trinityboringsolutions.com

Morgan’s Point Resort Texas Directional Boring: Eckrant Soil, FM 2483 and Tanyard Branch

Quick Answer: Along FM 2483, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for lines that need to pass beneath pavement. Morgan’s Point Road is among the streets in a city with 45.65 public road miles, and the Yukon main office is 340 road miles away. Eckrant soil dominates the map, with very cobbly clay at the surface and bedrock commonly close below, so rock can govern the tools and pace. Near Tanyard Branch, a bore can leave the channel bank uncut while the crossing is checked during planning.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Morgan’s Point Resort bores at a glance

  • Incorporated city in Bell County, Texas. Population 4,771 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 340 miles, about 6.6 hours of driving.
  • Ground: Eckrant soil is mapped on 85 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 98 percent of the area.
  • Highways inside the boundary: FM 2483. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Tanyard Branch.
  • Public water: City of Morgan’s Point Resort, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near FM 2483 in Morgan’s Point Resort?

We take directional boring work in Morgan’s Point Resort, Bell County, where the Census Bureau Vintage 2024 estimate puts the population at 4,771. Along FM 2483 or Morgan’s Point Road, we install water, sewer, gas, electric conduit and fiber lines by boring beneath pavement or driveways when the route allows. Each plan depends on the line, access and ground along the proposed path.

Our main office is in Yukon, Oklahoma, and Morgan’s Point Resort work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965 and has drilled directionally since 1982; the range from 3/4 inch service lines to 48 inch casing can fit a service run off Lake Forest Drive or a larger utility route near FM 2483.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Eckrant soil mean for Morgan’s Point Resort bores?

The USDA soil survey maps Eckrant soil across 85 percent of Morgan’s Point Resort, commonly as an Eckrant Rock outcrop complex with very cobbly clay at the surface. At about 40 inches, bedrock is mapped across 92 percent of the area, while silt loam is mapped across 5 percent. The survey does not map sandy ground at that depth. These are mapped patterns, not test borings: on a route along Morgan’s Point Road, the actual mix can change, so the bore plan must allow for shallow rock and clay that can cling to tooling.

USDA soil survey, inside the Morgan’s Point Resort city limitsWhat is mapped
Soil series mappedEckrant 85 percent, Denton 5 percent, Real 4 percent and Purves 4 percent
Texture at the surfacevery cobbly clay 85 percent, silty clay 9 percent and gravelly clay loam 4 percent
Texture about 40 inches downbedrock 92 percent and silt loam 5 percent
Engineering class about 40 inches downlean clay (CL) 5 percent
Average clay content about 40 inches down25 percent
Bedrock mapped within 60 inches98 percent of the area (94 percent hard rock, 4 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel88 percent of the area

Bedrock is mapped within 60 inches across 98 percent of the city, including hard bedrock across 94 percent and weathered bedrock across 4 percent; typical depth is 12 inches. That points to slower drilling and possible tool changes, especially where soil meets rock. Seasonal water table and flood prone soils are not mapped. The soil survey maps high steel corrosion risk across 88 percent, so the line owner should consider protection for steel casing or tracer wire. The geologic map lists undivided parts of the Washita and Fredericksberg Groups, Cretaceous claystone, limestone, shale and marlstone.

How is a bore run through Morgan’s Point Resort bedrock?

Eckrant soil and shallow mapped bedrock call for a route specific plan, not a standard dirt bore. Along FM 2483 or a neighborhood street, we select tooling and fluid for the ground the drill meets.

  1. At an Eckrant soil route, we check the proposed alignment and use staged reaming where sticky clay clings to the tooling, with the pipe ready for the pull.
  2. Where shallow bedrock is mapped near Morgan’s Point Road, we choose tooling for the rock and monitor depth and pitch as the drill advances.
  3. Before approaching marked utilities on Lake Forest Drive, we hydrovac pothole to expose their actual position because surface paint does not show depth.
  4. For a crossing near Tanyard Branch, we plan pits on the banks and review the water crossing before drilling beneath the channel.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

What might a bore cross near Morgan’s Point Road in Morgan’s Point Resort?

FM 2483 runs 0.6 mapped roadway miles inside Morgan’s Point Resort. Texas State Highway 317 and Texas State Highway 36 lie 0.4 and 0.6 miles outside the limits, respectively, so a route that reaches either can involve state right of way. Within the city, Morgan’s Point Road is the longest named street at 2.94 miles, followed by Great W Loop at 1.88 miles and Lake Forest Drive at 1.37 miles. Cottonwood Loop adds another named route where pavement or driveways may shape pit placement.

CrossingTypeMapped extentWho has a say
FM 2483State highway0.6 roadway miles insideState highway office
Texas State Highway 317Highway nearby0.4 miles outsideState highway office
Texas State Highway 36Highway nearby0.6 miles outsideState highway office
Tanyard BranchStream0.58 channel miles insideChecked for Corps of Engineers jurisdiction
Cedar CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Leon RiverStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Bull BranchStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Belton LakeLake or pond12,148 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad runs inside Morgan’s Point Resort or within one mile outside it, and no street and rail crossing is mapped. Tanyard Branch runs 0.58 channel miles in the city, with one mapped street crossing of a named stream. Belton Lake is also inside the limits. A route near Tanyard Branch or the lake needs a water crossing review during planning, and boring can avoid cutting the channel bank when the design and conditions allow.

Do I need a permit for a Morgan’s Point Resort bore in Bell County?

A bore beneath FM 2483 needs depth planned to the applicable TxDOT cover rule: electric and communication lines need 60 inches below the lowest crossed grade, and water lines need 60 inches at a crossing. The utility that owns the line applies through TxDOT’s RULIS system, reviewed here by the TxDOT Waco District; we prepare the bore plan and profile and work under the utility owner’s permit. City streets such as Morgan’s Point Road belong to the incorporated city. A Tanyard Branch crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who runs water service in Morgan’s Point Resort through the City of Morgan’s Point Resort?

The City of Morgan’s Point Resort public water system is locally owned and uses purchased surface water; records list 2,009 service connections and 5,000 people served. County electric service is reported by Oncor Electric Delivery Company, Bartlett Electric Cooperative, Heart of Texas Electric Cooperative and Pedernales Electric Cooperative. Before a conduit bore along Lake Forest Drive, we identify the line owner and expose marked utilities with hydrovac potholing rather than relying on paint for depth.

Line ownerWhat it isSourceSize
City of Morgan’s Point ResortPublic water systemSurface water bought from another system2,009 connections, 5,000 people served
Oncor Electric Delivery Company, Bartlett Electric Cooperative, Heart of Texas Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Bell CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median housing year at 2001; 55 percent of homes were built in 2000 or later and 45 percent from 1960 to 1999. Work along Morgan’s Point Road may involve a new service or replacement near existing lines. We pothole marked utilities before drilling close to them, since surface marks do not show burial depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

How far is Morgan’s Point Resort from Temple and our Yukon office?

Morgan’s Point Resort is in Bell County, covers 3.05 square miles and sits at an elevation of 644 feet; its ZIP code is 76513. Temple is 5.4 miles southeast and is the nearest larger city, while Belton, the county seat, is 7.2 miles south. Pendleton is 8.5 miles east, Troy is 9.8 miles east and Nolanville is 10.3 miles southwest. From our Yukon, Oklahoma main office, the road distance is 340 miles and the drive is 6.6 hours, which factors into mobilization for work near FM 2483.

Places near Morgan’s Point Resort

What boring work comes up along Lake Forest Drive in Morgan’s Point Resort?

  • Highway crossing: A bore beneath FM 2483 needs a route and profile that meet the applicable TxDOT cover and right of way requirements.
  • Water service: A new connection near Lake Forest Drive can be bored from a pit to the City of Morgan’s Point Resort water line.
  • Fiber conduit: Along Morgan’s Point Road, potholes can locate marked utilities before a conduit bore passes through the crowded route.
  • Creek crossing: A Tanyard Branch bore can pass below the channel with pits placed on each side and jurisdiction checked during planning.
  • Lake route: Near Belton Lake, the alignment and access need review before setting pits or planning a water crossing.
  • Street service: A run from Cottonwood Loop can pass beneath a driveway or paved section without opening a trench across the surface.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Cottonwood Loop bore quote in Morgan’s Point Resort?

For a Cottonwood Loop quote, send the address or map pin, what will go in the ground, pipe or conduit size and footage; a sketch or plans help. The route across Morgan’s Point Resort can change the work: tell us whether the alignment follows pavement, approaches Tanyard Branch or needs to reach FM 2483, so we can account for access and crossing conditions.

The job details set the price. Eckrant’s cobbly clay and shallow bedrock affect tooling and drilling time; a crossing beneath FM 2483 brings state cover requirements, while a Tanyard Branch route adds water crossing review. We also account for length, pipe size, utilities to expose, pavement, pits and excavator time. The 340 road miles from Yukon affect mobilization, and urgent or high profile work can change the scope.

Questions people ask about boring in Morgan’s Point Resort

Does Trinity Boring Solutions take directional boring work in Morgan’s Point Resort, Bell County?

Yes. We take directional boring work in Morgan’s Point Resort and coordinate it through our main office, with our own crews and vetted partner contractors staffing work from satellite yards. For a route near FM 2483, you deal with Trinity from the first call through the bore log, regardless of which crew is on site.

What ground does an Eckrant soil bore encounter in Morgan’s Point Resort?

Eckrant soil covers 85 percent of the mapped area, and the USDA soil survey describes very cobbly clay at the surface. At about 40 inches, bedrock is mapped across 92 percent. That combination can make a bore slow and hard on tooling, so the route and equipment should account for rock rather than assume uniform clay.

How much rock is mapped within five feet in Morgan’s Point Resort?

The USDA soil survey maps bedrock within 60 inches across 98 percent of Morgan’s Point Resort, including hard bedrock across 94 percent and weathered bedrock across 4 percent. Typical depth is 12 inches. These are mapped soil patterns, not site borings, but they point to rock affecting many routes, including ones near Morgan’s Point Road.

Who approves a bore beneath FM 2483 in Morgan’s Point Resort?

For work in FM 2483 right of way, the utility that owns the line files the application in TxDOT’s RULIS system, and the TxDOT Waco District reviews it. We provide the bore plan and profile and work under the permit issued to the utility owner. The needed cover depends on the line type and crossing.

Can a line be bored under Tanyard Branch in Morgan’s Point Resort?

A bore can be planned beneath Tanyard Branch, which runs 0.58 channel miles inside the city. The route must account for the channel, access and suitable pit locations. During planning, the crossing is checked for U.S. Army Corps of Engineers jurisdiction, and boring can leave the channel bank uncut when the plan allows.

Who runs the public water system in Morgan’s Point Resort, and where does its water come from?

The City of Morgan’s Point Resort owns the public water system, which uses purchased surface water. Records list 2,009 service connections and 5,000 people served. For a bore near Lake Forest Drive, we identify the line owner and pothole marked utilities before drilling close to the water line.

Does Trinity serve Temple and nearby rural sites outside Morgan’s Point Resort?

Yes. We take work in Texas beyond Morgan’s Point Resort, including Temple and rural sites outside the city limits. Temple is 5.4 miles southeast, while Belton is 7.2 miles south. The Yukon office is 340 road miles away, so distance and access are part of planning a job near either place.

How far ahead should I call Texas811 for a bore on Morgan’s Point Road in Morgan’s Point Resort?

Request a locate for the planned Morgan’s Point Road bore at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. Texas811 describes this as at least two working days. If work slips more than 14 days past the notice, make a new request; have worn or moved marks refreshed before work continues.

What affects the cost of directional boring near FM 2483 in Morgan’s Point Resort?

The scope sets the cost, not just the footage. Eckrant clay and shallow bedrock can affect drilling time; a crossing at FM 2483 may need deeper cover planning, and a route near Tanyard Branch adds crossing considerations. Pipe size, length, utilities to expose, pavement, pits, equipment time and the 340 road miles from Yukon also affect the job.

Where the Morgan’s Point Resort facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Morgan’s Point Resort

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Morgan's Point Resort, Texas

Type the address of your job in Morgan's Point Resort. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Morgan's Point Resort

Same county: Killeen · Harker Heights · Fort Hood · Salado · Little River-Academy · Holland · Rogers · Bartlett. All counties: Texas county list.