trinityboringsolutions.com

Salado Texas Directional Boring: Purves Soil, Salado Creek and Interstate 35

Quick Answer: Salado is a small incorporated town in Bell County, so its streets belong to the town; Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for lines crossing Salado Creek. Chisholm Trail and Interstate 35 are local crossing considerations, and Salado is 351 road miles from our Yukon, Oklahoma main office. USDA maps Purves soil across much of town, with bedrock often close to the surface, so a bore may need rock tooling and careful steering.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Salado bores at a glance

  • Incorporated city in Bell County, Texas. Population 2,483 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 351 miles, about 6.7 hours of driving.
  • Ground: Purves soil is mapped on 35 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 74 percent of the area.
  • Highways inside the boundary: Interstate 35, FM 2268, FM 1670 and FM 2484. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Salado Creek and Smith Branch.
  • Public water: Salado Water Supply Corporation, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Salado Creek in Salado?

Salado is an incorporated town in Bell County with a Census Bureau Vintage 2024 estimate of 2,483 residents. We install water, sewer, gas, electric conduit and fiber, with routes planned beneath streets such as Main Street or near Salado Creek where open cutting is not suitable. Trinity serves Oklahoma and Texas and takes directional boring work across Texas.

Our main office is in Yukon, Oklahoma, and Salado work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our reach includes a 4,100 foot, 48 inch casing bore under the Arkansas River in Tulsa; a typical Salado job would be much shorter, such as a service bore beneath Main Street. Trinity is a family business started in 1965, with directional boring work since 1982.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What is Purves soil like to bore in Salado?

The USDA soil survey maps Purves soil across 35 percent of Salado, including Purves silty clay map units covering 23 percent and 13 percent. Silty clay makes up 82 percent of the mapped surface texture. At about 40 inches below the surface, the survey maps bedrock over 50 percent of the area, silt loam over 23 percent and silty clay over 19 percent. The soil survey also maps 33 percent average clay at that depth. These are mapped patterns, not test borings; sticky clay can hold the hole open but build up on the reamer.

USDA soil survey, inside the Salado city limitsWhat is mapped
Soil series mappedPurves 35 percent, Denton 23 percent, Lewisville 15 percent, Frio 5 percent and Speck 4 percent
Texture at the surfacesilty clay 82 percent, clay loam 5 percent and clay 4 percent
Texture about 40 inches downbedrock 50 percent, silt loam 23 percent and silty clay 19 percent
Engineering class about 40 inches downlean clay (CL) 28 percent and fat clay (CH) 21 percent
Average clay content about 40 inches down33 percent
Bedrock mapped within 60 inches74 percent of the area (70 percent hard rock, 4 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils9 percent of the area
High corrosion risk for uncoated steel67 percent of the area

Bedrock is mapped within 60 inches across 74 percent of Salado, with hard bedrock across 70 percent and weathered bedrock across 4 percent. The typical mapped depth is 28 inches, so a bore may move from soil into rock quickly. Seasonal water tables within 60 inches are not mapped, while flood prone soils cover 9 percent, so Salado Creek banks need their own depth planning. High steel corrosion risk is mapped across 67 percent; the line owner selects protection for steel casing and tracer wire. Georgetown Limestone, a Cretaceous unit, is the mapped bedrock and may call for rock tooling.

How do we drill Salado ground with shallow bedrock?

Purves silty clay and Georgetown Limestone call for a plan that accounts for sticky soil and shallow rock. At Salado Creek, we also plan the bore depth around the channel and the ground at each entry and exit pit.

  1. We read Salado’s mapped Purves silty clay as ground that can cling to the reamer, so we use suitable fluid and staged reaming before pulling pipe.
  2. With bedrock mapped close to the surface in Salado, we track depth and pitch as the head approaches Georgetown Limestone and adjust tooling for harder ground.
  3. At Salado Creek, we plan a bore beneath the channel and keep the entry and exit pits on the banks clear of the crossing route.
  4. For work near Main Street, we hydrovac expose marked utilities before drilling close; surface paint does not show how deep a line sits.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

What is in the way of a new line in Salado near Chisholm Trail?

Interstate 35 runs through Salado, along with FM 2268, FM 1670 and FM 2484. Work in a state highway right of way needs TxDOT review, so a bore near those routes has a different approval path from one beneath a town street. Chisholm Trail is the longest named local street at 1.9 miles, followed by Main Street at 1.55 miles and Indian Trail at 1.32 miles. Mill Creek Drive runs 1.17 miles. Those streets offer possible bore routes, but the line path and existing utilities decide where pits can go.

CrossingTypeMapped extentWho has a say
Interstate 35Interstate6.5 roadway miles insideState highway office
FM 2268State highway2.3 roadway miles insideState highway office
FM 1670State highway0.4 roadway miles insideState highway office
FM 2484State highway0.4 roadway miles insideState highway office
Salado CreekStream2 channel miles insideChecked for Corps of Engineers jurisdiction
Smith BranchStream1.51 channel miles insideChecked for Corps of Engineers jurisdiction
Watkins BranchStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped within Salado or within one mile outside its limits, so there is no mapped local track crossing to plan around. Salado Creek runs 2.0 channel miles in town and Smith Branch runs 1.51 miles; six mapped street crossings intersect named streams. A creek bore needs a depth plan beneath the channel, and its setting is checked for U.S. Army Corps of Engineers jurisdiction during planning. No lakes or ponds are mapped within one mile.

Do I need a permit to bore near Interstate 35 in Salado?

For a bore in the Interstate 35, FM 2268, FM 1670 or FM 2484 right of way, the line owner files the utility permit in TxDOT’s online RULIS system; Trinity supplies the bore plan and profile and works under the owner’s permit. The TxDOT Waco District reviews it. TxDOT cover rules generally call for 60 inches below the lowest crossed grade for electric and communication lines and water lines, and for pressurized sewer. Water along a right of way needs 36 inches of cover. A Salado Creek crossing also needs planning for the channel and a check for federal waterway jurisdiction. Town streets such as Main Street belong to the town itself.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Salado and Bell County?

Salado Water Supply Corporation is a local government owned public water system using purchased surface water. It reports 3,817 service connections and 11,460 people served, so a proposed water bore near Indian Trail needs coordination around existing water infrastructure. Utilities reporting electric service in Bell County include Oncor Electric Delivery Company, Bartlett Electric Cooperative, Heart of Texas Electric Cooperative and Pedernales Electric Cooperative. We confirm the line owner before planning an electric conduit bore near Salado Creek; the county list does not establish which provider serves each address.

Line ownerWhat it isSourceSize
Salado Water Supply CorporationPublic water systemSurface water bought from another system3,817 connections, 11,460 people served
Oncor Electric Delivery Company, Bartlett Electric Cooperative, Heart of Texas Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Bell CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Salado’s median housing year at 1991. The survey estimates 5 percent of homes were built before 1960, 65 percent from 1960 to 1999 and 30 percent in 2000 or later. A replacement bore near Main Street may pass older buried service lines, while newer construction can call for a new service route. Before the drill approaches marked utilities, we expose them with hydrovac potholing; paint shows location, not depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

How far is Salado from Belton and our Yukon yard?

Salado is in Bell County, at an elevation of 586 feet, and covers 3.1 square miles. Its ZIP code is 76571. Belton, the county seat and nearest larger city, is 7.7 miles north; Holland is 8.6 miles southeast, and Nolanville is 9.7 miles northwest. Harker Heights lies 10.2 miles northwest and Sonterra is 10.6 miles southwest. From the Yukon, Oklahoma main office, the road distance is 351 miles and the drive is 6.7 hours. That distance is part of planning mobilization for work near Salado Creek or Interstate 35.

Places near Salado

What boring work comes up around Main Street in Salado?

  • Water service: A connection near the Salado Water Supply Corporation network can use a bore to avoid open cutting across a street or driveway.
  • Highway crossing: A route beneath Interstate 35 needs the line owner’s TxDOT permit and a bore plan that meets the district’s cover requirements.
  • Creek crossing: A line beneath Salado Creek needs a channel depth plan and a check for U.S. Army Corps of Engineers jurisdiction.
  • Street replacement: A sewer or water replacement near Main Street can pass below pavement while pits stay in the dirt on either side.
  • Fiber conduit: A conduit route along Indian Trail can avoid cutting the street, with marked lines exposed before the drill approaches.
  • Electric conduit: Near FM 2268, the electric line owner is confirmed before the conduit route and highway right of way permit are planned.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Salado bore near Mill Creek Drive?

For a quote, send the Salado address or map pin, what will go underground, the pipe or conduit size and footage; a sketch or plans help. Near Mill Creek Drive, note any pavement, drainage route or known utility crossing on the plan. Those details help us scope the bore path and access for entry and exit pits.

The price follows the job conditions, not just the length. Purves silty clay and shallow Georgetown Limestone can change tooling and drilling time; a crossing beneath Interstate 35 involves a highway permit and cover requirements. We also account for utility exposures, pavement, creek or drainage crossings, pits, excavator time and sand backfill. Salado’s 351 road miles from Yukon affect mobilization, and emergency work or a high profile site can change the scope.

Questions people ask about boring in Salado

Does Trinity take directional boring jobs in Salado and Bell County?

Yes. Trinity takes directional boring work in Salado and elsewhere in Texas. The town is in Bell County, and our crews handle the work with support from partner contractor satellite yards we have vetted. You deal with Trinity through the bore log, whichever crew is on site.

Who controls Indian Trail in Salado, and does it have to be cut?

Indian Trail is a town street because Salado is incorporated. A directional bore can place a line beneath the street without opening a trench through the pavement, subject to the site and utility layout. Marked lines near Indian Trail are exposed before drilling close to them.

What do Salado’s Main Street housing ages mean for replacement bores?

The American Community Survey 2019 to 2023 estimates give Salado a median housing year of 1991, with 5 percent of homes built before 1960. A replacement route near Main Street may encounter older service lines, so we expose marked utilities to confirm their depth before drilling nearby.

Does Purves soil in Salado corrode steel, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk across 67 percent of Salado, where Purves soil is common. That risk matters for uncoated steel casing and tracer wire. HDPE is not affected by soil corrosion; the line owner chooses any coating for steel components.

What ground does a bore pass through in Salado’s Purves soil?

The USDA soil survey maps Purves soil across 35 percent of Salado, with silty clay covering 82 percent of the surface. At about 40 inches down, it maps bedrock over 50 percent and silt loam over 23 percent. These are survey patterns, not site borings, so actual conditions can differ along a route.

Is there rock near the surface in Salado?

Yes. The USDA soil survey maps bedrock within five feet across 74 percent of Salado, including hard bedrock over 70 percent and weathered bedrock over 4 percent. Georgetown Limestone is the mapped geologic unit. A bore near Salado Creek may need rock tooling if its path reaches that layer.

Does the 7.7 mile distance to Belton change a Salado boring job?

Belton is 7.7 miles north of Salado, while our Yukon, Oklahoma main office is 351 road miles away. The Yukon distance can affect mobilization planning for a job near Belton or Salado Creek. We scope the work from the route, ground, crossings and equipment needed.

How much Texas811 notice does a Salado bore near Chisholm Trail need?

For a bore near Chisholm Trail, request locates at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays. Texas811 describes that as at least two working days. The request cannot be made more than 14 days ahead; if the start slips beyond that window, make a new request. Refresh worn or moved marks before work continues.

What affects the cost of a directional bore under Interstate 35 in Salado?

The job’s length, pipe size, Purves soil and shallow Georgetown Limestone affect the work, as do utility crossings, pavement and pits. A route beneath Interstate 35 also needs the line owner’s TxDOT permit and may require specific cover. Creek crossings, equipment time and mobilization from Yukon also factor into the price.

Where the Salado facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Salado

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Salado, Texas

Type the address of your job in Salado. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Salado

Same county: Killeen · Temple · Fort Hood · Morgan's Point Resort · Troy · Little River-Academy · Rogers · Bartlett · Pendleton. All counties: Texas county list.