trinityboringsolutions.com

Port Mansfield Texas Directional Boring: Galveston Fine Sand, Highway 186, Tidal Flat Deposits

Quick Answer: Port Mansfield is an unincorporated community in Willacy County, where county streets and Texas State Highway 186 set who controls a crossing; we take directional boring, also called horizontal directional drilling (HDD), work in Texas. The Yukon main office is 708 road miles away, so a bore at Matagorda Drive has mobilization to plan. Galveston fine sand is mapped across 23 percent of the community, and loose sand needs staged reaming to keep the hole open.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Port Mansfield bores at a glance

  • Unincorporated community in Willacy County, Texas. Population 319 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 708 miles, about 14.1 hours of driving.
  • Ground: Galveston soil is mapped on 23 percent of the area, with fine sand about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 186 and FM 606. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: none mapped.
  • Public water: Port Mansfield Public Utility District, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone handle directional boring on Matagorda Drive in Port Mansfield?

We take directional boring work in Port Mansfield, including routes along Matagorda Drive and Port Road where water, sewer, gas, electric conduit or fiber may need a buried crossing. Port Mansfield is an unincorporated community in Willacy County, so county streets are not controlled by a city government. The 2020 Census counted 319 residents; the Census Bureau does not publish yearly estimates for unincorporated places.

Our main office is in Yukon, Oklahoma, and Port Mansfield work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa; a Port Mansfield route along Bayshore Drive is more likely to involve a shorter service or conduit crossing through sand and wet ground.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

How does Galveston soil affect drilling in Port Mansfield?

The USDA soil survey maps Galveston soil across 23 percent of Port Mansfield, with Arrada covering 19 percent and Sauz 18 percent. Mapped surface textures include fine sand across 34 percent of the area and sandy clay loam across 25 percent. At about 40 inches below the surface, the survey maps 59 percent of the area as sandy, with average clay content of 17 percent. For planning near Port Mansfield, we treat Galveston soil mapping as a guide, not a substitute for test borings. Sand cuts readily but can cave behind the drill, while clay can cling to the reamer and grip pipe.

USDA soil survey, inside the Port Mansfield mapped community boundaryWhat is mapped
Soil series mappedGalveston 23 percent, Arrada 19 percent, Sauz 18 percent, Barrada 11 percent and Twinpalms 7 percent
Texture at the surfacefine sand 34 percent, sandy clay loam 25 percent and loamy fine sand 18 percent
Texture about 40 inches downfine sand 27 percent, sandy clay loam 26 percent and fine sandy loam 25 percent
Engineering class about 40 inches downclayey sand (SC) 45 percent, sand with silt (SP SM) 23 percent and fat clay (CH) 11 percent
Average clay content about 40 inches down17 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches90 percent of the area
Flood prone soils64 percent of the area
High corrosion risk for uncoated steel61 percent of the area

For a route near Matagorda Drive, the USDA survey does not map bedrock within the top five feet, though that does not rule out rock deeper down. A seasonal water table is mapped within 60 inches across 90 percent of the area, so bore pits may need pumping and wet sand needs careful control. Flood prone soils cover 64 percent, which calls for attention to drainage and depth. High steel corrosion risk is mapped across 61 percent; the geologic map shows Holocene tidal flat deposits of sand, silt, mud and shells.

How do crews bore through fine sand in Port Mansfield?

On Port Mansfield’s mapped fine sand, we drill a guided pilot bore, enlarge it in stages, then pull the prepared line back before loose ground can cave.

  1. Because fine sand is mapped across 34 percent of Port Mansfield, we use drilling fluid to support the bore and enlarge the hole in stages.
  2. With a seasonal water table mapped within 60 inches across 90 percent of the area, we keep pits small and pump water when needed.
  3. At a proposed crossing on Matagorda Drive, we expose every marked utility on the bore path before the drill approaches it; paint does not show depth.
  4. We follow the drill head from the surface and record depth and pitch as a bore advances near Texas State Highway 186.
Bobcat E35 mini excavator lowering a 6 inch PVC sleeve into a bore pit in sandy soil at NE 24th Street in northeast Oklahoma City
Lowering a 6 inch PVC sleeve into a bore pit in sandy soil at NE 24th Street in Oklahoma City.

Which crossings shape a bore in Port Mansfield near Texas State Highway 186?

A Port Mansfield bore may run beneath Texas State Highway 186, FM 606 or local streets, so the route determines whether the crossing is controlled by the state or county. The mapped community contains 2.1 roadway miles of Texas State Highway 186 and 0.7 miles of FM 606. Among named streets, Matagorda Drive runs 1.66 miles, Port Road 1.0 mile and Bayshore Drive 0.74 miles. For a highway crossing, boring keeps existing pavement intact; the pits sit on either side of the route.

CrossingTypeMapped extentWho has a say
Texas State Highway 186State highway2.1 roadway miles insideState highway office
FM 606State highway0.7 roadway miles insideState highway office
Swipe the table sideways to see every column.

Railroad tracks are not mapped inside Port Mansfield or within 1 mile, and no street and rail crossings are mapped in the community. No streams are mapped inside or within 1 mile, and no lakes or ponds are mapped within 1 mile. The community does have 1.32 miles of unnamed drainage, so a route near that drainage needs a site check rather than an assumption that it is a named stream crossing.

Who signs off on Port Mansfield work in Willacy County?

Port Mansfield has no city government, so work on county streets such as Matagorda Drive is handled at county level; on Texas State Highway 186 or FM 606 right of way, the line owner, not Trinity, files the utility permit through TxDOT’s RULIS system. The TxDOT Pharr District reviews the application, and we prepare the bore plan and profile for the owner. At highway crossings, electric and communication lines, water lines and pressurized sewer lines each need 60 inches of cover. Along the right of way, electric and communication lines need 48 inches and water lines 36 inches. TxDOT may set another depth in the permit, and existing highway pavement is bored or tunneled beneath.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What buried lines should we check in Port Mansfield near Port Mansfield Public Utility District?

The Port Mansfield Public Utility District owns the local public water system, which uses purchased surface water and serves 800 people through 663 service connections. A bore near Port Road may meet water infrastructure, but the address and line owner still need confirmation. AEP Texas Central and Magic Valley Electric Cooperative report electric service in Willacy County; that does not identify the provider at every Port Mansfield address, so we confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
Port Mansfield Public Utility DistrictPublic water systemSurface water bought from another system663 connections, 800 people served
AEP Texas Central and Magic Valley Electric CooperativeElectric utilities reporting service in Willacy CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Port Mansfield’s median housing year at 1987; 22 percent of homes were built before 1960, 49 percent from 1960 to 1999 and 29 percent in 2000 or later. That mix can mean replacement routes as well as new services. Along Matagorda Drive, we hydrovac pothole each marked utility on the bore path before drilling nearby. For a proposed line beneath Matagorda Drive, paint shows position, not depth, so exposed lines establish the clearance.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

How far is Port Mansfield from San Perlita and our Yukon yard?

Port Mansfield is an unincorporated community in Willacy County, 3 feet above sea level and covering 4.94 square miles. Its ZIP code is 78598. San Perlita is 13.1 miles west, while Raymondville, the county seat and nearest larger city, is 21.7 miles west. Santa Monica is 16.5 miles southwest, Los Angeles is 21.9 miles west and Lyford is 24.0 miles southwest. From the Yukon yard, the route is 708 road miles and a 14.1 hour drive, which affects mobilization for work near Texas State Highway 186.

Places near Port Mansfield

What boring work might be needed on Bayshore Drive in Port Mansfield?

  • Highway crossing: A route under Texas State Highway 186 is bored below the pavement, with the line owner arranging the right of way permit.
  • Water service: A connection near Port Road may tie into lines associated with the Port Mansfield Public Utility District.
  • Fiber conduit: A run along Bayshore Drive can be installed underground without opening the street surface.
  • Electric conduit: Near Matagorda Drive, the line owner is confirmed before a conduit route is planned.
  • Drainage crossing: A route near the community’s 1.32 miles of unnamed drainage needs a site review for pits and ground conditions.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send to price a bore near Matagorda Drive in Port Mansfield?

For a bore near Matagorda Drive, start with the address or map pin so we can place the route. Tell us what will go underground, such as a water line or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans help show whether the route approaches Texas State Highway 186 or a driveway.

The route and scope determine the price. Fine sand mapped near Matagorda Drive affects drilling and reaming; the line size, footage and utilities to expose also change the work. A crossing of Texas State Highway 186 brings pavement and permit planning into the scope, while pits, excavator time and sand backfill depend on access. Mobilization also reflects the 708 road miles from the Yukon yard. For emergency work in Willacy County, we factor in 708 road miles from the Yukon main office when planning.

Questions people ask about boring in Port Mansfield

Does Trinity take directional boring jobs in Port Mansfield and Willacy County, and who staffs them?

Yes. We take Port Mansfield work with our crews and with partner drilling contractors operating from satellite yards we have vetted. You work with Trinity from the first call through the bore log, regardless of the crew on site. For a route on Matagorda Drive, we plan the work around the address and the line being installed.

Will groundwater or flood prone ground near Galveston soil affect a Port Mansfield bore pit?

It can. The USDA soil survey maps a seasonal water table within 60 inches across 90 percent of Port Mansfield and flood prone soils across 64 percent. Galveston soil is mapped in the community, so a pit near Matagorda Drive may need pumping and wet sand control. We check the actual route before setting pit locations.

Does Galveston soil in Port Mansfield create a steel corrosion concern, and what pipe can be used?

The mapped area has high steel corrosion risk across 61 percent, so the line owner should consider casing and tracer wire materials for a route near Port Road. HDPE is not subject to soil corrosion. The line owner selects any coatings for steel casing or tracer wire based on the line design.

What ground should a bore expect near Galveston soil in Port Mansfield?

The USDA soil survey maps Galveston soil across 23 percent of Port Mansfield and fine sand at the surface across 34 percent. At about 40 inches, the survey maps 59 percent of the area as sandy; the listed soil groups include SC at 45 percent and SP-SM at 23 percent. These mapped patterns guide planning but are not site specific test borings.

Will a Port Mansfield bore hit rock near Texas State Highway 186?

Bedrock is not mapped within the top five feet near Texas State Highway 186, but that does not rule out deeper rock. The geologic map shows Holocene tidal flat deposits made up of sand, silt, mud and shells. A site investigation and the planned bore depth determine what the drill may encounter.

Do we seek TxDOT Pharr District approval for Texas State Highway 186 in Port Mansfield?

The line owner files the TxDOT utility permit through RULIS, and the TxDOT Pharr District reviews it; Trinity prepares the bore plan and profile for that filing. For a crossing of Texas State Highway 186, the permit sets the required conditions and cover depth. Work on a county street such as Matagorda Drive is handled at county level.

Can I reach Trinity after hours for urgent boring near Bayshore Drive in Port Mansfield?

Yes. For questions about boring along Baffin Drive, we have a person answer Trinity’s phone 24 hours a day at (405) 409-7423. For urgent work near Bayshore Drive, have the address or map pin and the line details ready so we can understand the location and scope.

How far ahead should I call Texas811 for a Port Mansfield bore near Matagorda Drive, and what if marks move?

Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. Texas811 describes this as at least two working days. If a Matagorda Drive start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of a directional bore under Texas State Highway 186 in Port Mansfield?

The price reflects the route, length, line size, mapped fine sand, utilities to expose, pavement and pit work. A Texas State Highway 186 crossing adds highway coordination, while wet ground may affect pits and pumping. Mobilization from the Yukon yard also matters because Port Mansfield is 708 road miles away.

Where the Port Mansfield facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Port Mansfield

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Port Mansfield, Texas

Type the address of your job in Port Mansfield. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Port Mansfield

Same county: Sebastian · Lasara · Ranchette Estates · Zapata Ranch. All counties: Texas county list.