacific Track

Quick Answer: Gasil loamy fine sand is common, but clay below can grip a bore. Along US 377, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), to put lines below pavement. Collinsville is 166 road miles from our Yukon, Oklahoma main office, and the Union Pacific track also shapes route planning. At about 40 inches, clay is mapped across 54 percent of town, so sticky cuttings call for controlled fluid and staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Collinsville bores at a glance

  • Incorporated city in Grayson County, Texas. Population 2,045 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 166 miles, about 3.4 hours of driving.
  • Ground: Gasil soil is mapped on 41 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 44 percent of the area.
  • Highways inside the boundary: US 377, US 377 Business and FM 902. State permit office: TxDOT Paris District.
  • Railroad track inside the boundary: Union Pacific, with 3 mapped street and rail crossings.
  • Public water: City of Collinsville, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near the Union Pacific track in Collinsville?

Gasil loamy fine sand and clay both matter when we plan a bore in Collinsville, Grayson County. The Census Bureau Vintage 2024 estimate puts the town population at 2,045. We install water, sewer, gas, electric conduit and fiber lines, routing them beneath streets such as Main Street or toward properties along US 377.

Our main office is in Yukon, Oklahoma, and Collinsville work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A 3/4 inch service line can be a small Main Street job; a 48 inch casing is at the other end of our range. We handle bores from 10 feet to 5,000 feet. Our family business began in 1965, and we have done directional boring since 1982, experience we bring to Collinsville planning.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Gasil soil make in Collinsville?

The USDA soil survey maps Gasil across 41 percent of Collinsville, with Crosstell at 31 percent and Crockett at 16 percent. Gasil loamy fine sand is a common surface map unit, while the texture changes below. At about 40 inches, clay is mapped across 54 percent of the town and sandy clay loam across 41 percent; average clay content at that depth is 38 percent. When planning Collinsville work, we treat these as mapped soil patterns, not test borings. Sticky clay can ball up on a reamer, so the route needs a plan for fluid and staged reaming.

USDA soil survey, inside the Collinsville city limitsWhat is mapped
Soil series mappedGasil 41 percent, Crosstell 31 percent, Crockett 16 percent, Mabank 8 percent and Callisburg 4 percent
Texture at the surfaceloamy fine sand 41 percent, fine sandy loam 36 percent and loam 23 percent
Texture about 40 inches downclay 54 percent, sandy clay loam 41 percent and sandy clay 4 percent
Engineering class about 40 inches downlean clay (CL) 56 percent and fat clay (CH) 44 percent
Average clay content about 40 inches down38 percent
Bedrock mapped within 60 inches44 percent of the area (0 percent hard rock, 44 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel58 percent of the area

Weathered bedrock is mapped within 60 inches across 44 percent of Collinsville, with typical bedrock depth at 48 inches; hard bedrock is not mapped within that depth. The Woodbine Formation, mapped here as Cenomanian age, includes sandstone and mudstone, so a bore can encounter a slower transition from soil to weathered rock. A seasonal water table and flood prone soils are not mapped in the survey area. High steel corrosion risk is mapped across 58 percent, so the line owner should consider casing and tracer wire materials; HDPE is not affected by that soil corrosion concern.

How do we drill Collinsville clay?

Gasil loamy fine sand at the surface and clay deeper down call for a bore plan that changes with the ground. Around Collinsville streets, we manage sticky cuttings and keep fluid pressure controlled beneath pavement.

  1. In Gasil loamy fine sand, we use drilling fluid to support the hole, then ream in stages so the ground stays stable around the route.
  2. Where Collinsville clay is mapped at about 40 inches, we use thinner fluid with polymer and watch returns to avoid lifting nearby pavement.
  3. On a Main Street route, we expose each marked utility by hydrovac before the drill approaches; surface paint does not show its depth.
  4. For a Union Pacific crossing, we track the drill head from the surface and log depth and pitch as each rod advances.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

What does a bore have to cross near Jordan Creek in Collinsville?

US 377 runs through Collinsville, along with US 377 Business and FM 902. A utility bore under existing highway pavement needs a drilled or tunneled route rather than an open trench. Broadway Street is the longest named street in town at 1.4 miles, followed by Hughes Street at 1.35 miles and Main Street at 1.09 miles. Neathery Avenue covers 0.88 miles. Those streets give a project team local route options to check against marked lines, driveways and pavement before setting pits.

CrossingTypeMapped extentWho has a say
US 377US highway3 roadway miles insideState highway office
US 377 BusinessUS highway1.1 roadway miles insideState highway office
FM 902State highway1.8 roadway miles insideState highway office
Union PacificRailroad0.68 track miles insideThe railroad
Jordan CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Spring CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Union Pacific Choctaw Subdivision has 0.68 track miles inside Collinsville, and public mapping shows three street and rail crossings. A crossing of that track needs an agreement from Union Pacific that sets the work conditions. No named stream crossing is mapped inside town. Jordan Creek is 0.4 miles beyond the limits, and Spring Creek is 0.9 miles away; a route toward either creek calls for checking the crossing and its jurisdiction during planning.

Who has to sign off on a bore under US 377 in Collinsville?

For work on US 377, US 377 Business or FM 902 right of way, the line owner files the utility permit through TxDOT’s online RULIS system. TxDOT Paris District reviews it. We prepare the bore plan and profile for the utility owner, then work under the permit issued to that owner. TxDOT cover requirements depend on the line: electric and communication lines need 60 inches at a highway crossing, water lines need 60 inches, and pressurized sewer lines need 60 inches. A Union Pacific crossing needs an agreement with the railroad; if highway right of way is also involved, TxDOT asks for a copy. A Jordan Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Collinsville water system?

The City of Collinsville public water system uses groundwater wells and reports 1,233 service connections serving 1,866 people. That network matters when a bore route approaches water service lines. Electric utilities reporting service in Grayson County include Oncor Electric Delivery Company, Texas New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Fannin County Electric Cooperative and Grayson Collin Electric Cooperative. Before an electric conduit bore near Main Street, we confirm which company owns the line at that address.

Line ownerWhat it isSourceSize
City of CollinsvillePublic water systemGroundwater wells1,233 connections, 1,866 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Fannin County Electric Cooperative and Grayson-Collin Electric CooperativeElectric utilities reporting service in Grayson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Collinsville’s median housing year at 1982; 13 percent of homes predate 1960, 56 percent were built from 1960 to 1999 and 31 percent in 2000 or later. A replacement bore near Hughes Street may need to work around older buried service, while a newer property may need a new connection. Before drilling near a marked water or electric line, we hydrovac pothole it. Paint shows location, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Do you cover Collinsville and nearby Tioga?

Collinsville is an incorporated town in Grayson County, at an elevation of 739 feet and covering 0.99 square miles. Its ZIP code is 76233. Tioga is 6.0 miles south, Lake Kiowa is 6.1 miles west, and Whitesboro is 6.9 miles north. Pilot Point, the nearest larger city, is 11.5 miles south; Sherman, the county seat, is 16.8 miles east. Our Yukon yard is 166 road miles away, a 3.4 hour drive, so distance can affect crew mobilization for a Collinsville job.

Places near Collinsville

What boring work comes up along Main Street in Collinsville?

  • Highway crossing: A bore under US 377 or FM 902 can keep a new water or fiber line below pavement instead of cutting across the road.
  • Water service: A connection near the City of Collinsville groundwater system needs a route checked against existing water lines before drilling.
  • Street conduit: On Broadway Street, electric or fiber conduit can pass below pavement while pits stay in the dirt at each end.
  • Rail crossing: A route below the Union Pacific Choctaw Subdivision needs the railroad agreement and a plan for the crossing conditions.
  • Creek approach: Work toward Jordan Creek, 0.4 miles outside town, needs a route plan that accounts for the channel and jurisdiction review.
  • Service line: A small bore along Neathery Avenue can bring water, sewer or gas service to a property without cutting the street.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore on Neathery Avenue in Collinsville?

Start with where the work is, such as a pin on Neathery Avenue or a crossing of US 377. Tell us what will go underground, such as a water line near the City of Collinsville system or conduit along Broadway Street. Add the pipe or conduit size and the footage. A sketch or plans help show pits, crossings and the route.

A short route on open ground near Main Street is simpler to plan than a bore with several conflicts. Length, pipe size, Gasil soil and weathered bedrock all affect the work. So do utilities that must be exposed, pavement on US 377, a Union Pacific crossing, creek work near Jordan Creek, pits and excavator time. The 166 road miles between Yukon and Collinsville shape how we plan mobilization for directional boring work. For Collinsville work, we account for added planning demands when a job is high profile or an emergency.

Questions people ask about boring in Collinsville

Does Trinity Boring Solutions take jobs in Collinsville, Grayson County, and who staffs them?

Yes. We take directional boring work in Collinsville and serve Texas from our Yukon main office. Our own crews and vetted partner contractor satellite yards staff work in the area, while you deal with Trinity through the bore log. That setup applies to jobs on Main Street as well as routes elsewhere in Grayson County.

Who owns electric lines in Collinsville, Grayson County, and who confirms conduit specs?

Several providers report electric service in Grayson County, including Oncor Electric Delivery Company and Texas New Mexico Power. That list does not identify the owner at every Collinsville address. We confirm the specific line owner before planning conduit near the City of Collinsville water system or a street such as Broadway Street, and the owner confirms its conduit requirements.

Who controls Main Street in Collinsville, and does a bore require cutting it?

Main Street is a city street because Collinsville is incorporated. Directional boring can place a line below the pavement without an open cut across the street. The planned route still needs marked utilities exposed, and the pits can sit off the paved surface on either side of a Main Street crossing.

What do older homes near Hughes Street in Collinsville mean for replacement bores?

The American Community Survey 2019 to 2023 estimates put the median housing year at 1982, with 13 percent of homes built before 1960. A replacement route near Hughes Street may encounter existing service lines or older buried infrastructure. We check marks and expose utilities along the planned path before drilling near them.

Does Gasil soil in Collinsville corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 58 percent of Collinsville, including areas with Gasil soil. The line owner should weigh casing and tracer wire materials for the specific route; HDPE is not affected by that soil corrosion concern. Soil mapping is not a substitute for checking conditions at the planned bore.

What ground does a bore pass through in Collinsville Gasil soil?

The USDA soil survey maps Gasil across 41 percent of town, with loamy fine sand at the surface in mapped units. At about 40 inches, clay is mapped across 54 percent of Collinsville and sandy clay loam across 41 percent. Sticky clay can gather on the reamer, so staged reaming and controlled fluid help manage the bore.

How far is Collinsville from Yukon, and does Pilot Point change the job?

Our Yukon, Oklahoma main office is 166 road miles and a 3.4 hour drive from Collinsville, which we factor into mobilization planning. Pilot Point is 11.5 miles south and is the nearest larger city, but it does not change the route conditions in Collinsville. The Yukon distance can affect mobilization, especially for a job on US 377 with several crossings.

How much 811 notice does a Collinsville bore near Broadway Street need, and what if marks fade?

For a bore near Broadway Street, place the request through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays. Texas811 describes that timing as two working days. The request cannot be made earlier than 14 days before work, and a start delayed more than 14 days past the original notice needs a new request. Refresh worn or moved marks through Texas811 before continuing.

What affects the price of a Collinsville directional bore under US 377?

The route and scope drive the price, not the highway name alone. Length, pipe or conduit size, Gasil soil, weathered bedrock, pavement, exposed utilities, pits and excavator time all affect the work. A Union Pacific crossing or a creek route toward Jordan Creek adds planning needs, and mobilization reflects the 166 road miles from Yukon.

Where the Collinsville facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Collinsville

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Collinsville, Texas

Type the address of your job in Collinsville. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Collinsville

Same county: Sherman · Denison · Van Alstyne · Howe · Pottsboro · Gunter · Preston · Whitewright · Bells · Sherwood Shores · Southmayd · Tom Bean. All counties: Texas county list.