trinityboringsolutions.com

Los Angeles Texas Directional Boring: Raymondville Clay Loam, FM 1762, Union Pacific

Quick Answer: FM 1762 is the main route to plan around, and Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Los Angeles, Texas. The Yukon, Oklahoma main office is 683 road miles away, with FM 1762 access shaping mobilization. Raymondville clay loam is sticky ground that can grip a pipe, so staged reaming and a same day pull matter. Union Pacific borders the mapped community, so a rail route needs its own planning.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Los Angeles bores at a glance

  • Unincorporated community in Willacy County, Texas. Population 108 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 683 miles, about 13.4 hours of driving.
  • Ground: Raymondville soil is mapped on 100 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 1762. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near Monterrey Street in Los Angeles?

Trinity Boring Solutions handles directional boring in Los Angeles, an unincorporated community in Willacy County where a route may follow Monterrey Street or Loop Street. The Census Bureau counted 108 residents in 2020; it does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber lines, including service routes along those named streets when the job calls for them.

Our main office is in Yukon, Oklahoma, and Los Angeles work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that began in 1965 and has done directional boring since 1982. With AEP Texas Central and Magic Valley Electric Cooperative reporting service in Willacy County, our record of no utility strike in over 25 years matters wherever buried lines share a route near Monterrey Street.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What does the Raymondville soil survey show in Los Angeles?

The USDA soil survey maps Raymondville soil across Los Angeles as Raymondville clay loam, with clay loam at the surface and clay at about 40 inches. The survey maps heavy clay across the full mapped community area at that depth, with an average clay content of 42 percent. Sandy and gravelly ground are not mapped there at about 40 inches. These are mapped soil patterns, not test borings, so a bore plan still has to account for conditions found along the actual route near FM 1762.

USDA soil survey, inside the Los Angeles mapped community boundaryWhat is mapped
Soil series mappedRaymondville 100 percent
Texture at the surfaceclay loam 100 percent
Texture about 40 inches downclay 100 percent
Engineering class about 40 inches downlean clay (CL) 100 percent
Average clay content about 40 inches down42 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

For Raymondville soil, the survey does not map bedrock in the top five feet, but that does not rule out rock deeper down. Seasonal water table and flood prone soils are not mapped in Los Angeles, which reduces those mapped concerns for pits and channel planning. High steel corrosion risk covers the mapped area, so the line owner should consider casing and tracer wire materials; HDPE avoids the steel corrosion concern. The geologic map identifies the Cenozoic Beaumont Formation, mostly mud and clay, which fits the need to manage sticky returns.

How do we bore through clay in Los Angeles?

For Los Angeles clay loam, we keep fluid pressure controlled and manage the sticky cuttings as the bore advances. The Raymondville soil survey guides the plan, while field conditions set the final approach.

  1. We use thinner drilling fluid and polymer in Raymondville clay loam, then ream in stages to limit sticky cuttings on the tool.
  2. Because the mapped soil is heavy clay at about 40 inches, we watch fluid returns closely to avoid pressure lifting pavement near FM 1762.
  3. We have the pipe ready before the final ream and pull it the same day the hole opens, since Los Angeles clay can grip pipe.
  4. Near Monterrey Street, we expose marked utilities with hydrovac before drilling close, then track the head and log its depth and pitch.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Where might a Los Angeles bore pass beneath FM 1762?

FM 1762 is the state highway route inside Los Angeles, with 1.3 mapped roadway miles in the community, so a bore that enters its right of way needs TxDOT coordination. US 77 Business runs along or touches the mapped boundary, while Interstate 69E and US 77 are each 0.7 miles away and Texas State Highway 186 is 0.8 miles away. Monterrey Street is the longest named street at 0.21 miles, followed by Loop Street at 0.15 miles. The mapped community has 1.91 public road centerline miles in all.

CrossingTypeMapped extentWho has a say
FM 1762State highway1.3 roadway miles insideState highway office
US 77 BusinessHighway nearbyRuns along or touches the city limitsState highway office
Interstate 69EHighway nearby0.7 miles outsideState highway office
US 77Highway nearby0.7 miles outsideState highway office
Texas State Highway 186Highway nearby0.8 miles outsideState highway office
Union PacificRailroad nearby0 miles outsideThe railroad
Swipe the table sideways to see every column.

Union Pacific runs along or touches the Los Angeles boundary, but no street and rail crossing is mapped inside the community. A planned bore toward that track still needs railroad coordination with Union Pacific. No named streams or lakes and ponds are mapped in or within one mile of Los Angeles; the mapped street crossings of named streams are also none. The community has 0.24 miles of unnamed drainage, so a route near that drainage should be checked against the actual ground and plan.

Who approves a bore near Willacy County roads in Los Angeles?

Los Angeles has no city government, so its public streets fall under county or state authority rather than a city department. For work in the FM 1762 right of way, the line owner, not the driller, files the utility permit through TxDOT’s RULIS system, and the TxDOT Pharr District reviews it; we prepare the bore plan and profile for that filing. TxDOT rules require highway lines to be bored or tunneled beneath existing pavement. A Union Pacific track crossing needs an agreement with the railroad, and any water crossing is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities may have lines in Willacy County near Los Angeles?

The water provider for a specific Los Angeles address must be confirmed with the county or the local water district before we plan a bore. AEP Texas Central and Magic Valley Electric Cooperative report electric service in Willacy County, but that does not establish which company owns lines at every address near Monterrey Street. We confirm the electric line owner before planning a conduit bore so the conduit size and route can be coordinated with the right owner.

Line ownerWhat it isSourceSize
AEP Texas Central and Magic Valley Electric CooperativeElectric utilities reporting service in Willacy CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median housing year in Los Angeles at 1968; 60 percent of housing units date from 1960 to 1999 and 40 percent from 2000 or later. That mix can mean either replacement work or new service along Loop Street. Before drilling near marked lines, we use hydrovac potholing to expose them because paint does not show depth, a useful check on a street with buried services.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Where is Los Angeles near Ranchette Estates?

Los Angeles is a 0.15 square mile census designated place in Willacy County, at an elevation of 31 feet, and its ZIP code is 78580. Raymondville, the county seat and nearest larger place, is 1.4 miles south; Ranchette Estates is 2.3 miles west. Lyford is 5.5 miles south, Lasara is 7.9 miles west and San Perlita is 9.1 miles east. From our Yukon yard, the route is 683 road miles and a 13.4 hour drive, which affects mobilization for work near FM 1762.

Places near Los Angeles

What would we bore near Monterrey Street in Los Angeles?

  • Water service: A service bore along Loop Street can carry water beneath pavement without opening a trench through the street.
  • Highway crossing: A route beneath FM 1762 needs a bore plan for TxDOT review and work under the utility owner’s permit.
  • Electric conduit: Along Monterrey Street, we confirm the line owner and conduit specifications before planning the bore route.
  • Fiber route: A fiber conduit run near US 77 Business can be planned to avoid open cuts across paved access.
  • Rail crossing: A route under the Union Pacific track needs an agreement with the railroad before the crossing plan is set.
  • Drainage route: A bore near Los Angeles’s unnamed drainage needs a route check to keep pits and equipment clear of the channel.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Los Angeles bore near Union Pacific?

For a Los Angeles quote, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage. A plan or sketch helps show whether the route follows Monterrey Street, reaches FM 1762 or approaches the Union Pacific boundary. Those details let us review the route, access and likely crossings before we scope the bore.

Raymondville clay loam is the first cost factor because sticky clay can load a reamer and grip the pipe, making staged passes and fluid control important. Next, the route matters: work near FM 1762 can involve highway permitting, while a Union Pacific crossing needs railroad coordination. Pipe size and length, utilities to expose, pavement or concrete, pits and excavator time also shape the job. At 683 road miles from Yukon, mobilization is another factor for Los Angeles work.

Questions people ask about boring in Los Angeles

Does Trinity take directional boring work in Los Angeles, Willacy County, and how are crews assigned?

Yes, Trinity takes directional boring work in Los Angeles, Willacy County, and handles the job from planning through the bore log. We staff the work with our own crews or partner contractor crews from vetted satellite yards, depending on the job. Our Yukon main office remains your point of contact even when a partner crew is on site near FM 1762.

Who owns the track beside Los Angeles, and what is needed to bore under Union Pacific?

Union Pacific owns the track that runs along or touches the Los Angeles boundary. A bore beneath it requires an agreement from Union Pacific, which sets the crossing conditions such as casing, depth and flagging. If the route also uses highway right of way near FM 1762, TxDOT needs the railroad agreement copy as part of its review.

Which electric company serves my Los Angeles address in Willacy County, and who confirms conduit specs?

AEP Texas Central and Magic Valley Electric Cooperative report electric service in Willacy County, but those records do not identify the owner at each Los Angeles address. We confirm the line owner for the specific route before planning a conduit bore near Monterrey Street. That owner can confirm conduit specifications and coordinate the work around its existing lines.

Who controls Loop Street in Los Angeles, and can a bore avoid cutting it?

Los Angeles is unincorporated and has no city government, so Loop Street is not controlled by a city street department. A directional bore can pass beneath pavement without an open cut, subject to the route and approvals that apply. For a Loop Street job, we plan entry and exit pits in suitable ground beside the crossing.

How old are homes and buried lines near Loop Street in Los Angeles, and does that affect replacement bores?

The American Community Survey 2019 to 2023 estimates put the median housing year in Los Angeles at 1968, with 60 percent built from 1960 to 1999 and 40 percent in 2000 or later. That age mix can point to either replacement lines or new services near Loop Street. We expose marked utilities before drilling near them so a replacement route can be checked against what is already buried.

Does Raymondville soil in Los Angeles corrode steel, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk across Los Angeles, including Raymondville soil. The line owner should consider suitable protection for steel casing or tracer wire; HDPE is not subject to that soil corrosion concern. The survey is a mapped pattern rather than a test of the exact ground along a proposed bore near FM 1762.

What bore sizes and lengths can Trinity handle in Willacy County near Los Angeles?

Trinity handles lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. For a Los Angeles route near Monterrey Street or FM 1762, the pipe size, footage and ground conditions help determine the equipment and plan. We also offer auger boring and hydrovac potholing for related work.

How early do I call Texas811 for a bore on Monterrey Street in Los Angeles, and what if marks move?

For a bore on Monterrey Street, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start slips more than 14 days past the original notice, submit a new request. Marks that wear off or move must be refreshed through Texas811 before work continues.

What affects the price of a directional bore near FM 1762 in Los Angeles?

The main factors are length, pipe or conduit size, Raymondville clay conditions and the utilities that must be exposed along the route. Work beneath FM 1762 can add permit planning, while concrete or pavement, pits, excavator time and backfill also affect the scope. A Union Pacific crossing and mobilization from Yukon can further change what the job requires.

Where the Los Angeles facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Los Angeles

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Los Angeles, Texas

Type the address of your job in Los Angeles. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Los Angeles

Same county: Sebastian · Port Mansfield · Zapata Ranch · Santa Monica. All counties: Texas county list.