Sebastian Texas Directional Boring: Racombes Soil, Interstate 69E and Union Pacific
Quick Answer: Sebastian Municipal Utility District owns the public water system, while AEP Texas Central and Magic Valley Electric Cooperative report electric service in Willacy County, so we confirm buried line owners before a bore. We take directional boring, also called horizontal directional drilling (HDD), under Interstate 69E and other Sebastian routes. Sebastian is 694 road miles from our Yukon yard, and the Union Pacific track is one local crossing to plan around. Racombes soil is commonly sandy clay loam, which can cling to tooling and makes staged reaming and fluid control important.
Sebastian bores at a glance
- Unincorporated community in Willacy County, Texas. Population 1,684 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 694 miles, about 13.6 hours of driving.
- Ground: Racombes soil is mapped on 37 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Interstate 69E, US 77, US 77 Business, FM 506 and FM 1018. State permit office: TxDOT Pharr District.
- Railroad track inside the boundary: Union Pacific, with 5 mapped street and rail crossings.
- Public water: Sebastian Municipal Utility District, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring under Interstate 69E in Sebastian?
We take directional boring work in Sebastian, Willacy County, where the Census Bureau counted 1,684 people in 2020. A water, sewer, gas, electric conduit or fiber line may need to run beneath Pauline Road, Interstate 69E or a Union Pacific track, so we plan the route around the existing lines and crossing conditions.
Our main office is in Yukon, Oklahoma, and Sebastian work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business started in 1965 and has done directional boring since 1982. That experience matters beside Sebastian Municipal Utility District water lines and the electric lines reported in Willacy County; we have gone over 25 years without a utility strike.

What kind of ground does Racombes soil mean for Sebastian bores?
Racombes soil is the largest mapped soil series in Sebastian, covering 37 percent of the community. The USDA soil survey maps Racombes sandy clay loam on nearly level slopes, and sandy clay loam accounts for 58 percent of the mapped texture at about 40 inches below the surface. Clay accounts for an average 31 percent at that depth, while no sandy area is mapped there. We treat Sebastian’s mapped soil patterns as planning context, not as test borings for a route. For a bore near Pauline Road, the sticky clay can load onto a reamer and grip pipe, so we plan staged reaming and keep the pullback coordinated with the open hole.
| USDA soil survey, inside the Sebastian mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Racombes 37 percent, Willacy 21 percent, Hidalgo 20 percent, Raymondville 19 percent and Mercedes 3 percent |
| Texture at the surface | sandy clay loam 57 percent, fine sandy loam 21 percent and clay loam 19 percent |
| Texture about 40 inches down | sandy clay loam 58 percent, clay 22 percent and clay loam 20 percent |
| Engineering class about 40 inches down | lean clay (CL) 96 percent and fat clay (CH) 4 percent |
| Average clay content about 40 inches down | 31 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 37 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 59 percent of the area |
Across Sebastian, bedrock is not mapped in the top five feet, so we still plan for possible deeper rock. A seasonal water table is mapped within 60 inches across 37 percent of the area, so pits near Racombes soil may need pumping. Flood prone soils are not mapped in Sebastian, and we still review crossings for site conditions. High steel corrosion risk covers 59 percent of the mapped area, which can affect casing and tracer wire choices; the line owner selects coatings. The geologic map shows Beaumont Formation, undivided, of Pleistocene age, with clay, silt, sand and gravel deposits.
How do we bore Sebastian’s sandy clay loam?
The USDA survey maps sandy clay loam across much of Sebastian, including around Pauline Road. We adjust fluid and reaming to keep the hole stable without forcing pressure against pavement.
- Racombes soil can cling to the reamer, so we use thinner drilling fluid with polymer and open the hole in stages before pulling pipe.
- The mapped seasonal water table near Sebastian can fill an entry pit; we keep pits small and pump water when site conditions call for it.
- At a Pauline Road route, we hydrovac expose every marked utility on the bore path because surface paint does not show burial depth.
- For a Sebastian pavement or driveway crossing, the drill head is tracked from the surface and depth and pitch are logged as the bore advances.

Where does a line have to go under Pauline Road in Sebastian?
Interstate 69E and US 77 each have 2.8 mapped roadway miles inside Sebastian, making highway crossings a key route decision. FM 506 adds 2.4 roadway miles, while Pauline Road and 8th Street are the two longest named local streets at 1.01 and 1.0 miles. A bore beneath pavement can keep the surface intact, but the route and depth must fit the road crossing. County Line Road and Main Street are also local routes where we check access, buried utilities and the space needed for entry and exit pits.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 69E | Interstate | 2.8 roadway miles inside | State highway office |
| US 77 | US highway | 2.8 roadway miles inside | State highway office |
| US 77 Business | US highway | 1.4 roadway miles inside | State highway office |
| FM 506 | State highway | 2.4 roadway miles inside | State highway office |
| FM 1018 | State highway | 0.9 roadway miles inside | State highway office |
| FM 2629 | State highway | 0.6 roadway miles inside | State highway office |
| FM 1834 | State highway | 0.5 roadway miles inside | State highway office |
| Spur 413 | State highway | 0.4 roadway miles inside | State highway office |
| Union Pacific | Railroad | 1.27 track miles inside | The railroad |
Union Pacific owns 1.27 track miles inside Sebastian, and public mapping shows five street and rail crossings in the community. A track crossing needs the railroad’s agreement, which sets the crossing conditions for that route. No named streams or lakes are mapped inside Sebastian, although public records map 0.43 miles of unnamed drainage. No street crossings of named streams are mapped, so the drainage route, rather than a named creek, is the water feature to check.
Who has to sign off on Sebastian work in Willacy County?
For a bore under Interstate 69E, US 77, FM 506 or another state highway in Sebastian, the utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT Pharr District reviews it. Electric and communication lines need 60 inches of cover at highway crossings and 48 inches along the right of way; water lines need 60 inches at crossings and 36 inches along it, while pressurized sewer needs 60 inches at crossings. The permit may set another depth. TxDOT requires boring or tunneling beneath existing highway pavement, so we plan each Sebastian crossing accordingly. Sebastian has no city government, so county streets such as Pauline Road are not city streets. A Union Pacific crossing needs the railroad’s agreement; the unnamed drainage is checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns Sebastian Municipal Utility District lines and other buried utilities?
Sebastian Municipal Utility District owns the public water system, which uses surface water and serves 1,884 people through 769 service connections. A water bore near FM 506 or Main Street should be planned with that system’s existing lines in mind. AEP Texas Central and Magic Valley Electric Cooperative report electric service in Willacy County, but the line owner for a specific Sebastian address must be confirmed before conduit plans are set.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Sebastian Municipal Utility District | Public water system | Surface water | 769 connections, 1,884 people served |
| AEP Texas Central and Magic Valley Electric Cooperative | Electric utilities reporting service in Willacy County | EIA Form 861 | Confirm the line owner by address |
American Community Survey 2019 to 2023 estimates put Sebastian’s median housing year at 1985; 11 percent of homes were built before 1960, 64 percent from 1960 to 1999 and 25 percent in 2000 or later. That mix can mean both replacement work and newer service routes along 8th Street. Before drilling near the water district or electric lines, we use hydrovac potholing to expose marked utilities; paint shows position, not depth.

Where is Sebastian in relation to Zapata Ranch?
Sebastian is an unincorporated community in Willacy County, about 9.1 miles south of county seat Raymondville. It covers 1.67 square miles and sits at an elevation of 39 feet, with ZIP code 78594. Zapata Ranch is 1.9 miles northwest, and Yznaga is 1.6 miles southwest; Lyford is 4.8 miles north. Our Yukon, Oklahoma main office is 694 road miles away, a 13.6 hour drive, so that distance is part of planning mobilization for a bore near Interstate 69E.
Places near Sebastian
- Yznaga: 1.6 miles southwest
- Directional boring in Zapata Ranch: 1.9 miles northwest
- Directional boring in Lyford: 4.8 miles north
- Tierra Bonita: 5.4 miles south
- Directional boring in Santa Rosa: 6.4 miles south
- Directional boring in Primera: 8.9 miles south
What kinds of bores come up near 8th Street in Sebastian?
- Highway crossing: A bore beneath Interstate 69E keeps the roadway surface uncut while the route meets TxDOT cover and permit conditions.
- Water service: A connection near FM 506 needs route planning around Sebastian Municipal Utility District lines and the existing service network.
- Fiber route: A fiber conduit along 8th Street can pass beneath pavement, with marked utilities exposed before drilling approaches them.
- Rail crossing: A route beneath Union Pacific track needs railroad agreement and crossing conditions coordinated before drilling.
- Drainage crossing: An unnamed drainage route in Sebastian calls for checking the alignment and jurisdiction during planning, even without a named stream.
- Street crossing: A bore under Pauline Road avoids an open cut across the road, with pits placed in dirt at each side.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Sebastian bore near Union Pacific?
For a quote near Union Pacific or Pauline Road, send the address or map pin, what will go underground, pipe or conduit size and footage. A sketch or plans help us see how the route relates to Interstate 69E, nearby utilities and the entry and exit pits.
Racombes sandy clay loam makes soil behavior the first cost question because sticky cuttings can call for fluid control and staged reaming. The number of utilities to expose, pipe size and bore length also matter. A crossing under Interstate 69E or Union Pacific adds route and approval coordination, while pavement, drainage, pits, excavator time and sand backfill shape the work. Sebastian’s 694 road miles from Yukon also affect mobilization.
Questions people ask about boring in Sebastian
Does Trinity take directional boring work in Sebastian, Willacy County, and how is it staffed?
Yes. We take Sebastian work with our crews and with partner contractor crews from vetted satellite yards, while Trinity remains the contact from the first call through the bore log. For a route near Interstate 69E, we plan staffing around the job scope and the crossing requirements.
Who approves a Sebastian bore under Interstate 69E?
The utility owner applies for the right of way permit through TxDOT’s RULIS system, and the TxDOT Pharr District reviews work under Interstate 69E in Sebastian. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that utility owner.
What does a Sebastian bore beneath Union Pacific track require?
Union Pacific owns the track mapped inside Sebastian. A crossing requires an agreement from the railroad, which sets the crossing requirements such as casing, depth and flagging. If the route also uses highway right of way near Interstate 69E, TxDOT asks for a copy of the railroad agreement.
Who runs Sebastian’s public water system, and where does its water come from?
Sebastian Municipal Utility District owns the public water system, and its source is surface water. It serves 1,884 people through 769 service connections, so a proposed water bore near Main Street needs to be coordinated with the district’s existing lines.
Which electric companies report service in Willacy County near Sebastian, and who confirms conduit specs?
AEP Texas Central and Magic Valley Electric Cooperative report electric service in Willacy County. We confirm which company owns the line at the specific Sebastian address before planning conduit, including a route along 8th Street; the line owner confirms the applicable conduit specifications.
Who is responsible for Sebastian streets such as County Line Road, and must we cut the road?
Sebastian is unincorporated and has no city government, so County Line Road is not a city street; county streets fall to the county, while state highways are handled by TxDOT. A bore can pass beneath the road without an open cut when the route and approvals allow it.
What bore sizes and lengths can Trinity handle for a job near Main Street in Sebastian?
We handle Sebastian lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. For a Main Street route, the actual size and footage depend on what the line must connect and which utilities or pavement the path crosses.
How much notice does Texas811 need for a Sebastian bore near Pauline Road, and what if marks fade?
For a bore near Pauline Road, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no more than 14 days ahead. If the start slips over 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811 before work resumes.
What affects the cost of directional boring under Interstate 69E in Sebastian?
Racombes sandy clay loam, bore length, line size and the utilities that must be exposed all affect the work. A route beneath Interstate 69E or Union Pacific track adds crossing coordination; pavement, drainage, pits and mobilization from Yukon also shape the quote. Send the site location, line details and plans if available.
Where the Sebastian facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Sebastian
- U.S. Census Bureau, TIGER/Line 2024: Sebastian boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Sebastian population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Sebastian housing units and year built
- Macrostrat geologic map compilation: map units under Sebastian
- U.S. EPA Safe Drinking Water Information System: public water systems serving Sebastian
- U.S. Department of Transportation, North American Rail Network: track owners in Willacy County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Willacy County
- U.S. Geological Survey, Elevation Point Query Service: Sebastian elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Sebastian
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Sebastian
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Sebastian, Texas
Type the address of your job in Sebastian. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Sebastian
Same county: Raymondville · Lasara · San Perlita · Port Mansfield · Ranchette Estates · Los Angeles · Santa Monica. All counties: Texas county list.
