Parker Texas Directional Boring: Houston Black, FM 2551 and Cottonwood Creek
Quick Answer: Houston Black clay covers much of Parker, and we do directional boring, also called horizontal directional drilling (HDD), for work near FM 2551. The Yukon, Oklahoma main office is 223 road miles from Parker, near Cottonwood Creek. Houston Black clay holds a bore open but can stick to the reamer. That calls for staged reaming and a same day pipe pull. A route near Parker Road needs its own utility checks.
Parker bores at a glance
- Incorporated city in Collin County, Texas. Population 6,332 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 223 miles, about 4.5 hours of driving.
- Ground: Houston Black soil is mapped on 63 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 26 percent of the area.
- Highways inside the boundary: FM 2551. State permit office: TxDOT Dallas District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Cottonwood Creek, Maxwell Creek, Turner Branch and Darby Branch.
- Public water: City of Parker, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near CPKC (Kansas City Southern) in Parker?
We take directional boring work in Parker, Collin County. For Parker’s underground planning, we account for the Census Bureau Vintage 2024 population estimate of 6,332. Along Parker Road or FM 2514, our crews install water, sewer, gas, electric conduit and fiber where a route needs to pass beneath pavement, driveways or other marked utilities. The crossing plan depends on the line and the ground at that address.
Our main office is in Yukon, Oklahoma, and Parker work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa, Oklahoma. A Parker bore near Cottonwood Creek would be a different scale of job. Our family business started in 1965, and we have done directional boring since 1982.

What does the soil survey show beneath Parker’s Houston Black soil?
The USDA soil survey maps Houston Black as 63 percent of Parker, with Houston Black clay map units covering 48 percent and 13 percent of the area. At about 40 inches below the surface, clay is mapped across 69 percent, and the average clay content is 53 percent. The survey also maps CH soil at that depth across 72 percent. We treat these mapped patterns as planning context for Parker boring, not as a substitute for test borings. For a route near Dublin Road, the dense clay can hold the hole but may cling to the reamer.
| USDA soil survey, inside the Parker city limits | What is mapped |
|---|---|
| Soil series mapped | Houston Black 63 percent, Austin 11 percent, Stephen 9 percent, Eddy 6 percent and Burleson 5 percent |
| Texture at the surface | clay 69 percent, silty clay 24 percent and gravelly clay loam 6 percent |
| Texture about 40 inches down | clay 69 percent, bedrock 26 percent and silty clay 4 percent |
| Engineering class about 40 inches down | fat clay (CH) 72 percent |
| Average clay content about 40 inches down | 53 percent |
| Bedrock mapped within 60 inches | 26 percent of the area (0 percent hard rock, 26 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 2 percent of the area |
| High corrosion risk for uncoated steel | 94 percent of the area |
The survey maps bedrock within 40 inches across 26 percent of Parker; its typical mapped depth is 19 inches. The geologic map names Austin Chalk, a Late Cretaceous unit, so a route can encounter weathered chalk and drill more slowly. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 2 percent. High steel corrosion risk is mapped across 94 percent, a reason to discuss casing and tracer wire materials with the line owner. Houston Black clay can also swell and grip pipe.
How do crews bore through Parker’s clay?
Houston Black clay is mapped across much of Parker, including near FM 2551. We adjust the fluid and reaming sequence to manage sticky cuttings, keep pressure in check and prepare the pipe before opening the hole to its final size.
- Near Parker Road, Houston Black clay can build up on a reamer, so we use staged reaming and prepare the pipe for a same day pull.
- Because heavy clay is mapped across Parker, we watch returns and keep drilling pressure controlled near pavement to reduce the chance of lifting it.
- Where the Austin Chalk map unit is encountered near FM 2551, weathered rock can slow progress; the route and ground guide bit selection.
- At a Cottonwood Creek crossing, we plan below the channel, expose marked utilities with hydrovac and check the drill path before advancing.

What does a bore have to cross near FM 2551 in Parker?
FM 2551 is the state highway mapped inside Parker, with 2.4 roadway miles in the city. Parker also has 80.39 public road centerline miles. Its longest named streets include FM 2514 and Parker Road, each with 4.05 miles in the city, followed by Dublin Road at 2.79 miles. A bore beneath one of these routes can keep pavement and driveways uncut, with pits placed in dirt on either side. The specific path determines which utilities need to be exposed.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 2551 | State highway | 2.4 roadway miles inside | State highway office |
| CPKC (Kansas City Southern) | Railroad nearby | 0.5 miles outside | The railroad |
| Cottonwood Creek | Stream | 2.72 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Maxwell Creek | Stream | 1.63 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Turner Branch | Stream | 1.38 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Darby Branch | Stream | 0.66 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Muddy Creek | Stream | 0.11 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Rowlett Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Brown Branch | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
| Muddy Creek Reservoir | Lake or pond | 107 acres, nearby | Checked for Corps of Engineers jurisdiction |
No railroad track is mapped inside Parker, and no street and rail crossings are mapped in the city. CPKC (Kansas City Southern) track is 0.5 miles beyond the limits; a route reaching it needs an agreement with the railroad. Cottonwood Creek runs 2.72 channel miles in Parker, and the city has 12 mapped street crossings of named streams. Maxwell Creek and Turner Branch are also inside the limits. Muddy Creek Reservoir, a 107 acre lake, is outside the city but within one mile.
Who approves a bore in Parker and Collin County?
Parker is an incorporated city, so its city streets belong to the city itself. FM 2551 is a state highway, and work in its right of way goes to TxDOT’s Dallas District for review. The utility that owns the line submits the application through TxDOT’s RULIS system; we provide the bore plan and profile and work under the utility owner’s permit. A crossing of CPKC (Kansas City Southern) track needs an agreement from the railroad. For Cottonwood Creek, planning includes checking whether the crossing is under U.S. Army Corps of Engineers jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines near the City of Parker water system?
The City of Parker public water system uses purchased surface water and reports 2,162 service connections serving 6,486 people. Along Parker Road or FM 2551, the water line owner and route still need to be confirmed before a bore is planned. Electric utilities reporting service in Collin County include Oncor Electric Delivery Company, Texas-New Mexico Power, Denton County Electric Cooperative, Fannin County Electric Cooperative, Farmers Electric Cooperative and Grayson-Collin Electric Cooperative. The electric line owner must be confirmed before conduit specifications are set.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Parker | Public water system | Surface water bought from another system | 2,162 connections, 6,486 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, Denton County Electric Cooperative, Fannin County Electric Cooperative, Farmers Electric Cooperative and Grayson-Collin Electric Cooperative | Electric utilities reporting service in Collin County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Parker’s median housing year at 2005; 69 percent of housing was built in 2000 or later, and 31 percent from 1960 to 1999. Replacement work along Dublin Road may need to meet existing lines, while newer services can call for a different route. Before drilling near the City of Parker water line or an electric conduit, we hydrovac expose marked utilities along the bore path. Paint shows position, not depth.

What is near Parker and Seis Lagos?
Parker is in Collin County, covers 8.5 square miles and sits at an elevation of 612 feet. For underground planning in Parker, we check whether an address falls within ZIP codes 75002 or 75094. Seis Lagos is 3.5 miles east, Murphy is 3.2 miles south, and Lucas is 3.8 miles northeast. McKinney, the county seat, is 10.0 miles north; Murphy is the nearest larger city listed. From our Yukon, Oklahoma main office, Parker is 223 road miles away, a 4.5 hour drive. That distance is part of planning a crew mobilization for a bore near FM 2551.
Places near Parker
- Directional boring in Murphy: 3.2 miles south
- Seis Lagos: 3.5 miles east
- Directional boring in Lucas: 3.8 miles northeast
- St. Paul: 4.3 miles east
- Directional boring in Allen: 4.4 miles northwest
What kinds of bores come up near Dublin Road in Parker?
- Highway crossing: A bore beneath FM 2551 keeps the existing roadway uncut, subject to the TxDOT permit for work in its right of way.
- Water service: A replacement or new connection near Parker Road needs the City of Parker line location confirmed before the drill approaches.
- Fiber route: A conduit run along FM 2514 needs marked utilities exposed before drilling near the street.
- Creek crossing: A route at Cottonwood Creek needs channel depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
- Rail crossing: If a Parker route reaches CPKC (Kansas City Southern) track outside the city, the railroad agreement sets the crossing conditions.
- Street service: A bore near Dublin Road can place pits off the pavement and carry a service beneath the street.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a Parker bore near Cottonwood Creek?
A map pin near Cottonwood Creek matters because the exact spot can change the route, access and creek crossing review. Send the Parker address or pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us check the path near streets such as Dublin Road and identify likely crossings.
The 223 road miles from Yukon affect mobilization for a Parker job. Houston Black clay, possible Austin Chalk and the pipe or conduit size shape the drilling plan. A route under FM 2551 or near CPKC (Kansas City Southern) can add crossing requirements, while Cottonwood Creek can affect planning and access. Length, utilities to expose, pavement, pits, excavator time and sand backfill also change the work. High profile or emergency timing can add demands.
Questions people ask about boring in Parker
Does Trinity Boring Solutions take directional boring jobs in Parker and Collin County?
Yes. We take work in Parker, Collin County, using our own crews and partner drilling contractors from satellite yards. For Parker work, we deal with Trinity from the first call through the bore log, regardless of which crew is on site. For a route near FM 2551, we plan around the actual location and marked utilities.
When we plan boring in Parker, who runs its public water system, and where does its water come from?
For Parker boring plans, we account for the public water system owned by the City of Parker, which uses purchased surface water. It reports 2,162 service connections serving 6,486 people. For a bore near Parker Road, the route still needs to be checked against the water line location before drilling begins.
Which electric company serves Parker in Collin County, and who confirms conduit specs?
The county reports several electric utilities, including Oncor Electric Delivery Company, Texas-New Mexico Power and Farmers Electric Cooperative. That list does not identify the provider at every Parker address. The line owner must be confirmed before conduit specifications are set for a bore near Dublin Road.
Who controls Dublin Road in Parker, and does a bore require cutting it?
Dublin Road is a city street because Parker is incorporated. Directional boring can carry a line beneath pavement without cutting the street, with pits placed in dirt on each side. The exact route and utility locations still need checking before work near Dublin Road.
How old are Parker Road homes and buried lines, and what does that mean for replacement bores?
The American Community Survey 2019 to 2023 estimates put Parker’s median housing year at 2005. That age does not establish the age of buried lines along Parker Road, so the route and existing utilities need verification. A replacement bore can pass beneath pavement, with marked lines exposed before drilling near them.
Does Houston Black soil in Parker corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 94 percent of Parker. The line owner should decide whether steel casing or tracer wire needs a coating; HDPE is not affected by this soil corrosion concern. Houston Black clay can also grip pipe, so the bore plan accounts for its behavior.
Does Parker’s distance from Murphy change a bore from the Yukon office?
Parker is 223 road miles and a 4.5 hour drive from our Yukon, Oklahoma main office; Murphy is 3.2 miles south of Parker. That distance affects mobilization planning and can influence the job scope. We coordinate the work with you from the first call through the bore log.
How much Texas811 notice is needed for a Parker bore near FM 2514?
For work near FM 2514, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the original notice, request a new notice. Before we continue work in Parker, we refresh any worn or moved marks through Texas811.
What affects the cost of a directional bore near FM 2551 in Parker?
The job scope sets the price for a bore near FM 2551. Length, pipe or conduit size, Houston Black clay or Austin Chalk, utility crossings and pavement all matter. Creek crossings, pits, excavator time, backfill, urgency and the 223 road mile mobilization from Yukon can also change the work required.
Where the Parker facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Parker
- U.S. Census Bureau, TIGER/Line 2024: Parker boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Parker
- U.S. Census Bureau, American Community Survey 2019 to 2023: Parker housing units and year built
- Macrostrat geologic map compilation: map units under Parker
- U.S. EPA Safe Drinking Water Information System: public water systems serving Parker
- U.S. Department of Transportation, North American Rail Network: track owners in Collin County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Collin County
- U.S. Geological Survey, Elevation Point Query Service: Parker elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Parker
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Parker
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Parker, Texas
Type the address of your job in Parker. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
