trinityboringsolutions.com

Mila Doce Texas Directional Boring: Hidalgo Soil, FM 1015 and Clay Loam

Quick Answer: FM 1015 runs through Mila Doce, and we take directional boring, also called horizontal directional drilling (HDD), jobs for lines that need to pass beneath it. Mile 12, Mile 12 1/2 and Mile 3 Road are among the long local routes in a community with 33.41 miles of public road centerlines. Our Yukon main office is 709 road miles away, so mobilization matters for a bore near FM 1015. USDA maps Raymondville clay loam at 40 inches across 21 percent of the area, where sticky soil can build on a reamer.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Mila Doce bores at a glance

  • Unincorporated community in Hidalgo County, Texas. Population 6,162 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 709 miles, about 13.9 hours of driving.
  • Ground: Hidalgo soil is mapped on 42 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 1015. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near FM 1015 in Mila Doce?

We take directional boring work in Mila Doce, Hidalgo County, where the 2020 Census counted 6,162 people. Along Mile 12, Mile 12 1/2 or FM 1015, a bore could carry water, sewer, gas, electric conduit or fiber without opening the full route. The right line and route depend on the address and what the project needs to connect.

Our main office is in Yukon, Oklahoma, and Mila Doce work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. 1982 is when we began directional boring; four decades of work matter where Hidalgo soil can grip a pipe or load a reamer. Our family business began in 1965, and you deal with Trinity from the first call through the bore log.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Mila Doce ground like to bore through Hidalgo soil?

The USDA soil survey maps Hidalgo soil across 42 percent of Mila Doce, with Raymondville soil at 29 percent and Willacy soil at 21 percent. At the surface, sandy clay loam covers 35 percent, fine sandy loam 30 percent and clay loam 29 percent of the mapped area. About 40 inches down, clay loam is mapped across 71 percent, and average clay content at that depth is 33 percent. These are mapped patterns, not test borings. A bore near Mile 12 1/2 still needs site checks because the mapped texture does not establish the exact conditions along that route.

USDA soil survey, inside the Mila Doce mapped community boundaryWhat is mapped
Soil series mappedHidalgo 42 percent, Raymondville 29 percent, Willacy 21 percent and Mercedes 6 percent
Texture at the surfacesandy clay loam 35 percent, fine sandy loam 30 percent and clay loam 29 percent
Texture about 40 inches downclay loam 71 percent, sandy clay loam 23 percent and clay 6 percent
Engineering class about 40 inches downlean clay (CL) 94 percent and fat clay (CH) 6 percent
Average clay content about 40 inches down33 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches10 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel39 percent of the area

Bedrock is not mapped in the top five feet, though that does not rule out rock deeper down. A seasonal water table within 60 inches is mapped in 10 percent of the area, so pits may need pumping. Flood prone soils are not mapped. High steel corrosion risk is mapped across 39 percent, a consideration for steel casing and tracer wire that the line owner can address through material choices. The geologic map shows stabilized sand dunes of Holocene age; variable sand over clay calls for attention to fluid and hole stability.

How do crews bore Mila Doce clay loam?

Raymondville clay loam is mapped across 21 percent of Mila Doce at the surface, and clay loam dominates at 40 inches. We adjust the reaming plan to the ground found along each street.

  1. With clay loam mapped at 40 inches, we can ream in stages and adjust drilling fluid so sticky soil does not build up on the reamer.
  2. Where stabilized sand dunes meet clay mapped around Mile 12, we watch how the hole holds and keep the next reaming pass matched to the ground.
  3. Seasonal water table mapping in Mila Doce means pits along Mile 3 Road may need to stay small, with pumping available if water enters.
  4. Before a bore near FM 1015, we expose marked utilities with hydrovac; a surface mark shows position, not depth, and the drill head is tracked and logged.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What does a bore have to cross near FM 1015 in Mila Doce?

FM 1015 is the state highway mapped through Mila Doce, with 1.5 roadway miles inside the community boundary. The longer named streets include Mile 12 at 2.52 miles, Mile 12 1/2 at 2.1 miles and Mile 3 Road at 1.49 miles. Mile 4 runs 1.24 miles inside the boundary. A route beneath FM 1015 has different depth and permit planning from a service bore along one of these local streets, and the utility owner needs to set the crossing route before work is laid out.

No railroad is mapped inside Mila Doce or within one mile outside its boundary, so a rail crossing is not part of the mapped local route picture. No named streams or lakes and ponds within one mile are mapped either. The survey does map 3.96 miles of unnamed drainage inside the community, which can affect a route even without a named creek. We check the specific path and access before deciding whether a drainage crossing changes the bore plan.

Do I need a permit to bore in Mila Doce, Hidalgo County?

Mila Doce is an unincorporated census designated place, so it has no city government to permit its local streets. For work in a county road right of way, the county is the relevant local authority; for FM 1015 right of way, the utility owner applies through TxDOT RULIS and the TxDOT Pharr District reviews it. Trinity prepares the bore plan and profile for the utility owner and works under its permit. At FM 1015, electric and communication lines need at least 60 inches of cover below the lowest crossed grade, as do water and pressurized sewer lines; a permit may set another depth.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines at an address in Mila Doce, Hidalgo County?

A public water provider could not be matched to Mila Doce in EPA drinking water records, which do not tie systems to towns in Texas. The water provider for the specific address must be confirmed with Hidalgo County or the local water district before a bore is planned. AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report electric service in Hidalgo County. We confirm the electric line owner at the address before planning a conduit bore.

Line ownerWhat it isSourceSize
AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric CooperativeElectric utilities reporting service in Hidalgo CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Mila Doce housing units at a median year built of 1999. The estimates show 3 percent built before 1960, 51 percent from 1960 to 1999 and 46 percent in 2000 or later. Along Mile 12 or Mile 3 Road, a project may replace an older line or add service to newer housing; the address and route determine which. Before drilling near a marked utility, we use hydrovac potholing to expose it, including water lines and electric conduit.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Do you cover Mila Doce and nearby Weslaco?

Mila Doce is an unincorporated community in Hidalgo County, at an elevation of 67 feet and covering 3.29 square miles. Its ZIP codes are 78570 and 78599, and the 2020 Census counted 6,162 residents. Olivarez is 2.1 miles west, Indian Hills is 2.6 miles east and Weslaco is 4.6 miles south; Weslaco is the nearest larger city. Edinburg, the county seat, is 13.7 miles northwest. The Yukon, Oklahoma main office is 709 road miles away, a 13.9 hour drive, which can affect mobilization for work on Mile 12 or FM 1015.

Places near Mila Doce

What would we bore along Mile 12 1/2 in Mila Doce?

  • Highway crossing: A route under FM 1015 needs a bore plan that accounts for highway cover and the utility owner’s TxDOT permit.
  • Water service: A connection along Mile 12 1/2 needs the address specific water provider confirmed before the route is set.
  • Electric conduit: Near Mile 3 Road, we confirm the line owner before planning conduit and expose marked utilities on the bore path.
  • Fiber route: A run along Mile 12 can use a bore to pass beneath local pavement without cutting the full street route.
  • Drainage crossing: A route near the mapped unnamed drainage on Mile 4 needs a site specific path and pit plan.
  • Sewer line: A service near FM 1015 can be bored beneath pavement, with the route and cover planned for the specific line.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Mila Doce bore near Mile 12?

For a quote, send the Mile 12 address or map pin, what is going underground, the pipe or conduit size and footage; a sketch or plans help. The route matters here because a short service off Mile 12 is different from a crossing of FM 1015 or one of the mapped drainage paths.

A short service along Mile 4 with no highway or drainage crossing is simpler to plan. Clay loam at 40 inches, the number of utilities to expose, pavement or concrete, and the need for pits or sand backfill can add work. A crossing beneath FM 1015 brings highway cover and permit planning into the scope. Creek or drainage crossings can affect the route, and the 709 road miles from Yukon affect mobilization. High profile or emergency work also changes the planning.

Questions people ask about boring in Mila Doce

Does Trinity Boring Solutions take Mila Doce jobs in Hidalgo County, and how are they staffed?

Yes. We take directional boring work in Mila Doce, Hidalgo County. Our own crews and partner drilling contractors Trinity has personally vetted can staff the work, while you deal with Trinity from the first call through the bore log. A route along Mile 12 or beneath FM 1015 is planned around the address and line.

Will a Mila Doce bore hit rock beneath the streets?

The mapped soil information does not show bedrock in the top five feet, but that does not rule out deeper rock. The geologic map identifies stabilized sand dunes of Holocene age, while the USDA survey maps clay loam at 40 inches. Conditions along a specific Mile 4 route still need to be checked.

Who approves a Mila Doce bore under FM 1015?

For work in FM 1015 right of way, the utility owner submits the application through TxDOT RULIS, and the TxDOT Pharr District reviews it. We provide the bore plan and profile for the owner’s application and work under the permit issued to that utility owner. Local streets are not city government streets because Mila Doce is unincorporated.

Which electric company owns a Mila Doce line in Hidalgo County, and who confirms conduit specs?

AEP Texas Central, Oncor Electric Delivery Company and Magic Valley Electric Cooperative report electric service in Hidalgo County, but that does not identify the owner at every address. We confirm the line owner for a specific Mile 12 address before planning a conduit bore, and the owner confirms the conduit specifications.

Who controls Mila Doce streets such as Mile 3 Road, and must a bore cut the pavement?

Mila Doce has no city government, so county roads are handled by the county and FM 1015 is under state jurisdiction. A bore can pass beneath Mile 3 Road without opening the full pavement route. The exact work area and right of way determine which authority is involved.

What do Mila Doce housing ages near Mile 12 1/2 mean for replacement bores?

The American Community Survey 2019 to 2023 estimates give Mila Doce a median housing year of 1999, with 51 percent of units built from 1960 to 1999. A project near Mile 12 1/2 could replace an existing line or serve newer housing; the address and exposed utilities guide that choice. We pothole marked lines before drilling near them.

What bore sizes and lengths can Trinity handle for a Mila Doce job near Mile 4?

We handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. For a Mile 4 project, the needed pipe or conduit size and route length help determine the equipment and plan. Soil conditions and crossings also shape the work.

How much notice does Texas811 need for a Mila Doce bore along Mile 12?

Texas law requires a locate request at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays; Texas811 describes that as at least two working days. The request cannot be made more than 14 days ahead. If a Mile 12 start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

What affects the cost of directional boring under FM 1015 in Mila Doce?

The job details determine the price, including bore length, pipe size, soil, utility exposures, pavement, pits and backfill. Clay loam mapped beneath Mila Doce can affect the reaming plan, while FM 1015 adds highway permit and cover planning. Mobilization also depends on the 709 road miles from the Yukon main office.

Where the Mila Doce facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Mila Doce

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Mila Doce, Texas

Type the address of your job in Mila Doce. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Mila Doce

Same county: McAllen · Edinburg · Mission · Pharr · San Juan · Alton · Alamo · Mercedes · Donna · Palmview · Hidalgo · La Homa. All counties: Texas county list.