Directional Boring Contractors in Gregg County, TX
Trinity Boring Solutions is a directional boring contractor serving Gregg County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Longview, Kilgore, White Oak, Gladewater, Lakeport and Clarksville City. Longview, the county seat, is about 339 road miles southeast of the Trinity main office in Yukon, Oklahoma. Most Gregg County bores go under Interstate 20 and US 259, the Sabine River and Union Pacific track. Call (405) 409-7423 any time.
Free Bore Planner
Plan Your Bore in Gregg County, Texas
Type the address of your job in Gregg County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
What Should You Know Before Boring in Gregg County?
Gregg County covers 273 square miles, has about 126,679 residents and sits in the TxDOT Tyler District.
| County seat | Longview |
|---|---|
| Population | 126,679 (2024 Census estimate), up 1.9% since 2020 |
| Land area | 273 square miles |
| Largest cities and towns | Longview (81,248), Kilgore (10,213), White Oak (6,241), Gladewater (3,797) and Lakeport (992) |
| TxDOT district | TxDOT Tyler District |
| 811 center | Texas811 (call 811), two working days of notice |
| Electric utilities | Southwestern Electric Power, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative |
| Interstate and US highways | Interstate 20, US 259, US 80 and US 271 |
| State Highways | 31, 42, 135, 149, 300 and 322 |
| State loops and spurs | Loop 281, Spur 502, Spur 63 and Loop 485 |
| Rivers | Sabine River |
| Creeks and other streams | Rabbit Creek, Grace Creek, Hawkins Branch, Moody Creek, Peavine Creek, Glade Creek, Prarie Creek and Little Caney Creek |
| Lakes | Lake Cherokee |
| Railroads | Union Pacific and BNSF Railway, about 33 main line miles |
| Average precipitation | 47.8 inches a year (1991 to 2020) |
| New housing units permitted | 194 in 2025 |
| Road distance from Trinity main office | About 339 miles from Yukon, Oklahoma to Longview |
| Trinity insurance | General liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability |
Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.
What Does a Bore Have to Cross in Gregg County?
A bore in Gregg County most often has to cross a highway such as Interstate 20, US 259 or US 80, a stream such as the Sabine River, Rabbit Creek or Grace Creek and Union Pacific or BNSF Railway track. State Highways 31, 42, 135, 149, 300 and 322 also run through the county, along with Loop 281, Spur 502, Spur 63 and Loop 485. The Census map names 19 larger streams in Gregg County, led by the Sabine River, Rabbit Creek, Grace Creek, Hawkins Branch, Moody Creek and Peavine Creek. The rest are Glade Creek, Prarie Creek, Little Caney Creek, Wynns Bayou, Panther Creek, Bighead Creek, Helton Creek, Big Caney Creek, Dutchman Creek, Little Cypress Creek, Harris Creek, Ray Creek and Rocky Creek. Lake Cherokee is the main mapped lake. The federal rail map shows about 33 miles of main line track in Gregg County: Union Pacific about 30 miles and BNSF Railway about 3.

What Is the Ground Like for Directional Boring in Gregg County?
Shallow groundwater is the main thing to plan for in Gregg County: the federal soil survey records a seasonal water table within five feet of the surface on about 46 percent of the county. On wet Gregg County ground the entry and exit pits are kept small and the bore is sealed with drilling fluid. May is the wettest month in Gregg County at 4.7 inches on average and August the driest at 2.7. Gregg County averages 47.8 inches of precipitation a year, so wet weather and water in the pits are planned for.
- Most common soils: Cuthbert (18%), Bowie (18%) and Kirvin (13%).
- Surface texture: most often fine sandy loam (42%) or loam (10%).
- Bedrock within 5 feet: about 7% of the county. Most of it is soft, weathered rock.
- Clay rich layer (35% clay or more) in the top 5 feet: about 43% of the county.
- Sandy layer (70% sand or more) in the top 5 feet: about 17% of the county.
- Seasonal water table within 5 feet: about 46% of the county.
Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Upshur and Gregg Counties, Texas (survey area TX608, version 23, September 8, 2026), through Web Soil Survey. Percentages are shares of mapped county area.
Who Permits a Bore in Gregg County?
The TxDOT Tyler District permits bores under state highways in Gregg County, the Gregg County Commissioners Court handles county roads, and Longview, Kilgore and White Oak each handle their own streets.
- State highways. Interstate 20, US 259, US 80, US 271, the other numbered state routes and the farm to market roads in Gregg County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
- Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
- Railroads. A bore under Union Pacific or BNSF Railway track in Gregg County needs a crossing agreement from the railroad that owns it, which sets the casing, depth and flagging.
- Water crossings. A bore under the Sabine River, Rabbit Creek or Lake Cherokee is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.
Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.
Which Electric Utilities Serve Gregg County?
Southwestern Electric Power, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative serve Gregg County, according to 2025 filings with the U.S. Energy Information Administration. Southwestern Electric Power is an investor owned utility; Rusk County Electric Cooperative and Upshur Rural Electric Cooperative are member owned cooperatives. The owner of the line sets the conduit size, depth and inspection steps, so it is confirmed before a conduit bore in Gregg County is planned. More on electric line boring for electric cooperatives.
How Much New Construction Is There in Gregg County?
Gregg County permitted 194 new housing units in 2025, 186 of them single family homes, according to the Census Bureau Building Permits Survey. The population of Gregg County went from 124,301 in 2020 to 126,679 in 2024, a gain of 1.9 percent. In Gregg County that means steady work on service lines, rural extensions and road crossings.
Which Cities and Towns in Gregg County Does Trinity Serve?
Trinity takes directional boring work in all 8 incorporated places in Gregg County and at sites outside city limits, and Longview is the largest with about 81,248 residents.
| City or town | 2024 population |
|---|---|
| Longview | 81,248 |
| Kilgore | 10,213 |
| White Oak | 6,241 |
| Gladewater | 3,797 |
| Lakeport | 992 |
| Clarksville City | 787 |
| Easton | 482 |
| Warren City | 314 |
Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Gregg County.
Gregg County borders Harrison County, Rusk County, Smith County and Upshur County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Marshall (Harrison), Henderson (Rusk), Tyler (Smith) and Gilmer (Upshur).
Which Directional Boring Services Are Available in Gregg County?
Every Trinity service is available in Gregg County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.
- Road, highway, railroad, creek and river bore crossings, including Interstate 20, US 259 and the Sabine River
- Bores under Union Pacific and BNSF Railway track, built to the railroad boring requirements of the owner
- Drinkable water line boring and sewer force mains in Longview or Kilgore and on rural water systems
- Underground conduit in Southwestern Electric Power and Rusk County Electric Cooperative territory, see electric line boring
- Fiber optic boring for ISPs and broadband builders along Interstate 20
- Municipal boring services for cities such as Longview, Kilgore and White Oak
The free Bore Planner sizes a Gregg County job before you call.
Gregg County Directional Boring FAQs: What Do Customers Ask?
Does Trinity Boring Solutions work in Longview, Texas?
Yes. Trinity Boring Solutions takes work in Longview, Kilgore, White Oak, Gladewater, Lakeport and Clarksville City and the rural parts of Gregg County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.
Who approves a bore under Interstate 20 in Gregg County?
The TxDOT Tyler District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Gregg County Commissioners Court and city streets through the city.
Is there rock in Gregg County?
Not much. The federal soil survey records bedrock within five feet of the surface on about 7 percent of Gregg County. Potholing confirms it on the actual bore path.
Can a line be bored under the Sabine River in Gregg County?
Yes. A drill is steered below the bed of the Sabine River from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.
Which railroads have track in Gregg County?
Union Pacific and BNSF Railway, with about 33 miles of main line track on the federal rail map. Each requires its own crossing agreement before a bore goes under the rails.
Is Trinity insured for work in Gregg County?
Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.
How much does directional boring cost in Gregg County?
We start from a general range based on length and pipe size. Depth, the crossings and the ground set the number, and shallow groundwater is a factor on many Gregg County jobs.
How Do You Get a Bore Quote in Gregg County?
Call (405) 409-7423 any time or send the address in Gregg County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.