San Perlita Texas Directional Boring: Racombes Soil, FM 2209 and East Main Drain
Quick Answer: Along FM 2209 and nearby streets, Trinity Boring Solutions takes directional boring work in San Perlita, also called horizontal directional drilling (HDD). San Perlita is 690 road miles from our Yukon, Oklahoma main office, so we plan crew travel around work on Seminole and Bay Avenue. Racombes soil is the leading mapped series, and its sandy clay loam can stick to the reamer and grip pipe. We stage reaming for that ground and can bore under Sunset Avenue without cutting the pavement.
San Perlita bores at a glance
- Incorporated city in Willacy County, Texas. Population 543 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 690 miles, about 13.6 hours of driving.
- Ground: Racombes soil is mapped on 54 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 2209 and FM 3142. State permit office: TxDOT Pharr District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring on Seminole in San Perlita?
San Perlita is 690 road miles from our Yukon yard, and we schedule our own crews or vetted partner crews for work near Seminole. The Census Bureau Vintage 2024 estimate puts the city population at 543, all in Willacy County. We install water, sewer, gas, electric conduit and fiber, including service or route bores along Bay Avenue and FM 2209.
Our main office is in Yukon, Oklahoma, and San Perlita work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We handle 3/4 inch service lines through 48 inch casing, from a service connection near Bay Avenue to a large crossing planned around FM 2209. For planning directional boring near Seminole, our family business dates to 1965, and we have done this work since 1982.

What is Racombes soil like to bore through in San Perlita?
The USDA soil survey maps Racombes across 54 percent of San Perlita, with Lozano at 27 percent and Willacy at 13 percent. The leading map unit is Racombes sandy clay loam, and the mapped texture at about 40 inches is sandy clay loam across 94 percent of the area, with clay across 6 percent. Average clay content at that depth is 27 percent. These are mapped patterns, not test borings, but they suggest a hole that can hold while sticky cuttings collect on the reamer.
| USDA soil survey, inside the San Perlita city limits | What is mapped |
|---|---|
| Soil series mapped | Racombes 54 percent, Lozano 27 percent and Willacy 13 percent |
| Texture at the surface | sandy clay loam 56 percent and fine sandy loam 41 percent |
| Texture about 40 inches down | sandy clay loam 94 percent and clay 6 percent |
| Engineering class about 40 inches down | lean clay (CL) 95 percent and fat clay (CH) 3 percent |
| Average clay content about 40 inches down | 27 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 85 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 87 percent of the area |
The USDA soil survey maps a seasonal water table within 60 inches across 85 percent of San Perlita, so pits near Bay Avenue may need pumping and a compact layout. High steel corrosion risk is mapped across 87 percent, which makes casing and tracer wire material worth reviewing with the line owner; HDPE avoids that soil concern. For work near East Main Drain, we account for mapped Racombes, Lozano and Willacy soils; flood prone soils are not mapped. Near Campbell Boulevard, we plan boring depth knowing bedrock is not mapped in the top five feet. The geologic map shows the Pleistocene Beaumont Formation, undivided, with clay, silt, sand and gravel, so deeper ground can vary.
How do we bore sandy clay loam in San Perlita?
In San Perlita’s sandy clay loam, we manage sticky cuttings and changing moisture rather than treating the route like loose sand. The mapped Racombes ground guides the fluid, reaming and pit plan.
- Racombes sandy clay loam can leave sticky cuttings on the reamer, so we use staged reaming and fluid suited to the mapped clay before pulling pipe.
- With seasonal water table mapped within 40 inches across 30 percent of San Perlita, we keep pits compact and pump water if a Bay Avenue pit fills.
- Before drilling near a marked service on Seminole, we use hydrovac potholing to expose it; paint marks show position, not burial depth.
- We track the head from the surface and log depth and pitch as the bore advances under FM 2209, keeping pavement intact while pits remain in dirt.

What is in the way of a new line near FM 2209 in San Perlita?
FM 2209 and FM 3142 are state highways within San Perlita, with 0.6 roadway miles of FM 2209 and 0.5 of FM 3142 mapped in the city. Texas State Highway 186 is 1.0 mile outside the limits. A bore near either farm to market road needs a route and depth plan that fits its right of way. Seminole and Bay Avenue each extend 1.0 mile in the city, while Sunset Avenue runs 0.77 mile, offering local routes where a bore can avoid open cuts.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 2209 | State highway | 0.6 roadway miles inside | State highway office |
| FM 3142 | State highway | 0.5 roadway miles inside | State highway office |
| Texas State Highway 186 | Highway nearby | 1 miles outside | State highway office |
| East Main Drain | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside San Perlita or within one mile, and no mapped street and rail crossing is identified. No stream runs inside the city limits; East Main Drain is 0.5 mile outside them, with no mapped street crossing of a named stream inside the city. Along FM 2209, we account for the fact that no lakes or ponds are mapped within one mile. If a proposed route reaches East Main Drain, we check for federal waterway jurisdiction during planning rather than assume the drain is on the bore path.
Whose permission does a bore in Willacy County need in San Perlita?
San Perlita is incorporated, so city streets such as Bay Avenue belong to the city, while FM 2209 and FM 3142 are state highways. Work in either highway right of way needs a TxDOT utility permit, reviewed by the TxDOT Pharr District. The utility owner files through TxDOT’s online RULIS system, and we prepare the bore plan and profile for that filing. Electric and communication crossings need 60 inches of cover below the lowest crossed grade; water crossings need 60 inches, and pressurized sewer crossings need 60 inches. If a route reaches East Main Drain, planning checks whether Corps jurisdiction applies.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Willacy County and San Perlita?
The water provider for a specific San Perlita address must be confirmed with the city, Willacy County or the local water district before a bore is planned. EPA drinking water records do not match a system to the town by name, so the address needs checking. AEP Texas Central and Magic Valley Electric Cooperative report electric service in Willacy County. That does not identify the provider at every Bay Avenue address, so we confirm the line owner before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central and Magic Valley Electric Cooperative | Electric utilities reporting service in Willacy County | EIA Form 861 | Confirm the line owner by address |
We use San Perlita’s 1975 median housing year from the American Community Survey 2019 to 2023 five year estimates when planning street boring. We consider San Perlita’s survey estimates when planning underground work: 39 percent of homes predate 1960, 36 percent date from 1960 to 1999 and 25 percent from 2000 onward. Along Seminole, a replacement route may meet older buried services as well as newer connections. We hydrovac expose marked utilities before drilling near them, since surface marks show position but not depth.

Where is San Perlita in relation to Raymondville and our Yukon yard?
San Perlita is in Willacy County, with Raymondville 8.7 miles west as both the county seat and nearest larger city. The city covers 0.52 square miles at an elevation of 20 feet. We confirm San Perlita’s ZIP codes, 78590 and 78580, when coordinating underground work in Willacy County. Los Angeles is 9.1 miles west, Santa Monica is 9.6 miles south, and Lyford is 11.0 miles southwest. From our Yukon, Oklahoma yard, San Perlita is 690 road miles and a 13.6 hour drive, so distance is part of scheduling work near FM 2209.
Places near San Perlita
- Directional boring in Raymondville: 8.7 miles west
- Directional boring in Los Angeles: 9.1 miles west
- Directional boring in Santa Monica: 9.6 miles south
- Directional boring in Lyford: 11 miles southwest
- Directional boring in Ranchette Estates: 11.3 miles west
Which jobs call for a bore near Bay Avenue in San Perlita?
- Water service: A replacement or new service can follow a property route off Bay Avenue, with the specific water provider confirmed before planning.
- Fiber conduit: A fiber route near Seminole can be bored beneath pavement, with marked utilities exposed before the drill approaches.
- Highway crossing: A line crossing FM 2209 needs a TxDOT permit plan for the state highway right of way and required cover.
- Street bore: A route under Sunset Avenue can keep pavement intact, with pits placed in dirt on either side.
- Drainage crossing: If a proposed route reaches East Main Drain, we plan the profile and check for Corps jurisdiction.
- Electric conduit: A route near FM 3142 starts with confirming the line owner, since county electric reporting does not identify every address.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near East Main Drain in San Perlita?
For a San Perlita quote, start with the address or map pin, such as a location on Bay Avenue or a route toward East Main Drain. Tell us what goes in the ground, whether that is a water line or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans help us see where the route meets FM 2209 or existing services.
The price follows the actual San Perlita route. Racombes sandy clay loam and the seasonal water table can affect reaming, fluid and pit work, so ground conditions matter first. We also consider pipe size, length, utilities to expose, pavement on Bay Avenue, and any crossing at FM 2209 or near East Main Drain. Pit excavation, sand backfill, emergency timing and mobilization from our Yukon yard also shape the work.
Questions people ask about boring in San Perlita
Does Trinity take directional boring jobs in San Perlita, Willacy County?
Yes, we take directional boring work in San Perlita and plan staffing with our own crews or partner drilling contractors we have vetted. Our Yukon office remains the main point of contact for a job near Seminole or FM 2209, from the first call through the bore log.
How do San Perlita homes and buried lines near Bay Avenue affect replacement bores?
San Perlita’s median housing year is 1975, and the American Community Survey estimates 39 percent of homes were built before 1960. A replacement bore near Bay Avenue may meet older services alongside newer connections, so we expose marked utilities before drilling close to them.
Can groundwater or flood prone soil affect bore pits near East Main Drain in San Perlita?
Seasonal water is a planning concern in San Perlita: it is mapped within 40 inches across 30 percent of the area and within 60 inches across 85 percent. For work near East Main Drain, we account for mapped Racombes, Lozano and Willacy soils; flood prone soils are not mapped. If work approaches East Main Drain, we plan pit access and check whether federal waterway jurisdiction applies.
Does Racombes soil in San Perlita create a corrosion issue for steel pipe?
The USDA soil survey maps high steel corrosion risk across 87 percent of San Perlita, including areas mapped as Racombes soil. The line owner should review casing and tracer wire material for the route. HDPE avoids this soil corrosion concern, while the owner selects any steel protection.
What ground does a bore go through in San Perlita’s Racombes soil?
Racombes is mapped across 54 percent of San Perlita, and the soil survey maps sandy clay loam across 94 percent of the area at about 40 inches. Average clay content at that depth is 27 percent. That ground can hold an open hole but may leave sticky cuttings on a reamer.
Will a San Perlita bore hit rock below FM 2209?
Bedrock is not mapped in San Perlita’s top five feet, which does not rule out deeper rock along a route below FM 2209. The geologic map identifies the Pleistocene Beaumont Formation, undivided, with clay, silt, sand and gravel. We use the planned profile and site conditions to guide the bore.
Can I reach Trinity after hours about an urgent bore near Sunset Avenue in San Perlita?
Yes, a person answers our phone 24 hours a day for an urgent San Perlita job. Call (405) 409-7423 and give us the Sunset Avenue location, what line needs work and the immediate issue so we can discuss the response.
How much notice does Texas811 need for a San Perlita bore along Seminole?
For a bore along Seminole, the locate request goes to Texas811 at least 48 hours before excavation, not counting Saturdays, Sundays or legal holidays, and no earlier than 14 days before. Along FM 3142, if the start moves more than 14 days past the original notice, we make a new request. Before work continues on 2nd Street, we have worn or moved marks refreshed through Texas811.
What affects the cost of a directional bore near FM 2209 in San Perlita?
The route, length, pipe size, Racombes soil, utilities to expose and pavement all affect a San Perlita bore. A crossing at FM 2209 can add permit and depth planning, while East Main Drain may add drainage review if reached. Pit work, backfill, urgency and travel from Yukon also shape the job scope.
Where the San Perlita facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside San Perlita
- U.S. Census Bureau, TIGER/Line 2024: San Perlita boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: San Perlita
- U.S. Census Bureau, American Community Survey 2019 to 2023: San Perlita housing units and year built
- Macrostrat geologic map compilation: map units under San Perlita
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Willacy County
- U.S. Geological Survey, Elevation Point Query Service: San Perlita elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to San Perlita
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in San Perlita
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in San Perlita, Texas
Type the address of your job in San Perlita. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for San Perlita
Same county: Sebastian · Lasara · Port Mansfield · Zapata Ranch. All counties: Texas county list.
