trinityboringsolutions.com

Red Rock Texas Directional Boring: Behring Clay Loam, FM 20, Union Pacific

Quick Answer: Red Rock is an unincorporated community, so its streets are under county or state authority; our directional boring, also called horizontal directional drilling (HDD), can cross the Union Pacific tracks without cutting them. The Yukon main office is 430 road miles away, with FM 20 running through the community. Behring clay loam and heavy clay mapped below the surface can cling to a reamer, so the bore needs staged reaming and controlled drilling fluid. Town Creek crossings also need site specific planning.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Red Rock bores at a glance

  • Unincorporated community in Bastrop County, Texas. Population 410 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 430 miles, about 8.3 hours of driving.
  • Ground: Behring soil is mapped on 39 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 38 percent of the area.
  • Highways inside the boundary: FM 20 and FM 812. State permit office: TxDOT Austin District.
  • Railroad track inside the boundary: Union Pacific, with 7 mapped street and rail crossings.
  • Named streams inside the boundary: Town Creek and Elm Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring in Red Rock near FM 20?

Red Rock is an unincorporated community in Bastrop County, so it has no city government and streets are under county or state authority. The Census Bureau counted 410 people here in the 2020 Census. Along FM 20, Bartsch Lane or Sand Hills Road, we install water, sewer, gas, electric conduit and fiber lines by directional boring, with the route planned for the specific street and existing crossings.

Our main office is in Yukon, Oklahoma, and Red Rock work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We handle work from 3/4 inch service lines to 48 inch casing, from a small service run near Goertz Drive to a larger casing job. Our family business started in 1965 and has done directional boring since 1982.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should I expect for a bore in Red Rock near Behring soil?

The USDA soil survey maps Behring soil across 39% of Red Rock and Crockett across 37%, followed by Heiden, Whitesboro and Wilson. Behring clay loam is mapped on 27% of the area on 3 to 5 percent slopes, eroded, and on 12% on 1 to 3 percent slopes. At the surface, clay loam covers 48% and fine sandy loam 38%. About 40 inches down, 93% of the mapped area is clay, with an average clay content of 46%. These are mapped soil patterns, not test borings.

USDA soil survey, inside the Red Rock mapped community boundaryWhat is mapped
Soil series mappedBehring 39 percent, Crockett 37 percent, Heiden 12 percent, Whitesboro 6 percent and Wilson 4 percent
Texture at the surfaceclay loam 48 percent, fine sandy loam 38 percent and clay 14 percent
Texture about 40 inches downclay 93 percent and clay loam 7 percent
Engineering class about 40 inches downfat clay (CH) 93 percent and lean clay (CL) 7 percent
Average clay content about 40 inches down46 percent
Bedrock mapped within 60 inches38 percent of the area (0 percent hard rock, 38 percent weathered rock)
Seasonal water table within 60 inches1 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel93 percent of the area

The USDA soil survey maps bedrock within 60 inches on 38% of Red Rock, all described as weathered bedrock; none is mapped within 40 inches, and hard bedrock is not mapped within 60 inches. A bore may still meet changing ground, so the route needs checking. Seasonal water tables within 60 inches affect 1% of the mapped area, while flood prone soils cover 6%, including near Town Creek. Steel corrosion risk is mapped across 93%, so the line owner should select any coating for steel casing or tracer wire; HDPE avoids that steel corrosion concern. The geologic map identifies the Paleogene Wilcox Group, undivided, described mostly as mudstone with varying sand, lignite and other materials.

How do we bore Red Rock clay along Town Creek?

Behring clay loam and clay mapped below the surface can stick to the tooling and grip a pipe. Along Town Creek or FM 20, we adjust the drilling fluid and reaming sequence to the ground and the nearby surface.

  1. For Behring clay loam and the clay mapped about 40 inches down, we use thinner drilling fluid and ream in stages to limit sticky buildup on the tooling.
  2. Heavy clay can hold pressure, so near FM 20 pavement we watch fluid returns and keep pressure controlled to avoid lifting the surface.
  3. Before drilling near marked lines on Sand Hills Road, we use hydrovac potholing to expose them; paint shows position, not depth.
  4. At Town Creek, we track the drill head from the surface, record depth and pitch, and plan the bore beneath the channel.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

Where might a Red Rock bore pass under Union Pacific tracks?

FM 20 has 4.3 mapped roadway miles inside the Red Rock community boundary, and FM 812 has 1.8. Both are state highways. A line along Bartsch Lane, the community’s 1.47 mile longest named streets, may also need to pass beneath local access or other marked utilities. Goertz Drive runs 1.6 miles and Sand Hills Road 1.51 miles inside the community. Boring can keep pavement and driveways intact, but the route and the location of the entry and exit pits depend on the crossing.

CrossingTypeMapped extentWho has a say
FM 20State highway4.3 roadway miles insideState highway office
FM 812State highway1.8 roadway miles insideState highway office
Union PacificRailroad3.12 track miles insideThe railroad
Town CreekStream1.51 channel miles insideChecked for Corps of Engineers jurisdiction
Elm CreekStream0.6 channel miles insideChecked for Corps of Engineers jurisdiction
Upper Elm CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 3.12 track miles inside Red Rock on the Lockhart Subdivision, and mapped records show 7 street and rail crossings in the community. A rail bore needs the railroad’s crossing agreement, which sets its casing, depth and flagging. Town Creek runs 1.51 channel miles here and Elm Creek 0.6; mapped street crossings of named streams total 3. None of the mapped lakes or ponds is within one mile. Creek routes need planning around the channel and a check for federal waterway jurisdiction.

Who permits a Red Rock bore in Bastrop County?

Red Rock has no city government, so a street permit is handled by Bastrop County or the state, depending on the road. FM 20 and FM 812 are state highways, so work in their right of way goes through TxDOT’s Austin District. The utility that owns the line files the application in TxDOT’s RULIS system; we prepare the bore plan and profile and work under the permit issued to that utility. A Union Pacific crossing also needs an agreement from the railroad, and TxDOT requests a copy if the line is also on highway right of way. For Town Creek or Elm Creek, planning includes checking for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve addresses in Red Rock and Bastrop County?

The water provider for a specific Red Rock address must be confirmed with the county or the local water district before planning a bore; public records do not identify a provider by this community. For electric service, Oncor Electric Delivery Company, Bluebonnet Electric Cooperative and Fayette Electric Cooperative report service in Bastrop County. That does not establish which one serves a given address, so the electric line owner needs to be confirmed before a conduit bore near FM 20 or Goertz Drive.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Bluebonnet Electric Cooperative and Fayette Electric CooperativeElectric utilities reporting service in Bastrop CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Red Rock’s median housing year at 1969; 81% of homes were built from 1960 to 1999 and 8% before 1960. That points to a mix of replacement work and newer service connections, not a known age for any buried line. Along Sand Hills Road, hydrovac potholing lets us expose marked utilities and check their depth before the drill approaches.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Do you cover Red Rock and nearby Cedar Creek?

Red Rock is in Bastrop County, covers 4.52 square miles and sits at an elevation of 484 feet. The ZIP code is 78662. Rosanky is 7.8 miles east, Cedar Creek is 9.4 miles northwest and Wyldwood is 11.8 miles north. Bastrop, the county seat and nearest larger city listed, is 12.8 miles northeast. Our Yukon yard is 430 road miles away, or 8.3 hours by drive. That distance is part of planning mobilization for work near FM 20 or Pettytown Road.

Places near Red Rock

Which jobs call for a bore in Red Rock near Bartsch Lane?

  • Highway crossing: A utility route under FM 20 needs a bore plan for the TxDOT right of way, with the utility owner handling the permit filing.
  • Water service: A service run near Pettytown Road needs the address specific water provider confirmed before its bore route is set.
  • Fiber conduit: A fiber route along Goertz Drive can pass beneath pavement while hydrovac potholes expose marked lines before drilling near them.
  • Creek crossing: A Town Creek bore needs a route planned beneath the channel and a check for U.S. Army Corps of Engineers jurisdiction.
  • Rail crossing: A bore beneath Union Pacific’s Lockhart Subdivision requires the railroad’s crossing agreement for casing, depth and flagging.
  • Replacement bore: Near Sand Hills Road, potholing can help locate existing buried lines before a replacement route is drilled.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Red Rock bore near Pettytown Road?

A map pin for Pettytown Road or a Town Creek crossing matters because a small shift can change which road, drainage or utility the bore must pass. Send the address or pin, what goes underground, pipe or conduit size and footage. A sketch or plans help us see the route, the surface limits and where the pits can fit.

A short, clear route through Behring clay loam can be simpler to plan than a crossing with several marked lines or difficult access. Price depends on length, pipe or conduit size, soil and rock, utilities crossed and exposed, pavement, creek or drainage crossings, pits, excavator time and sand backfill. A crossing beneath FM 20 or Union Pacific tracks brings added planning, and the 430 road miles from Yukon affect mobilization. High profile or emergency work can also change the job scope.

Questions people ask about boring in Red Rock

Does Trinity take directional boring work in Red Rock and Bastrop County?

Yes. We take directional boring work in Red Rock, including routes near FM 20 and Town Creek. The work is handled by our crews or from satellite yards run by partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, regardless of which crew is on site.

Who controls Bartsch Lane in Red Rock, and does a bore cut the street?

Red Rock has no city government, so Bartsch Lane is not a city street; street authority depends on whether the route is under county or state control. A directional bore can pass under pavement without cutting it. The permit path and bore plan depend on the street and any nearby utilities.

Are buried lines near Sand Hills Road in Red Rock old enough to replace?

The American Community Survey 2019 to 2023 five year estimates put the median housing year at 1969, with 81% of homes built from 1960 to 1999. That does not establish the age of a buried line near Sand Hills Road. Potholing can expose marked lines before a replacement bore is routed.

Can Behring soil in Red Rock corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 93% of Red Rock, including areas mapped as Behring clay loam. The line owner chooses any coating for steel casing or tracer wire. HDPE does not have the same steel corrosion concern, but the pipe material must suit the line and project.

What ground will a bore meet in Red Rock around Behring soil?

The USDA soil survey maps Behring across 39% of Red Rock, and 93% of the area is mapped as clay at about 40 inches below the surface. The survey reports an average clay content of 46% at that depth. Sticky clay can build up on a reamer, so staged reaming and fluid control matter.

Will a Red Rock bore hit rock, and how much is mapped near the surface?

The USDA soil survey maps bedrock within 60 inches on 38% of Red Rock, all described as weathered bedrock. None is mapped within 40 inches, and hard bedrock is not mapped within 60 inches. Those map patterns do not establish the conditions at a particular bore on FM 20 or another route.

Can I reach someone after hours about an urgent bore near Bartsch Lane in Red Rock?

Yes. Trinity answers the phone 24 hours a day at (405) 409-7423 for urgent work, including a request involving Bartsch Lane. We need the location and the line or crossing involved to understand the situation. An emergency or high profile job can affect the work scope and mobilization.

How early should I call 811 for a bore near Goertz Drive in Red Rock?

The party arranging excavation should request locates through Texas811 at least 48 hours before work starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If a Goertz Drive start slips more than 14 days, make a new request. Worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of directional boring near FM 20 in Red Rock?

The job scope sets the price. Length, pipe or conduit size, Behring clay, utilities to expose, pavement, creek crossings, pits and excavator time all matter. A route under FM 20 or Union Pacific tracks adds crossing planning, while mobilization from the Yukon yard reflects the 430 road miles to Red Rock.

Where the Red Rock facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Red Rock

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Red Rock, Texas

Type the address of your job in Red Rock. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Red Rock

Same county: Elgin · Camp Swift · Smithville · Circle D-KC Estates · McDade · Paige. All counties: Texas county list.