Whitesboro Texas Directional Boring: Crockett Loam, US 82 and Union Pacific Track
Quick Answer: US 82 and the Union Pacific track are crossings we plan around when we provide directional boring, also called horizontal directional drilling (HDD), in Whitesboro, Texas. The Yukon, Oklahoma main office is 162 road miles away, and a Main Street map pin helps us set the route and mobilization. Crockett soil and heavy clay can stick to a reamer and grip pipe, so the ground affects the drilling sequence. We handle lines from 3/4 inch service lines to 48 inch casing.
Whitesboro bores at a glance
- Incorporated city in Grayson County, Texas. Population 4,145 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 162 miles, about 3.3 hours of driving.
- Ground: Crockett soil is mapped on 54 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 54 percent of the area.
- Highways inside the boundary: US 82, US 377, US 377 Business and Texas State Highway 56. State permit office: TxDOT Paris District.
- Railroad track inside the boundary: Union Pacific, with 3 mapped street and rail crossings.
- Named streams inside the boundary: South Branch Big Mineral Creek.
- Public water: City of Whitesboro, groundwater wells.
- Electric: City of Whitesboro municipal electric system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near the Union Pacific track in Whitesboro?
US 82 and the Union Pacific track are among the local features we plan around for directional boring in Whitesboro, Grayson County. For underground work planning in Whitesboro, we use the Census Bureau Vintage 2024 estimate of population 4,145. Our crews install water, sewer, gas, electric conduit and fiber, routing lines beneath streets such as Main Street or toward services along US 377 where the job calls for a bore.
Our main office is in Yukon, Oklahoma, and Whitesboro work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. This family business began in 1965, with directional boring work dating to 1982. The range from 3/4 inch service lines to 48 inch casing suits projects from a Main Street service connection to a larger crossing near the Union Pacific track.

How does Crockett soil affect a bore in Whitesboro?
The USDA soil survey maps Crockett soil across 54 percent of Whitesboro, with loam as the most common surface texture. At about 40 inches below the surface, clay makes up 71 percent of mapped texture and sandy clay another 15 percent. Average clay content at that depth is 42 percent, and heavy clay is mapped across 88 percent of the area. For Whitesboro planning, we treat these mapped patterns as guides, not test borings. For a bore near Main Street, sticky clay can build on the reamer and hold tightly around the pipe.
| USDA soil survey, inside the Whitesboro city limits | What is mapped |
|---|---|
| Soil series mapped | Crockett 54 percent, Callisburg 15 percent, Crosstell 13 percent, Gasil 6 percent and Aubrey 4 percent |
| Texture at the surface | loam 58 percent, fine sandy loam 33 percent and loamy fine sand 6 percent |
| Texture about 40 inches down | clay 71 percent, sandy clay 15 percent and sandy clay loam 7 percent |
| Engineering class about 40 inches down | fat clay (CH) 52 percent and lean clay (CL) 44 percent |
| Average clay content about 40 inches down | 42 percent |
| Bedrock mapped within 60 inches | 54 percent of the area (0 percent hard rock, 54 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 2 percent of the area |
| High corrosion risk for uncoated steel | 85 percent of the area |
The soil survey maps weathered bedrock within 60 inches across 54 percent of Whitesboro; hard bedrock is not mapped at that depth. Typical bedrock depth is 49 inches, so the bore plan needs to account for possible changes from soil to weathered rock. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 2 percent of the area near drainage features such as South Branch Big Mineral Creek. Across Whitesboro, we account for the mapped high steel corrosion risk covering 85 percent when planning underground work. The Woodbine Formation, a Cenomanian unit of sandstone and mudstone, adds another reason to verify conditions along the route.
How do we plan a directional bore through Whitesboro clay around the mapped conditions?
Crockett soil and clay at about 40 inches call for controlled fluid and staged reaming. We plan the route, expose marked lines, then track the bore so the drill stays on its intended path beneath Whitesboro streets.
- At a route through Crockett soil, we use thinner drilling fluid with polymer and ream in stages to limit clay buildup around the reamer.
- Where Whitesboro’s heavy clay is mapped, we watch fluid returns closely and control pressure so drilling fluid does not lift nearby pavement.
- Before approaching marked lines near Main Street, we hydrovac pothole them because surface paint shows position but not burial depth.
- As a bore advances toward South Branch Big Mineral Creek, we track the drill head from the surface and log depth and pitch.

Which roads, tracks or creeks could a Whitesboro bore cross near Main Street?
US 82 has 4.5 mapped roadway miles inside Whitesboro. US 377 has 3.1 miles, US 377 Business has 1.5 miles, and Texas State Highway 56 has 4.1 miles. Main Street is the longest named street at 2.19 miles, followed by Union Street at 1.49 miles and Bois d’Arc Street at 1.36 miles. Those routes can shape access, bore length and the need to keep pavement intact. The mapped street network totals 55.6 public road centerline miles.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 82 | US highway | 4.5 roadway miles inside | State highway office |
| US 377 | US highway | 3.1 roadway miles inside | State highway office |
| US 377 Business | US highway | 1.5 roadway miles inside | State highway office |
| Texas State Highway 56 | State highway | 4.1 roadway miles inside | State highway office |
| Union Pacific | Railroad | 1.98 track miles inside | The railroad |
| South Branch Big Mineral Creek | Stream | 0.16 channel miles inside | Checked for Corps of Engineers jurisdiction |
| North Branch Big Mineral Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Salt Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Jordan Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific owns 1.98 track miles inside Whitesboro on its Choctaw Subdivision, and public mapping shows 3 street and rail crossings. A bore beneath that track needs the railroad’s crossing agreement, which sets crossing details such as casing, depth and flagging. South Branch Big Mineral Creek runs 0.16 channel miles within the city, and one mapped street crossing of a named stream is present. Creek work is checked for U.S. Army Corps of Engineers jurisdiction during planning. For Whitesboro bore planning, we account for the map showing no lakes or ponds within one mile.
Do I need a permit to bore under US 82 in Whitesboro?
For US 82 and the other state and US highways in Whitesboro, work within the right of way needs a TxDOT utility permit. Electric and communication lines crossing highway grade need 60 inches of cover, while water lines need 60 inches and pressurized sewer lines need 60 inches at crossings; the permit can set another depth. The utility owner, not the drilling contractor, applies through TxDOT’s RULIS system, and the TxDOT Paris District reviews it. We prepare the bore plan and profile for the owner’s application. A Union Pacific crossing also requires its railroad agreement, and South Branch Big Mineral Creek is checked for federal water jurisdiction during planning. As Whitesboro is incorporated, we treat its city streets as city owned when planning a bore.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What lines and services are already in the ground in Grayson County near Whitesboro?
The City of Whitesboro public water system draws from groundwater wells and reports 2,319 service connections serving 4,192 people. The city also owns its municipal electric system, with 2,157 customers reported to EIA. Those systems matter when laying out a water or conduit bore near Main Street: we identify the line owner and expose marked utilities before drilling close to them.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Whitesboro | Public water system | Groundwater wells | 2,319 connections, 4,192 people served |
| City of Whitesboro municipal electric system | City owned electric system | Reports to the U.S. Energy Information Administration | 2,157 customers reported |
| Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Fannin County Electric Cooperative and Grayson-Collin Electric Cooperative | Electric utilities reporting service in Grayson County | EIA Form 861 | Confirm the line owner by address |
For underground planning in Whitesboro, we use the American Community Survey 2019 to 2023 five year estimates: median housing year 1977. It estimates 26 percent of homes were built before 1960, 55 percent from 1960 to 1999 and 19 percent in 2000 or later. That mix can mean replacement work as well as new service connections. Along Main Street, paint shows a marked line’s position, not its depth, so we use hydrovac potholing to expose marked utilities before the bore approaches.

Do you cover Whitesboro and Gainesville?
Whitesboro is in Grayson County, at an elevation of 797 feet, and covers 3.34 square miles. ZIP code 76273 serves Whitesboro, so we use it when organizing local directional boring requests. Sadler is 3.6 miles northeast, Collinsville is 6.9 miles south, Callisburg is 7.0 miles northwest, Oak Ridge is 7.8 miles west and Lake Kiowa is 8.8 miles southwest. Gainesville, the nearest larger city, is 14.1 miles west; Sherman, the county seat, is 16.1 miles east. From our Yukon, Oklahoma main office, Whitesboro is 162 road miles away, about a 3.3 hour drive.
Places near Whitesboro
- Directional boring in Sadler: 3.6 miles northeast
- Directional boring in Collinsville: 6.9 miles south
- Directional boring in Callisburg: 7 miles northwest
- Oak Ridge: 7.8 miles west
- Directional boring in Lake Kiowa: 8.8 miles southwest
- Directional boring in Gainesville: 14.1 miles west
What would we bore near South Branch Big Mineral Creek in Whitesboro?
- Highway crossing: A bore under US 82 keeps the route below the highway grade and avoids cutting across its pavement.
- Water service: A new connection near the City of Whitesboro groundwater system needs a route checked against marked lines and existing services.
- Fiber route: A conduit bore along Main Street can pass below pavement, with marked utilities exposed before drilling approaches them.
- Rail crossing: A route beneath the Union Pacific Choctaw Subdivision needs the railroad agreement to set crossing details.
- Creek crossing: A bore beneath South Branch Big Mineral Creek needs a route planned around the channel and checked for federal jurisdiction.
- Street connection: A service crossing near Bois d’Arc Street can use pits on either side to leave the paved route uncut.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a Whitesboro bore near the Union Pacific track?
A map pin near Main Street or South Branch Big Mineral Creek matters because a small shift can change the crossing and access plan. Send the address or pin, what is going underground, the pipe or conduit size and the footage. A sketch or plans help us check the route before we prepare a quote.
A short, accessible service route near Main Street is simpler to plan than a long crossing under US 82 or the Union Pacific track. Price reflects length, pipe or conduit size, Crockett clay and possible weathered bedrock, plus marked utilities that need exposure. Concrete or pavement, creek crossings, pits, excavator time and sand backfill can add work. Mobilization also depends on the 162 road miles from Yukon, and high profile or emergency work changes the planning scope.
Questions people ask about boring in Whitesboro
Does Trinity Boring Solutions take directional boring work in Grayson County near Whitesboro, and who staffs it?
Yes. We take directional boring work in Whitesboro and across Texas, planning each bore around the stated local conditions. Our own crews do the work, with satellite yards run by partner drilling contractors we have personally vetted. The Yukon main office remains the contact point, so the customer works with Trinity from the first call through the bore log, including work near US 82.
Does Crockett soil in Whitesboro create a steel corrosion concern, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 85 percent of Whitesboro, so the line owner should consider casing and tracer wire materials. For Whitesboro routes, we consider HDPE separately because it is not subject to the mapped steel corrosion concern. The line owner chooses coatings for steel; a route near Crockett soil still needs its own material decision.
What ground does a directional bore pass through in Whitesboro’s Crockett soil?
Crockett is the leading mapped soil series, covering 54 percent of Whitesboro. At about 40 inches, the survey maps clay across 71 percent of the area and sandy clay across 15 percent. The 42 percent average clay content can make the reamer sticky, so staged reaming and fluid control matter.
How much bedrock is mapped within five feet in Whitesboro, and is it hard?
Weathered bedrock is mapped within 60 inches across 54 percent of Whitesboro, with typical bedrock depth at 49 inches. When planning a Whitesboro bore, we use the map indicating hard bedrock is not mapped within that depth. The Woodbine Formation includes sandstone and mudstone, so route conditions can change even where the soil survey maps weathered rather than hard bedrock.
Who approves a Whitesboro bore under US 82, and which TxDOT office reviews it?
The utility owner files the right of way application in TxDOT’s RULIS system, and the TxDOT Paris District reviews it. For Whitesboro city street work, we provide the bore plan and profile for that filing. Cover depends on the line: electric and communication crossings need 60 inches, as do water and pressurized sewer crossings under US 82.
What does a bore under the Union Pacific track in Whitesboro need?
It needs an agreement from Union Pacific, which owns the 1.98 track miles mapped inside Whitesboro on the Choctaw Subdivision. The railroad sets crossing details such as casing, depth and flagging. If the route also occupies highway right of way, TxDOT asks for a copy of that agreement.
How far is Whitesboro from Gainesville and the Yukon office, and does distance affect a bore?
Gainesville is 14.1 miles west of Whitesboro. Our Yukon, Oklahoma main office is 162 road miles away, about a 3.3 hour drive. That travel distance can affect mobilization, while the exact route near US 377 or Main Street determines access, footage and what the bore crosses.
How much 811 notice is needed for a bore near Main Street in Whitesboro, and what if marks move?
For a Main Street bore, Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If our Whitesboro start slips more than 14 days past the original notice, we make a new Texas811 request. Before continuing Whitesboro work, we refresh worn or moved marks through Texas811.
What do we consider when pricing a directional bore beneath US 82 in Whitesboro, including the crossing conditions and work scope?
Length, pipe or conduit size, Crockett clay, pavement and the number of utilities to expose all affect the job. A US 82 crossing can add highway planning, while a Union Pacific or South Branch Big Mineral Creek crossing brings its own route considerations. Pits, excavator time, backfill and mobilization from Yukon also matter.
Where the Whitesboro facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Whitesboro
- U.S. Census Bureau, TIGER/Line 2024: Whitesboro boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Whitesboro
- U.S. Census Bureau, American Community Survey 2019 to 2023: Whitesboro housing units and year built
- Macrostrat geologic map compilation: map units under Whitesboro
- U.S. EPA Safe Drinking Water Information System: public water systems serving Whitesboro
- U.S. Department of Transportation, North American Rail Network: track owners in Grayson County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Grayson County
- U.S. Geological Survey, Elevation Point Query Service: Whitesboro elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Whitesboro
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Whitesboro
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Whitesboro, Texas
Type the address of your job in Whitesboro. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Whitesboro
Same county: Sherman · Denison · Van Alstyne · Howe · Pottsboro · Gunter · Preston · Whitewright · Bells · Tioga · Sherwood Shores · Southmayd. All counties: Texas county list.
