trinityboringsolutions.com

Troy Texas Directional Boring: Austin Soil, Interstate 35 and Kings Branch

Quick Answer: Can a line pass under Interstate 35, a Union Pacific track or Kings Branch without cutting the surface? Yes, we take directional boring, also called horizontal directional drilling (HDD), work in Troy, Texas for crossings like these. Troy is 327 road miles from our Yukon, Oklahoma main office, so distance and a nearby feature such as Old 81 help shape mobilization. Austin soil and heavy clay can hold the hole open but cling to the reamer and pipe. A bore below Central Avenue can leave the pavement intact while we work from pits beside the route.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Troy bores at a glance

  • Incorporated city in Bell County, Texas. Population 3,427 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 327 miles, about 6.3 hours of driving.
  • Ground: Austin soil is mapped on 35 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 60 percent of the area.
  • Highways inside the boundary: Interstate 35, FM 935 and FM 1237. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: Union Pacific, with 3 mapped street and rail crossings.
  • Named streams inside the boundary: Kings Branch, Pecan Creek, Big Elm Creek and Cottonwood Creek.
  • Public water: City of Troy, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone handle directional boring in Troy near Kings Branch?

Can a bore pass under Kings Branch, Interstate 35 or a Union Pacific track without opening the surface? We take directional boring work in Troy, Bell County, where the Census Bureau Vintage 2024 estimate puts the population at 3,427. We install water, sewer, gas, electric conduit and fiber, including service lines along Central Avenue or connections near the City of Troy water system.

Our main office is in Yukon, Oklahoma, and Troy work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a small 3/4 inch service near Main Street or a 48 inch casing crossing by Interstate 35, our family business has been operating since 1965 and doing directional boring since 1982.

Trinity Boring Solutions Ditch Witch JT922 HDD rig and vacuum excavation truck on a commercial bore in Oklahoma City
Our Ditch Witch JT922 drill and vacuum excavation truck on a commercial bore in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Troy ground like for a bore through Austin soil?

The USDA soil survey maps Austin soil across 35% of Troy, with Houston Black at 29% and Stephen at 23%. Silty clay makes up 65% of the mapped surface texture, while the survey shows clay at 33%. At about 40 inches, the average clay content is 51%, and heavy clay covers 39% of the mapped area. Sandy texture is not mapped at that depth. These are mapped soil patterns, not test borings. The Austin and Houston Black clays can get sticky on a reamer, so staged reaming and a same day pipe pull can help limit the time the hole is open.

USDA soil survey, inside the Troy city limitsWhat is mapped
Soil series mappedAustin 35 percent, Houston Black 29 percent, Stephen 23 percent, Lott 6 percent and Tinn 3 percent
Texture at the surfacesilty clay 65 percent and clay 33 percent
Texture about 40 inches downbedrock 60 percent, clay 33 percent and silty clay 6 percent
Engineering class about 40 inches downfat clay (CH) 33 percent and lean clay (CL) 7 percent
Average clay content about 40 inches down51 percent
Bedrock mapped within 60 inches60 percent of the area (0 percent hard rock, 60 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel98 percent of the area

The USDA soil survey maps bedrock within 40 inches across 60% of Troy, with typical depth at 23 inches; the mapped material is weathered bedrock, not hard bedrock. The Austin Chalk geologic unit is Late Cretaceous marlstone, chalk and claystone, so a bore may slow where it reaches chalk. Seasonal water table soils are not mapped, while flood prone soils cover 3%, so Kings Branch still needs site specific depth planning. High steel corrosion risk covers 98% of the mapped area; the line owner should choose any coating for steel casing or tracer wire.

How do we drill Troy where bedrock is mapped near the surface?

Austin soil and weathered bedrock call for a bore plan that accounts for sticky clay and changing resistance. Along Old 81 or near Kings Branch, we track the drill and adjust the approach to the ground encountered.

  1. Because Houston Black and Austin soils are clay heavy, we use staged reaming and manage fluid returns to limit pressure that could lift pavement along Old 81.
  2. Where the mapped Austin Chalk reaches the bore path, we slow down for weathered rock and watch for steering changes at the soil to rock contact near Central Avenue.
  3. Before the drill approaches any marked utility, we use hydrovac potholing to expose it; paint near Main Street shows a route, not its depth.
  4. For a bore beneath Central Avenue, we can hydrovac pothole the marked lines first, then track the drill head from the surface and log depth and pitch.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

Which Troy roads, tracks or creeks involve Union Pacific?

Interstate 35, FM 935 and FM 1237 run within Troy city limits, and the mapped Interstate 35 roadway totals 16.6 miles in the city. Old 81 is the longest named street at 3.35 miles, followed by Central Avenue at 2.78 miles and Lower Troy Road at 1.99 miles. Main Street and Austin Street are other possible routes for local service work. A bore can pass beneath pavement or a driveway without cutting across its surface, with entry and exit pits placed off the paved route where access allows.

CrossingTypeMapped extentWho has a say
Interstate 35Interstate16.6 roadway miles insideState highway office
FM 935State highway1.1 roadway miles insideState highway office
FM 1237State highway0.2 roadway miles insideState highway office
Union PacificRailroad2.62 track miles insideThe railroad
Kings BranchStream1.44 channel miles insideChecked for Corps of Engineers jurisdiction
Pecan CreekStream1.11 channel miles insideChecked for Corps of Engineers jurisdiction
Big Elm CreekStream0.55 channel miles insideChecked for Corps of Engineers jurisdiction
Cottonwood CreekStream0.36 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 2.62 track miles in Troy, and the mapped street and rail crossing count is 3. Any proposed track crossing needs coordination with the railroad that owns the line. Kings Branch runs 1.44 channel miles in the city; Pecan Creek, Big Elm Creek and Cottonwood Creek are also mapped streams. Public records show 15 street crossings of named streams. No lakes or ponds are mapped within one mile, but a creek route still needs careful depth planning.

Whose permission does a Troy bore under Interstate 35 need?

For electric or communication lines crossing Interstate 35, the cover requirement is at least 60 inches below the lowest point of the crossed grade; along its right of way, the minimum is 48 inches. Water needs 60 inches at crossings and 36 inches along the right of way, while pressurized sewer needs 60 inches at crossings. TxDOT Waco District reviews the utility permit for Interstate 35 and the state roads FM 935 and FM 1237. The line owner, not our contractor, files through TxDOT’s RULIS system; we provide the bore plan and profile. A Union Pacific crossing requires an agreement with the railroad. Kings Branch crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. Troy city streets belong to the city.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns lines near the City of Troy water system?

The City of Troy public water system uses purchased surface water and serves 4,367 people through 1,616 service connections. Oncor Electric Delivery Company, Bartlett Electric Cooperative, Heart of Texas Electric Cooperative and Pedernales Electric Cooperative report service in Bell County. Those reports do not identify the provider at every address, so the line owner must be confirmed before we plan an electric conduit bore along Central Avenue or another Troy route.

Line ownerWhat it isSourceSize
City of TroyPublic water systemSurface water bought from another system1,616 connections, 4,367 people served
Oncor Electric Delivery Company, Bartlett Electric Cooperative, Heart of Texas Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Bell CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put Troy’s median housing year at 1994; 10% of homes were built before 1960, and 47% were built in 2000 or later. A replacement bore near Main Street may need to avoid older buried lines, while newer development can call for a service extension. Before drilling near any marked utility, we expose it with hydrovac potholing because paint shows its position, not its depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

What is near Troy, including Temple?

Troy is an incorporated city in Bell County, at an elevation of 724 feet, with 4.65 square miles of land and ZIP codes 76579 and 76501. Pendleton is 1.4 miles west; Temple is 8.1 miles southwest, and Bruceville-Eddy is 8.3 miles north. Moody is 8.5 miles northwest, while Morgan’s Point Resort is 9.8 miles west. Belton, the county seat, is 14.4 miles southwest. Our Yukon yard is 327 road miles away, about a 6.3 hour drive, which is part of the mobilization picture for a Troy job near Interstate 35 or Kings Branch.

Places near Troy

What kinds of bores come up in Troy near Central Avenue?

  • Highway crossing: A bore beneath Interstate 35 keeps the line below the pavement, with the required depth and TxDOT review built into the plan.
  • Water service: A connection toward the City of Troy system can follow a route near Central Avenue without cutting the street surface.
  • Fiber conduit: A run along Old 81 can use a bore route that passes below driveways and pavement rather than opening a trench across them.
  • Creek crossing: A route below Kings Branch needs depth planning for the channel and a check for U.S. Army Corps of Engineers jurisdiction.
  • Rail crossing: A proposed bore beneath Union Pacific track needs the railroad’s crossing agreement and its requirements for casing, depth and flagging.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a Troy bore near Main Street?

For a bore near Main Street, first send the address or a map pin. Tell us what goes in the ground, such as water service for a property near the City of Troy system, then give the pipe or conduit size and the footage. A sketch or plans help us understand access and the route toward Central Avenue, Kings Branch or another local crossing.

Troy is 327 road miles from our Yukon yard, so mobilization is part of the job scope. Austin soil and the mapped weathered bedrock can affect drilling time, while Interstate 35, Union Pacific tracks and creek crossings add planning and exposure needs. Pipe size and length, pavement, pits, excavator time and sand backfill also shape the work. High profile or emergency work can change the plan.

Questions people ask about boring in Troy

Does Trinity Boring Solutions take directional boring jobs in Troy, Bell County?

Yes. We serve Troy, Bell County, with our own crews and partner contractor satellite yards that Trinity has vetted. You deal with Trinity from the first call through the bore log, whichever crew is on site. We can discuss a service near Main Street or a crossing at Kings Branch without suggesting a local office.

Can you bore a line under Kings Branch in Troy?

A bore beneath Kings Branch can be planned without cutting through the channel, subject to site conditions and the route. The stream runs 1.44 channel miles within Troy, and the crossing is checked during planning for U.S. Army Corps of Engineers jurisdiction. We also plan depth to stay below the channel.

Who runs Troy’s public water system, and where does the water come from?

The City of Troy owns the public water system, which uses purchased surface water. Public records list 1,616 service connections serving 4,367 people. For a proposed service near Central Avenue, the water system detail helps identify the line owner and the connection being planned.

Which electric provider should I check for a conduit bore in Troy, Bell County?

Bell County utility reports name Oncor Electric Delivery Company, Bartlett Electric Cooperative, Heart of Texas Electric Cooperative and Pedernales Electric Cooperative. Those reports do not establish which company serves a particular Troy address. Confirm the line owner and conduit specifications before planning a bore near Old 81 or another route.

Can you bore under Lower Troy Road in Troy, or does the street have to be cut?

Troy city streets belong to the city, and a bore can pass beneath Lower Troy Road without cutting the street surface. The route still depends on access, existing utilities and ground conditions. We expose marked lines before drilling near them, since surface markings do not show how deep a utility sits.

What do Troy homes near Central Avenue mean for replacement utility bores?

The American Community Survey 2019 to 2023 five year estimates give Troy a median housing year of 1994, with 10% of homes built before 1960 and 47% built in 2000 or later. A replacement route near Central Avenue may meet older buried lines, so marked utilities need to be exposed before the drill approaches.

What bore sizes and lengths can you handle for a Troy job near Main Street?

We handle lines from 3/4 inch service size up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The right size and length for a Main Street route depend on what the line carries, the ground and the crossings along the planned path.

How early should I call Texas811 for a bore on Old 81 in Troy?

For a planned Old 81 start, place the Texas811 locate request at least 48 hours ahead, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before excavation. If the start moves more than 14 days past the original notice, make a new request. Have worn or moved marks refreshed before work continues.

What affects the cost of a directional bore under Interstate 35 in Troy?

The price depends on the job scope, not just length. A bore at Interstate 35 may involve highway permitting, pavement, greater cover depth and utility exposure. Austin soil, weathered bedrock, pipe size, creek or railroad crossings, pits, backfill and excavator time also affect the work. Mobilization from Yukon matters for Troy’s 327 road mile distance.

Where the Troy facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Troy

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Troy, Texas

Type the address of your job in Troy. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Troy

Same county: Killeen · Harker Heights · Fort Hood · Belton · Nolanville · Salado · Little River-Academy · Holland · Rogers · Bartlett. All counties: Texas county list.