trinityboringsolutions.com

Liberty City Texas Directional Boring: Cuthbert Soil, Interstate 20 And Little Caney Creek

Quick Answer: What does the top five feet look like in Liberty City, and what lies below? The USDA soil survey maps Cuthbert fine sandy loam and sandy clay loam at about 40 inches; bedrock is not mapped in the top five feet. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for routes such as an Interstate 20 crossing. Liberty City is 332 road miles from our Yukon yard, and Little Caney Creek makes the soil profile relevant at creek approaches. Clay can cling to a reamer, so we stage reaming and pull pipe the same day.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Liberty City bores at a glance

  • Unincorporated community in Gregg County, Texas. Population 2,721 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 332 miles, about 6.4 hours of driving.
  • Ground: Cuthbert soil is mapped on 36 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 20, FM 1252, Texas State Highway 135 and FM 2207. State permit office: TxDOT Tyler District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Little Caney Creek and Rocky Creek.
  • Public water: Liberty City Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone handle directional boring in Liberty City along Interstate 20?

We take directional boring work in Liberty City, an unincorporated community in Gregg County with 2,721 people in the 2020 Census count. Water, sewer, gas, electric conduit and fiber lines can run beneath Kilgore Road, Wilkins Road or routes serving homes near Interstate 20. We plan the bore path around the line being installed and the existing utilities along that route.

Our main office is in Yukon, Oklahoma, and Liberty City work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We handle work from 3/4 inch service lines to 48 inch casing, from a small service route near Kilgore Road to a larger crossing at Interstate 20. Our family business started in 1965, and we have done directional boring since 1982, applying that experience to route planning in Gregg County.

Trinity Boring Solutions Ditch Witch JT922 HDD rig and vacuum excavation truck on a commercial bore in Oklahoma City
Our Ditch Witch JT922 drill and vacuum excavation truck on a commercial bore in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Cuthbert soil in Liberty City?

The USDA soil survey maps Cuthbert soil across 36% of Liberty City, mainly as Cuthbert fine sandy loam on 8 to 25 percent slopes. Kirvin very fine sandy loam covers 20%, while Lilbert loamy fine sand covers 18%. About 40 inches below the surface, sandy clay loam is mapped across 66% of the area, and clay across 20%. We treat Cuthbert and Kirvin mapped soil patterns as planning context, not test borings, for potential work near Little Caney Creek. For a bore, the mix points to changing resistance and clay that can build on a reamer.

USDA soil survey, inside the Liberty City mapped community boundaryWhat is mapped
Soil series mappedCuthbert 36 percent, Kirvin 26 percent, Lilbert 18 percent, Bowie 10 percent and Mattex 6 percent
Texture at the surfacefine sandy loam 49 percent, very fine sandy loam 20 percent and loamy fine sand 20 percent
Texture about 40 inches downsandy clay loam 66 percent, clay 20 percent and clay loam 11 percent
Engineering class about 40 inches downclayey sand (SC) 55 percent, lean clay (CL) 22 percent and fat clay (CH) 20 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches18 percent of the area
Flood prone soils8 percent of the area
High corrosion risk for uncoated steel36 percent of the area

Along Texas State Highway 135, we use the map indication that bedrock is not mapped in Liberty City’s top five feet, while allowing for uncertainty. The geologic map names the Queen City Sand unit, of Lutetian age, with sand, siltstone, sandstone and claystone; that map does not establish the depth of rock at a specific bore. Seasonal water tables are mapped within 60 inches across 18%, and flood prone soils across 8%, so creekside pits may need pumping and careful placement. High steel corrosion risk is mapped across 36%, so the line owner should consider casing and tracer wire materials; HDPE is unaffected by that soil corrosion concern.

How do crews bore Liberty City sandy clay loam?

The USDA soil survey maps sandy clay loam at about 40 inches across much of Liberty City. We plan the bore for clay that can cling to tooling and for wet spots near Little Caney Creek.

  1. At Cuthbert fine sandy loam slopes, we track the drill head from the surface and log depth and pitch to keep the planned path controlled.
  2. Where sandy clay loam is mapped at about 40 inches, we use thinner drilling fluid and polymer, then ream in stages to limit clay buildup.
  3. Near the seasonal water table mapped in Liberty City, we keep pits small and pump them as needed so water does not disrupt the work.
  4. At a Little Caney Creek approach, we plan depth beneath the channel and check the crossing for U.S. Army Corps of Engineers jurisdiction.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What does a bore have to cross in Liberty City near Kilgore Road?

Interstate 20 has 2.7 mapped roadway miles inside the Liberty City boundary. FM 1252 has 3.3 miles, Texas State Highway 135 has 3.1 miles, and FM 2207 has 1.6 miles. A route along any of those roads may need a state right of way plan. Kilgore Road is the longest named street, with 3.29 miles inside the community; Wilkins Road has 1.96 miles and Mount Pisgah Road has 1.04 miles. Those street approaches help define where entry and exit pits can fit.

CrossingTypeMapped extentWho has a say
Interstate 20Interstate2.7 roadway miles insideState highway office
FM 1252State highway3.3 roadway miles insideState highway office
Texas State Highway 135State highway3.1 roadway miles insideState highway office
FM 2207State highway1.6 roadway miles insideState highway office
Little Caney CreekStream3.18 channel miles insideChecked for Corps of Engineers jurisdiction
Rocky CreekStream3.04 channel miles insideChecked for Corps of Engineers jurisdiction
Belle CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Prairie CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Peavine CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Sabine RiverStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Liberty City or within one mile outside its boundary, so the mapped community has no street and rail crossing to plan around. Little Caney Creek runs 3.18 channel miles inside the community, and Rocky Creek runs 3.04 miles. Public records map 10 street crossings of named streams, so a route near either creek needs a profile that stays below the channel. The crossing is also checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who has to sign off on Liberty City bores in Gregg County?

Liberty City has no city government, so a street approval belongs to the county or state agency responsible for that road. For Interstate 20, FM 1252, Texas State Highway 135 or FM 2207 right of way work, the utility owner applies for a TxDOT utility permit through RULIS, reviewed by the TxDOT Tyler District. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that utility. At a highway crossing, required cover depends on the line: electric and communication lines need 60 inches below the lowest point of the crossed grade, while water and pressurized sewer lines also need 60 inches. A water line along the right of way needs 36 inches of cover.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the Liberty City Water Supply Corporation lines?

Liberty City Water Supply Corporation uses groundwater wells and reports 2,180 service connections serving 6,540 people. A new line near Kilgore Road still needs its route and connection point checked against the actual system. Southwestern Electric Power, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative report electric service in Gregg County; we confirm the line owner for the specific address before planning an electric conduit bore.

Line ownerWhat it isSourceSize
Liberty City Water Supply CorporationPublic water systemGroundwater wells2,180 connections, 6,540 people served
Southwestern Electric Power, Rusk County Electric Cooperative and Upshur Rural Electric CooperativeElectric utilities reporting service in Gregg CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Liberty City’s median housing year at 1991; 8% of homes date before 1960, 63% from 1960 to 1999 and 29% from 2000 or later. That mix can mean replacement lines as well as new services along Wilkins Road. Before drilling near marked utilities along Kilgore Road, we hydrovac pothole every marked utility on the bore path. For a line beneath Wilkins Road, that means exposing marked lines first because surface paint shows position, not depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

How far is Liberty City from Kilgore and the Yukon yard?

Liberty City is in Gregg County, covers 6.09 square miles and sits at an elevation of 358 feet. We use Liberty City’s ZIP codes 75647 and 75662 to identify the service location before planning underground work in Gregg County. Kilgore is 6.2 miles southeast and Gladewater is 6.3 miles north; Longview, the county seat, is 11.6 miles northeast. The Yukon yard is 332 road miles away, a 6.4 hour drive. That distance is part of mobilization planning for a bore near Interstate 20 or a rural service route in Gregg County.

Places near Liberty City

What boring work comes up around Little Caney Creek in Liberty City?

  • Highway crossing: A bore beneath Interstate 20 keeps the existing pavement and travel lanes uncut, with the route set to the permit requirements.
  • Water service: A connection near Kilgore Road can tie into a route served by Liberty City Water Supply Corporation after the line owner is confirmed.
  • Fiber route: A conduit bore along Wilkins Road can avoid open cuts while marked utilities are exposed before drilling near them.
  • Creek crossing: A route beneath Little Caney Creek needs a planned depth below the channel and a check for federal jurisdiction.
  • Driveway bore: A service near Mount Pisgah Road can pass beneath the driveway surface, with entry and exit pits placed in dirt.
  • State road crossing: A water line beneath FM 1252 needs cover set for the highway crossing and a TxDOT permit filed by its owner.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for Liberty City work near Mount Pisgah Road?

Start with a map pin or street address near Mount Pisgah Road; a precise spot matters where a street route meets a driveway or creek approach. For a proposed crossing of Interstate 20, tell us what will go in the ground, the pipe or conduit size, and the footage. A sketch or plans help us set the path and identify likely crossings in Liberty City.

The price follows the work at the specific Liberty City site. Ground conditions such as Cuthbert soil and sandy clay loam affect drilling and reaming. Crossings at Interstate 20, utilities to expose, or a creek route near Little Caney Creek add planning and field work. Pit size, excavator time, pavement, backfill and pipe size also matter. Mobilization reflects the 332 road miles from Yukon, while emergency timing or a high profile route can change the job’s requirements.

Questions people ask about boring in Liberty City

Does Trinity Boring Solutions take Liberty City jobs in Gregg County, and who staffs them?

Yes. We take directional boring work across Gregg County and staff Liberty City routes with Trinity crews or vetted partner drilling contractors at satellite yards. You work with Trinity from the first call through the bore log, including when a partner crew is working along Kilgore Road.

Does the housing age near Liberty City’s Wilkins Road affect replacement bores?

It can shape the planning, but house age does not identify a buried line’s condition. The American Community Survey 2019 to 2023 estimates give Liberty City a median housing year of 1991. For a replacement bore near Wilkins Road, we plan from the proposed route and expose marked utilities before drilling nearby.

Are bore pits near Liberty City’s Little Caney Creek affected by groundwater or flooding?

They can be. The soil survey maps seasonal water tables within 60 inches across 18% of Liberty City and flood prone soils across 8%. At a Little Caney Creek approach, we plan pits with wet ground in mind, keep them small and pump water if it enters the work area.

Can Cuthbert soil in Liberty City corrode steel casing, and what pipe can be used?

The soil survey maps high steel corrosion risk across 36% of Liberty City, including areas with Cuthbert soil. On FM 2207, the line owner selects any coating for steel casing or tracer wire, and we follow that choice in our boring plan. HDPE is not subject to that soil corrosion concern, but the owner chooses the material for the line.

What ground does a Liberty City bore through Cuthbert soil encounter?

Cuthbert fine sandy loam is mapped across 36% of the community, and sandy clay loam is mapped at about 40 inches across 66%. Those are USDA soil survey patterns, not test borings. Clay can stick to the reamer, so we plan staged reaming for a route through that ground.

Will a Liberty City bore hit rock below the soil?

Near Rocky Creek, we treat the map as showing no bedrock in Liberty City’s top five feet, without ruling out deeper rock. The geologic map identifies the Queen City Sand unit of Lutetian age, described with sandstone, siltstone and claystone. A site specific bore profile still needs to account for the actual ground encountered.

Does Trinity cover Kilgore and rural sites outside Liberty City?

Yes. We take work across Texas, including routes beyond the mapped Liberty City boundary. Kilgore is 6.2 miles southeast of the community, and we can review a proposed address or map pin there or at a rural Gregg County site.

How much Texas811 notice is needed for a Liberty City bore along Kilgore Road?

Before excavation along Kilgore Road, arrange the Texas811 locate request at least 48 hours ahead, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For a TxDOT Tyler District request affecting Liberty City, if the start slips more than 14 days past the original notice, we submit a new request. Before work continues along Mount Pisgah Road, we have worn or moved marks refreshed through Texas811.

What affects the cost of a directional bore in Liberty City near Interstate 20?

The work scope drives the price. Near Interstate 20, pavement and highway crossing requirements can affect the plan; Cuthbert soil affects drilling, and Little Caney Creek may add crossing work. Pipe size, bore length, utilities to expose, pits, backfill and the 332 road miles from Yukon also factor into mobilization and field time.

Where the Liberty City facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Liberty City

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Liberty City, Texas

Type the address of your job in Liberty City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Liberty City

Same county: Longview · Lake Cherokee · Lakeport · Easton. All counties: Texas county list.