trinityboringsolutions.com

Lasara Texas Directional Boring: Delfina Soil, FM 1015 And Main Branch Northeast Canal

Quick Answer: From our Yukon, Oklahoma main office, Lasara is 691 road miles away, and we take directional boring, also called horizontal directional drilling (HDD), for routes near Main Branch Northeast Canal. We staff Lasara work with our own crews and vetted partner contractor satellite yards, not a local base. Delfina soil is common around Lasara, and fine sandy loam over sandy clay loam can loosen around a bore, so staged reaming helps hold the path. FM 1015 crossings may need a TxDOT utility permit filed by the line owner.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Lasara bores at a glance

  • Unincorporated community in Willacy County, Texas. Population 909 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 691 miles, about 13.6 hours of driving.
  • Ground: Delfina soil is mapped on 47 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 1015 and FM 490. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Main Branch Northeast Canal and Salt Lake Drain.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near FM 1015 in Lasara?

We handle directional boring in Lasara, Willacy County, 691 road miles from our Yukon yard, with our own crews or vetted partner contractor satellite yards. The Census Bureau counted 909 residents in 2020. We install water, sewer, gas, electric conduit and fiber, including lines routed along streets such as 1st Street or near FM 1015.

Our main office is in Yukon, Oklahoma, and Lasara work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our record includes no utility strike in over 25 years, a standard we apply when planning around FM 1015 and marked lines. Our family business began in 1965, and we have done directional boring since 1982, planning around Cemetery Road when a Lasara crossing is proposed.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does Lasara have around Delfina soil?

The USDA soil survey maps Delfina across 47% of Lasara, with Hargill at 29% and Racombes at 19%. At about 40 inches below the surface, sandy clay loam covers 96% of the mapped area and clay covers 4%. Near the surface, the survey maps 76% fine sandy loam and 21% sandy clay loam. We use Delfina, Hargill, and Racombes soil maps as planning context, not as substitutes for test borings along FM 1015. The sandier upper material can be easier to cut but may need staged reaming to keep the hole stable.

USDA soil survey, inside the Lasara mapped community boundaryWhat is mapped
Soil series mappedDelfina 47 percent, Hargill 29 percent and Racombes 19 percent
Texture at the surfacefine sandy loam 76 percent and sandy clay loam 21 percent
Texture about 40 inches downsandy clay loam 96 percent and clay 4 percent
Engineering class about 40 inches downclayey sand (SC) 76 percent, lean clay (CL) 19 percent and fat clay (CH) 4 percent
Average clay content about 40 inches down28 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches70 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel70 percent of the area

Bedrock is not mapped in Lasara’s top five feet, though the geologic map shows Goliad Formation, Miocene, and Goliad Formation, undivided, Cenozoic; deeper rock is not ruled out. A seasonal water table is mapped within 60 inches across 70% of the area, so pits may need pumping. For crossings near Salt Lake Drain, we do not map flood prone soils in Lasara planning. High steel corrosion risk covers 70% of the mapped area, so the line owner should consider casing and tracer wire materials. We account for Lasara’s fine sandy loam when selecting HDPE, which does not share that soil corrosion concern.

What does it take to bore Lasara sandy clay loam?

We plan a Lasara bore around the sandy clay loam mapped below the surface and the seasonal water table. On a route near FM 1015, staged reaming and steady tracking help us manage the changing ground.

  1. We review the route near FM 1015 and locate marked utilities before drilling; paint shows position, so each marked line on the path is exposed by hydrovac.
  2. Delfina fine sandy loam and sandy clay loam mapped below it call for staged reaming, with the pipe ready before the final pass.
  3. With a seasonal water table mapped within 60 inches across much of Lasara, we keep pits small and pump water if they fill.
  4. We track the drill head from the surface and log depth and pitch along the Main Branch Northeast Canal route.
6 inch PVC sleeve coming out of the bore pit wall in red sandy soil with the Trinity water trailer behind, northeast Oklahoma City
A 6 inch PVC sleeve coming out of the bore pit wall in red sandy soil in northeast Oklahoma City.

What does a bore have to cross in Lasara near Main Branch Northeast Canal?

FM 1015 and FM 490 run inside the mapped Lasara community boundary, and Texas State Highway 186 lies 0.5 miles outside it. A route beneath FM 1015 needs enough cover and a TxDOT utility permit if it occupies highway right of way. Lasara’s longest named streets include Cemetery Road at 1.13 miles, 6th Street and Goyo Garcia Road at 1.05 miles, and 1st Street at 1.05 miles. Those streets give a route planner a local reference for locating pits and avoiding pavement cuts.

CrossingTypeMapped extentWho has a say
FM 1015State highway1 roadway miles insideState highway office
FM 490State highway0.3 roadway miles insideState highway office
Texas State Highway 186Highway nearby0.5 miles outsideState highway office
Main Branch Northeast CanalStream0.85 channel miles insideChecked for Corps of Engineers jurisdiction
Salt Lake DrainStream0.77 channel miles insideChecked for Corps of Engineers jurisdiction
West Main DrainStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Harbin ReservoirLake or pond29 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Lasara or within one mile outside the community boundary, so no local track crossing is identified. Main Branch Northeast Canal runs 0.85 channel miles inside the boundary, and Salt Lake Drain runs 0.77 channel miles. Three mapped street crossings intersect named streams. Harbin Reservoir, a 29 acre pond, is outside the boundary but within one mile. A canal or drain crossing needs route planning, and water crossings are checked for Corps jurisdiction.

Whose permission does Lasara work in Willacy County need?

Lasara has no city government, so street authority rests with Willacy County or the state, depending on the road. FM 1015 and FM 490 are state highways, and work in their right of way needs a TxDOT utility permit. The utility owner applies through RULIS, with the TxDOT Pharr District reviewing it; we prepare the bore plan and profile for the owner. At an FM 1015 crossing, the required cover depth depends on the line type, and TxDOT can set another depth in its permit. The Main Branch Northeast Canal route also needs a jurisdiction check during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are reported in Willacy County near Lasara?

The water provider for a specific Lasara address must be confirmed with Willacy County or the local water district before a bore is planned; the available records do not match a provider to the community. AEP Texas Central and Magic Valley Electric Cooperative report electric service in Willacy County. Those records do not identify the owner at every address, so we confirm the line owner before planning an electric conduit bore along a street such as 9th Street.

Line ownerWhat it isSourceSize
AEP Texas Central and Magic Valley Electric CooperativeElectric utilities reporting service in Willacy CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Lasara’s median housing year is 1992 in the American Community Survey 2019 to 2023 five year estimates, useful context when planning underground work. The survey estimates 6% of homes were built before 1960, 53% from 1960 to 1999, and 41% in 2000 or later. A bore near 1st Street may serve a new connection or replace older pipe. Before drilling close to a marked utility, we hydrovac pothole it; paint shows the line’s position, not its depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Do you cover Lasara and Ranchette Estates?

Lasara is an unincorporated community in Willacy County, at an elevation of 48 feet and with a land area of 1.44 square miles. We use ZIP codes 78580 and 78561 to confirm service area details before planning a crossing along 6th Street / Goyo Garcia Road. Ranchette Estates is 5.5 miles east, Hargill is 6.7 miles west, and Monte Alto is 7.3 miles southwest. Raymondville, the county seat and nearest larger city, is 8.1 miles east. From our Yukon yard, Lasara is 691 road miles and a 13.6 hour drive, which affects mobilization planning for work near Cemetery Road or FM 1015.

Places near Lasara

Which jobs call for a bore along Lasara Cemetery Road?

  • Highway crossing: A bore beneath FM 1015 can carry water or conduit without cutting through the existing highway pavement.
  • Street service: A water or sewer line can reach a property near 1st Street while leaving the street surface intact.
  • Fiber route: Conduit along Cemetery Road can connect service without an open cut across the road.
  • Canal crossing: A Main Branch Northeast Canal bore needs a planned path and a jurisdiction check during planning.
  • Electric conduit: A route near 9th Street starts with confirming which reported electric provider owns the line at that address.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Lasara 9th Street?

For a Lasara quote, give us the address or map pin, what will go underground, the pipe or conduit size, and the footage. For example, tell us whether a route near 9th Street is for water, sewer, electric conduit, gas or fiber. A sketch or plans help us see the route, access and crossings before we set the scope.

A short route through the mapped Delfina soil with clear access may be simpler to plan than a bore with several utility crossings or pavement. The sandy clay loam below the surface, a Main Branch Northeast Canal crossing, and the distance from Yukon can all affect the work. Pipe size, bore length, concrete or pavement, exposed utilities, pits, sand backfill and excavator time also shape the scope. An FM 1015 route or emergency work can add planning demands.

Questions people ask about boring in Lasara

Does Trinity Boring Solutions take jobs in Lasara, Willacy County, and who staffs them?

Yes, we take directional boring work in Lasara, Willacy County. Our own crews and satellite yards run by partner drilling contractors we have vetted can staff the work. You work with Trinity from the first call through the bore log, including on a route near FM 1015.

Will a bore near FM 490 in Lasara hit rock?

Rock is not mapped in the top five feet of Lasara, but that does not rule out deeper rock. The geologic map shows Goliad Formation units that include clay, sand, sandstone and other materials. A route near Cemetery Road still needs site specific planning rather than an assumption that the ground stays uniform.

Who approves a bore under FM 1015 in Lasara?

For work in FM 1015 right of way, the utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT Pharr District reviews it. We prepare the bore plan and profile for the owner. The permit sets the required cover for the line crossing.

Can a line be bored under Main Branch Northeast Canal in Lasara?

A line can be planned beneath Main Branch Northeast Canal, which runs 0.85 channel miles inside the mapped community boundary. For a Main Branch Northeast Canal crossing, we check US Army Corps of Engineers jurisdiction during planning. The route also needs to account for the mapped water table and nearby marked utilities.

Which electric company owns a line at my Lasara, Willacy County address?

AEP Texas Central and Magic Valley Electric Cooperative report electric service in Willacy County, but those records do not identify the owner at every Lasara address. Confirm the line owner before planning conduit near 9th Street, and check the owner’s conduit specifications before the bore is laid out.

Who is responsible for 1st Street in Lasara, and does it have to be cut?

Lasara is unincorporated and has no city government, so Willacy County or the state has authority depending on the road. A bore under 1st Street can avoid an open cut through the street, subject to the route and any applicable permit. The utility owner and road authority should be identified during planning.

How much notice does Texas811 need before a bore on Cemetery Road in Lasara?

For a Cemetery Road bore, request a locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a crossing start on FM 490 slips more than 14 days past its original notice, we submit a new request. Before continuing near Johnson Street, we refresh any worn or moved marks through Texas811.

How far is Lasara from the Yukon office, and does Raymondville change the job?

From our Yukon, Oklahoma main office, Lasara is 691 road miles away and a 13.6 hour drive, so we plan logistics accordingly. Raymondville is 8.1 miles east and is the county seat, but that does not remove the longer trip from Yukon for mobilization. Access and the route near FM 490 also help shape the plan.

What affects the cost of a directional bore near FM 1015 in Lasara?

The price depends on the route and work involved, not one local feature alone. Bore length, pipe size, Delfina soil, exposed utilities, pavement, pits and backfill all matter. A Main Branch Northeast Canal crossing or FM 1015 permit planning can add scope, as can mobilization from Yukon or emergency timing.

Where the Lasara facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Lasara

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Lasara, Texas

Type the address of your job in Lasara. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Lasara

Same county: Lyford · Sebastian · San Perlita · Port Mansfield · Zapata Ranch · Santa Monica. All counties: Texas county list.