Lantana Texas Directional Boring: Callisburg Soil, FM 407 and Poindexter Branch
Quick Answer: The USDA soil survey maps fine sandy loam across 66 percent of Lantana, with sandy clay at about 40 inches and weathered bedrock within five feet in 19 percent. We do directional boring, also called horizontal directional drilling (HDD), for lines beneath FM 407, where the road crossing shapes the bore plan. Lantana is 189 road miles from our Yukon, Oklahoma main office, and Poindexter Branch adds a creek crossing to check at the selected route. Callisburg soils and clay below the surface affect how we manage the bore fluid and reaming.
Lantana bores at a glance
- Unincorporated community in Denton County, Texas. Population 10,785 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 189 miles, about 3.8 hours of driving.
- Ground: Callisburg soil is mapped on 46 percent of the area, with sandy clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 19 percent of the area.
- Highways inside the boundary: FM 407. State permit office: TxDOT Dallas District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Poindexter Branch and Loving Branch.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near Poindexter Branch in Lantana?
What does the top five feet look like near Lantana Trail? The USDA soil survey maps fine sandy loam across 66 percent of Lantana, with sandy clay common at about 40 inches. The Census Bureau counted 10,785 people in this unincorporated community in the 2020 Census. Along streets such as Lantana Trail, we install water, sewer, gas, electric conduit and fiber lines by directional boring.
Our main office is in Yukon, Oklahoma, and Lantana work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Near FM 407, the work can range from a 3/4 inch service line to a 48 inch casing, with bore lengths from 10 feet to 5,000 feet. Trinity is a family business started in 1965 and has done directional boring since 1982.

What does the USDA survey show about Callisburg soil in Lantana?
Callisburg is the leading mapped soil series in Lantana, covering 46 percent of the area. The USDA soil survey maps Callisburg fine sandy loam on 39 percent of the area at 1 to 3 percent slopes, with another Callisburg fine sandy loam map unit on 6 percent at 3 to 5 percent slopes. Fine sandy loam is the surface texture across 66 percent. At about 40 inches, sandy clay is mapped across 46 percent and sandy clay loam across 21 percent. These are mapped patterns, not test borings, so a route near Lantana Trail still needs site specific planning.
| USDA soil survey, inside the Lantana mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Callisburg 46 percent, Birome 19 percent, Gasil 13 percent, Wilson 8 percent and Konsil 6 percent |
| Texture at the surface | fine sandy loam 66 percent, stony fine sandy loam 19 percent and clay loam 11 percent |
| Texture about 40 inches down | sandy clay 46 percent, sandy clay loam 21 percent and bedrock 19 percent |
| Engineering class about 40 inches down | lean clay (CL) 67 percent, fat clay (CH) 11 percent and silty sand (SM) 3 percent |
| Average clay content about 40 inches down | 36 percent |
| Bedrock mapped within 60 inches | 19 percent of the area (0 percent hard rock, 19 percent weathered rock) |
| Seasonal water table within 60 inches | 3 percent of the area |
| Flood prone soils | 2 percent of the area |
| High corrosion risk for uncoated steel | 77 percent of the area |
The survey maps weathered bedrock within 60 inches on 19 percent of Lantana, with a typical depth of 31 inches; hard bedrock is not mapped in that interval. The Woodbine Formation, a Cenomanian sandstone and mudstone unit, is listed in the area. A soil to rock change can deflect the drill head, so depth and pitch need close attention. Seasonal water table is mapped within 60 inches on 3 percent, and flood prone soils on 2 percent. High steel corrosion risk is mapped on 77 percent, a concern for steel casing and tracer wire; the line owner chooses any coating.
How do we drill Lantana’s sandy clay?
At about 40 inches, sandy clay is mapped across 46 percent of Lantana. We plan for sticky cuttings and possible weathered bedrock, then choose fluid, reaming and tracking steps for the route near FM 407 or Lantana Trail.
- With sandy clay mapped across 46 percent of Lantana at about 40 inches, we use thinner fluid with polymer and ream in stages to manage sticky cuttings.
- Where heavy clay is mapped along a route near Lantana Trail, we watch fluid returns and control pressure so it does not lift pavement.
- Weathered bedrock is mapped within five feet on 19 percent of the area, so we track the head closely through changes near FM 407.
- Before drilling close to a marked line along Copper Canyon Road, we hydrovac pothole to expose it; paint alone does not show depth.

What could a new line cross near Lantana Trail in Lantana?
FM 407 is the state highway mapped inside the Lantana community, with 2.4 roadway miles there. The mapped public road network totals 41.98 centerline miles. Lantana Trail is the longest named street at 5.6 miles, followed by Bonham Parkway at 1.01 miles and Copper Canyon Road at 1.0 mile. A route beneath FM 407 has different coordination from a bore under a local street, and pavement or driveway crossings are planned to avoid open cuts unless the district approves otherwise.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 407 | State highway | 2.4 roadway miles inside | State highway office |
| CPKC (Kansas City Southern) | Railroad nearby | 0.3 miles outside | The railroad |
| Poindexter Branch | Stream | 0.56 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Loving Branch | Stream | 0.3 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Hickory Creek | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Lantana, but CPKC (Kansas City Southern) track is 0.3 miles from the mapped community boundary. No street and rail crossings are mapped inside the community. Poindexter Branch runs 0.56 channel miles inside Lantana and Loving Branch runs 0.3 miles; two street crossings of named streams are mapped. Those creek routes need crossing depth planning, and there are no lakes or ponds mapped within one mile.
Who permits a bore in Lantana and Denton County?
FM 407 is the named state highway in Lantana, and TxDOT reviews utility work in its right of way through the Dallas District. The utility that owns a line submits the application in TxDOT’s RULIS system; we provide the bore plan and profile and work under the permit issued to that owner. Lantana is an unincorporated community with no city government, so local streets and their permissions belong to the county or state, depending on the road. A crossing under CPKC (Kansas City Southern) track needs an agreement with the railroad owner. For a creek crossing at Poindexter Branch or Loving Branch, planning includes checking U.S. Army Corps of Engineers jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve addresses in Lantana and Denton County?
The water provider for a specific Lantana address has to be confirmed with the county or local water district before a bore is planned; available records do not match a provider to the community. Electric utilities reporting service in Denton County include Oncor Electric Delivery Company, Texas New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric Cooperative. Before an electric conduit bore along FM 407 or Lantana Trail, we confirm which company owns the line.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Texas-New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric Cooperative | Electric utilities reporting service in Denton County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Lantana’s median housing year at 2007. The survey says 96 percent of homes were built in 2000 or later, while 2 percent date from before 1960 and 2 percent from 1960 to 1999. That newer housing pattern can mean service extensions as well as replacement work. On a route along Copper Canyon Road, we hydrovac expose marked utilities before drilling near them because locate paint shows position, not depth.

Do you cover Lantana and nearby Copper Canyon?
Lantana is an unincorporated community entirely in Denton County, with an elevation of 612 feet and land area of 2.33 square miles. Its ZIP code is 76226. Copper Canyon is 1.3 miles east, Bartonville is 1.8 miles west, and Double Oak is 2.2 miles south. The nearest larger city, Flower Mound, is 3.9 miles south; Denton, the county seat, is 8.7 miles north. Our Yukon yard is 189 road miles away, a 3.8 hour drive, so that distance is part of planning mobilization for work near FM 407.
Places near Lantana
- Copper Canyon: 1.3 miles east
- Bartonville: 1.8 miles west
- Double Oak: 2.2 miles south
- Directional boring in Highland Village: 3.3 miles east
- Argyle: 3.5 miles west
- Directional boring in Flower Mound: 3.9 miles south
What kinds of bores come up on Copper Canyon Road in Lantana?
- Highway crossing: A conduit beneath FM 407 needs a route and bore plan coordinated with TxDOT Dallas District requirements.
- Water service: A service route along Lantana Trail needs the address water provider confirmed before we plan the connection.
- Fiber drop: Fiber conduit beneath Bonham Parkway can avoid cutting the street, with marked utilities exposed before the drill approaches.
- Creek crossing: A route near Poindexter Branch needs depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
- Rail crossing: Work beneath nearby CPKC (Kansas City Southern) track needs an agreement with the railroad owner.
- Street bore: A line beneath Copper Canyon Road can be planned around fine sandy loam at the surface and sandy clay deeper down.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I price a Lantana bore near CPKC (Kansas City Southern)?
Start with an address or map pin, especially for a route near FM 407, Poindexter Branch or CPKC (Kansas City Southern), since the exact crossing changes the plan. Tell us what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us review the route, access and likely pits before discussing the work.
The scope sets the price. A short route through Callisburg fine sandy loam may be simpler to plan than one through the sandy clay mapped at about 40 inches or weathered bedrock. Pipe size, bore length, utilities to expose, pavement, drainage crossings and pit or excavator needs also matter. FM 407 permits or a CPKC (Kansas City Southern) crossing agreement add coordination, and the 189 road miles from Yukon affect mobilization.
Questions people ask about boring in Lantana
Does Trinity Boring Solutions take directional boring work in Lantana, Denton County?
Yes. We take directional boring work in Lantana, and our crews are supported by partner contractor satellite yards rather than a local office. The main office is in Yukon, Oklahoma. For a line beneath FM 407 or a route along Lantana Trail, you deal with Trinity from the first call through the bore log.
Does Callisburg soil in Lantana create a steel corrosion concern, and what pipe can be used?
The USDA soil survey maps high steel corrosion risk across 77 percent of Lantana, so steel casing and tracer wire need consideration. HDPE is not affected by that soil corrosion concern. The line owner selects any coating for steel, and the site and line design determine the appropriate material near streets such as Copper Canyon Road.
What ground does a bore pass through in Lantana’s Callisburg soil?
Callisburg is the most common mapped soil series in Lantana, covering 46 percent of the area. Fine sandy loam is the leading surface texture, while sandy clay is mapped across 46 percent at about 40 inches. Those USDA soil survey patterns are not test borings, so the route near Lantana Trail still guides the field plan.
Is rock mapped beneath Lantana, and how shallow is it?
Weathered bedrock is mapped within 60 inches across 19 percent of Lantana, with a typical mapped depth of 31 inches. Hard bedrock is not mapped within that depth range. The Woodbine Formation is described as sandstone and mudstone, so a route near Poindexter Branch may need careful steering where ground conditions change.
Who approves a bore under FM 407 in Lantana?
TxDOT’s Dallas District reviews work in the FM 407 right of way. The utility that owns the line files the application through TxDOT’s RULIS system, while we provide the bore plan and profile and work under the issued permit. Local Lantana streets are under county or state authority because the community has no city government.
What does a bore beneath CPKC (Kansas City Southern) track near Lantana require?
A crossing beneath CPKC (Kansas City Southern) track needs an agreement with the railroad owner. That agreement sets requirements such as casing, depth and flagging. The track is 0.3 miles from Lantana’s mapped boundary, so its exact location matters when planning a route that also approaches FM 407.
How far is Lantana from Yukon, and does Flower Mound affect the job?
Lantana is 189 road miles and a 3.8 hour drive from our Yukon, Oklahoma main office. Flower Mound is 3.9 miles south of Lantana, but mobilization is based on the job location and scope, not that nearby city. A route near Copper Canyon can have different access and crossing needs from one near FM 407.
How much Texas811 notice does a bore along Lantana Trail in Lantana need?
Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If work along Lantana Trail slips more than 14 days past the original notice, submit a new request. Marks that are moved or worn off must be refreshed through Texas811 before work continues.
What affects the cost of directional boring near FM 407 in Lantana?
The route length, pipe or conduit size, ground, exposed utilities, pavement, pits and drainage crossings all affect the scope. Sandy clay at about 40 inches can take a different plan from fine sandy loam, and FM 407 adds permit coordination. A bore near Poindexter Branch or 189 road miles from Yukon may also change the work and mobilization.
Where the Lantana facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Lantana
- U.S. Census Bureau, TIGER/Line 2024: Lantana boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Lantana population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Lantana housing units and year built
- Macrostrat geologic map compilation: map units under Lantana
- U.S. Department of Transportation, North American Rail Network: track owners in Denton County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Denton County
- U.S. Geological Survey, Elevation Point Query Service: Lantana elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Lantana
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Lantana
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Lantana, Texas
Type the address of your job in Lantana. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Lantana
Same county: Denton · Lewisville · Frisco · Carrollton · Little Elm · The Colony · Dallas · Corinth · Fort Worth · Trophy Club · Roanoke · Northlake. All counties: Texas county list.
