trinityboringsolutions.com

Elgin Texas Directional Boring: Behring Clay Loam, US 290, Elm Creek

Quick Answer: Along US 290, we do directional boring, also called horizontal directional drilling (HDD), with our crews and vetted partner crews; Elgin is 389 road miles from our Yukon, Oklahoma main office. Avenue C and the Union Pacific track are examples of local features a route may need to pass beneath without cutting the surface. Behring clay loam and clay mapped about 40 inches down can make cuttings sticky and grip pipe. Elm Creek crossings also call for planning around the channel and checking whether the crossing falls under Corps jurisdiction.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Elgin bores at a glance

  • Incorporated city in Bastrop County and Travis County, Texas. Population 12,438 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 389 miles, about 7.7 hours of driving.
  • Ground: Behring soil is mapped on 20 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 23 percent of the area.
  • Highways inside the boundary: US 290, US 290 Business, Texas State Highway 95, FM 1100 and Loop 109. State permit office: TxDOT Austin District.
  • Railroad track inside the boundary: Union Pacific and Austin Western Railroad, with 24 mapped street and rail crossings.
  • Named streams inside the boundary: Elm Creek, Little Sandy Creek and Dry Creek.
  • Public water: City of Elgin, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Elgin’s Avenue C?

Elgin is 389 road miles from our Yukon, Oklahoma main office, so we staff work with our own crews and from vetted partner contractor satellite yards. The Census Bureau Vintage 2024 estimate puts Elgin’s population at 12,438 across Bastrop and Travis counties. We install water, sewer, gas, electric conduit and fiber, including routes along Avenue C or across US 290.

Our main office is in Yukon, Oklahoma, and Elgin work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business that started in 1965 and has done directional boring since 1982. With City of Elgin water lines and electric service reported by Oncor Electric Delivery Company, Bluebonnet Electric Cooperative and Fayette Electric Cooperative, our record of no utility strike in over 25 years matters on crowded routes.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

How does Elgin’s Behring soil affect a bore?

The USDA soil survey maps Behring and Crockett as the leading soil series, each covering 20 percent of Elgin. Surface textures include fine sandy loam across 35 percent, clay loam across 29 percent and clay across 28 percent. About 40 inches below the surface, the survey maps clay across 81 percent and clay loam across 18 percent; the average clay content at that depth is 46 percent. That clay can stick to a reamer and swell around pipe, so we plan fluid use and reaming to keep the hole workable.

USDA soil survey, inside the Elgin city limitsWhat is mapped
Soil series mappedBehring 20 percent, Crockett 20 percent, Edge 15 percent, Heiden 15 percent and Wilson 8 percent
Texture at the surfacefine sandy loam 35 percent, clay loam 29 percent and clay 28 percent
Texture about 40 inches downclay 81 percent and clay loam 18 percent
Engineering class about 40 inches downfat clay (CH) 76 percent and lean clay (CL) 23 percent
Average clay content about 40 inches down46 percent
Bedrock mapped within 60 inches23 percent of the area (0 percent hard rock, 23 percent weathered rock)
Seasonal water table within 60 inches5 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel82 percent of the area

The USDA soil survey maps bedrock within 60 inches across 23 percent of Elgin, with typical depth at 52 inches; the mapped bedrock is weathered, not hard bedrock. Seasonal water tables occur within 60 inches across 5 percent, so pits in those areas may need pumping. Flood prone soils cover 5 percent, which calls for careful depth planning near Elm Creek. High steel corrosion risk is mapped across 82 percent, so the line owner selects protection for steel casing or tracer wire; HDPE is not affected by that soil concern. The mapped Midway Group, undivided, is Paleocene age and includes clay, sand, silt and limestone.

What does it take to bore through Elgin clay?

Elgin’s clay rich soil can stay open but cling to the reamer and pipe. Near Avenue C or Elm Creek, we tune the fluid and reaming plan to the ground and keep the route clear of marked utilities.

  1. In Elgin’s heavy clay, we adjust drilling fluid and ream in stages so sticky cuttings do not build up on the reamer or grip the pipe.
  2. Before drilling near Avenue C, we hydrovac each marked utility on the route; paint shows its position, not its depth.
  3. Along US 290 pavement, we keep fluid pressure controlled so returns do not lift the surface, and we track depth and pitch as the bore advances.
  4. For a crossing near Elm Creek, we plan the bore below the channel and check for Corps jurisdiction during the route review.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

Where might a line go under US 290 in Elgin?

US 290 has 11.7 mapped roadway miles inside Elgin, with Texas State Highway 95 adding 6.3 miles and FM 1100 adding 2.3. A crossing beneath US 290 needs a route planned for the highway right of way and its pavement. Avenue C runs 3.0 miles in the city, County Line Road 2.95 miles and Avenue F 2.3 miles. Those streets can shape where entry and exit pits fit without opening the road surface.

CrossingTypeMapped extentWho has a say
US 290US highway11.7 roadway miles insideState highway office
US 290 BusinessUS highway1.5 roadway miles insideState highway office
Texas State Highway 95State highway6.3 roadway miles insideState highway office
FM 1100State highway2.3 roadway miles insideState highway office
Loop 109State highway2.2 roadway miles insideState highway office
FM 1704State highway1.8 roadway miles insideState highway office
FM 3000State highway0.8 roadway miles insideState highway office
Union PacificRailroad2.95 track miles insideThe railroad
Austin Western RailroadRailroad2.49 track miles insideThe railroad
Elm CreekStream1.83 channel miles insideChecked for Corps of Engineers jurisdiction
Little Sandy CreekStream0.21 channel miles insideChecked for Corps of Engineers jurisdiction
Dry CreekStream0.15 channel miles insideChecked for Corps of Engineers jurisdiction
Willow CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Burlson CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 2.95 track miles in Elgin, and Austin Western Railroad has 2.49. Public mapping shows 24 street and rail crossings in the city, so a route near either railroad needs its track owner identified. Elm Creek runs 1.83 channel miles, with Little Sandy Creek and Dry Creek also mapped. Six street crossings of named streams are mapped, so creek work needs a channel specific plan. No lakes or ponds are listed within one mile.

Who approves a bore in Elgin and Bastrop County?

Avenue C and County Line Road are city streets because Elgin is incorporated. Work in the right of way of US 290, Texas State Highway 95 or FM 1100 needs a TxDOT utility permit, reviewed by the Austin District. The utility owner files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the owner’s permit. For highway crossings, electric and communication lines need 60 inches of cover below the lowest crossed grade, while water lines need 60 inches and pressurized sewer lines need 60 inches. A crossing of Union Pacific or Austin Western Railroad needs an agreement with that track owner. Elm Creek planning includes a check for Corps jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns lines near the City of Elgin water system?

The City of Elgin public water system uses groundwater wells and serves 13,188 people through 4,692 service connections. For electric service in Bastrop County, Oncor Electric Delivery Company, Bluebonnet Electric Cooperative and Fayette Electric Cooperative report service. We confirm the specific line owner before a conduit bore on Avenue F or another Elgin route, so the conduit plan matches the owner’s requirements.

Line ownerWhat it isSourceSize
City of ElginPublic water systemGroundwater wells4,692 connections, 13,188 people served
Oncor Electric Delivery Company, Bluebonnet Electric Cooperative and Fayette Electric CooperativeElectric utilities reporting service in Bastrop County and Travis CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Elgin’s median housing year at 1979; 24 percent of homes were built before 1960, and 35 percent in 2000 or later. A replacement bore near Main Street may meet older buried lines, while a newer Avenue C service may need a fresh route. We hydrovac expose marked utilities before drilling near them, since surface marks do not show depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Where is Elgin near McDade?

Elgin lies in Bastrop and Travis counties, covers 7.18 square miles and sits at elevation 545 feet. Its ZIP code is 78621. McDade is 9.8 miles southeast, Coupland is 7.1 miles north and Manor is 9.9 miles west. Bastrop, the county seat, is 17.4 miles south; the nearest larger city listed is Pflugerville, 14.1 miles northwest. Elgin is 389 road miles and a 7.7 hour drive from our Yukon, Oklahoma main office, which is part of planning crew mobilization.

Places near Elgin

What kinds of bores come up near Elgin’s Elm Creek?

  • Highway crossing: A bore beneath US 290 keeps the route below pavement, with the utility owner’s TxDOT permit setting the permitted plan.
  • Water service: A new connection can tie toward the City of Elgin groundwater system without cutting across Avenue C.
  • Fiber route: Conduit along Avenue F can connect services while avoiding an open trench through the street.
  • Creek crossing: A route below Elm Creek needs channel depth planning and a jurisdiction check during planning.
  • Rail crossing: A bore beneath Union Pacific or Austin Western Railroad needs the track owner’s agreement for the crossing details.
  • Street replacement: A bore near Main Street can replace a buried line while leaving the pavement uncut.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for an Elgin bore near Main Street?

Send an address or map pin, such as a point near Main Street or Avenue F. Tell us what goes in the ground, such as water or fiber, and give the pipe or conduit size. Add the footage and a sketch or plans if you have them. A route near US 290 helps us spot highway and pavement issues early.

The Behring clay loam and clay mapped around Elgin make ground conditions the first pricing factor because sticky cuttings can affect fluid and reaming. Next, the pipe or conduit size and bore length set the work scope. Crossings of US 290, a railroad or Elm Creek can add planning and exposure work. Pavement, pits, excavator time and sand backfill also matter. The 389 road miles from Yukon affect mobilization, and urgent or high profile work can change the scope.

Questions people ask about boring in Elgin

Does Trinity take directional boring work in Elgin and Bastrop County?

Yes. We take directional boring work across Texas, including routes in Elgin and Bastrop County. The job is staffed by our own crews and from satellite yards run by partner drilling contractors we have vetted. We stay involved from the first call through the bore log, whether the route is near Avenue C or US 290.

Who owns electric lines in Elgin and Bastrop County, and who confirms conduit specs?

Electric service reporters for Bastrop County include Oncor Electric Delivery Company, Bluebonnet Electric Cooperative and Fayette Electric Cooperative. That does not establish which company owns a line at a particular Avenue F address. We identify the line owner for the specific route before planning a conduit bore, then use that owner’s requirements for the conduit.

Who controls Elgin streets like Avenue F, and does a bore require cutting them?

Elgin is incorporated, so Avenue F and other city streets belong to the city. Directional boring can pass beneath a street without cutting the pavement, with pits placed in dirt on either side where the site allows. A route crossing US 290 is different because TxDOT controls its highway right of way.

How old are buried lines near Elgin’s County Line Road, and can they be replaced by bore?

The American Community Survey 2019 to 2023 five year estimates put the median housing year at 1979, with 24 percent of homes built before 1960. Those figures do not date buried lines, but they show why replacement routes near County Line Road may encounter older utilities. We expose marked lines before the drill approaches them.

Does Elgin’s Behring soil corrode steel, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk across 82 percent of Elgin, including areas with Behring soil. HDPE is not affected by that soil corrosion concern. The line owner chooses any needed protection for steel casing or tracer wire, so we confirm the material requirements before the bore near Avenue C.

What ground is under Elgin near Behring soil about 40 inches down?

The USDA soil survey maps clay across 81 percent of Elgin at about 40 inches below the surface and clay loam across 18 percent. Behring is one of the leading mapped soil series. This clay can cling to the reamer and swell around pipe, so staged reaming and suitable fluid matter on routes near Elm Creek.

Can I reach Trinity after hours about an urgent bore on Elgin’s Avenue F?

Yes. A person answers the Trinity phone 24 hours a day, and we provide emergency response for urgent work near Avenue F or another Elgin route. The address or map pin, what needs to go in the ground and the pipe or conduit size help us understand the call and the likely route constraints.

How much notice does Texas811 need for a bore near Elgin’s Avenue C, and what if marks move?

For a bore along Avenue C, the locate request goes to Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the original notice, make a new request. Have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of a directional bore under Elgin’s US 290?

The price depends on the scope, starting with ground conditions: Elgin’s clay can affect fluid and reaming. Pipe size and length matter, as do highway or railroad crossings, pavement, creek work, pits and excavator time. The 389 road miles from Yukon affect mobilization. A route under US 290 also needs the utility owner’s permit plan.

Where the Elgin facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Elgin

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Elgin, Texas

Type the address of your job in Elgin. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Elgin

County: Travis County directional boring. Same county: Bastrop · Smithville · Wyldwood · Circle D-KC Estates · Cedar Creek · Paige · Red Rock · Rosanky · Austin · Lakeway · Leander · Wells Branch. All counties: Texas county list.