trinityboringsolutions.com

Richards Texas Directional Boring: Annona Soil, FM 1486 and BNSF Railway

Quick Answer: We do directional boring, also called horizontal directional drilling (HDD), in Richards for routes near BNSF Railway. Richards is 401 road miles from our Yukon main office, and our own crews and vetted partner contractor yards handle work along FM 1486. Annona soil is common here, and clay at depth can cling to the reamer and grip pipe. That calls for controlled fluid and staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Richards bores at a glance

  • Unincorporated community in Grimes County, Texas. Population 184 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 401 miles, about 8 hours of driving.
  • Ground: Annona soil is mapped on 37 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 1486, FM 149 and FM 2819. State permit office: TxDOT Bryan District.
  • Railroad track inside the boundary: BNSF Railway.
  • Public water: Richards Water System, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near FM 1486 in Richards?

We take directional boring work in Richards, an unincorporated community in Grimes County. The 2020 Census counted 184 residents; the Census Bureau does not publish yearly estimates for unincorporated places. Along FM 1486 and streets such as Pearl Road, we install water, sewer, gas, electric conduit and fiber lines. The route and the line type help us plan the bore.

Our main office is in Yukon, Oklahoma, and Richards work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of directional boring have taught us to account for Richards clay when choosing fluid and reaming steps. Our family business started in 1965, and we stay involved from the first call through the bore log.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Annona soil mean for a bore in Richards?

The USDA soil survey maps Annona soil series across 37 percent of Richards, with Frelsburg at 27 percent. Annona fine sandy loam map units cover 18 percent, and an eroded version covers 10 percent. Surface textures are mapped as fine sandy loam across 41 percent and clay across 35 percent. At about 40 inches below the surface, clay is mapped across 57 percent, with an average clay content of 48 percent. In Richards, we treat these mapped patterns as planning guidance, not test borings, before setting a directional boring path. The clay can become sticky on the reamer.

USDA soil survey, inside the Richards mapped community boundaryWhat is mapped
Soil series mappedAnnona 37 percent, Frelsburg 27 percent, Huntsburg 13 percent, Latium 7 percent and Gowker 5 percent
Texture at the surfacefine sandy loam 41 percent, clay 35 percent and loamy fine sand 16 percent
Texture about 40 inches downclay 57 percent, clay loam 24 percent and sandy clay 13 percent
Engineering class about 40 inches downfat clay (CH) 85 percent and lean clay (CL) 15 percent
Average clay content about 40 inches down48 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches41 percent of the area
Flood prone soils10 percent of the area
High corrosion risk for uncoated steel96 percent of the area

Bedrock is not mapped in the top five feet of Richards, which does not rule out deeper rock. The USDA soil survey maps a seasonal water table within 60 inches across 41 percent of the area, so pits may need pumping. Flood prone soils cover 10 percent. Across Richards, high steel corrosion risk is mapped across 96 percent, so we consider casing and tracer wire materials for the line owner. The Cenozoic Massive clay decomposition residuum includes smectitic clay that swells when wet and shrinks when dry.

How do we bore Richards clay without losing control of the hole?

Richards has sticky clay at depth and a seasonal water table mapped across 41 percent of the area. We adapt the drilling fluid and the sequence of reaming to those conditions, then keep the route checked as the bore advances.

  1. The USDA survey maps clay across 57 percent of Richards at about 40 inches, so we use thinner fluid and polymer to reduce sticky buildup on the reamer.
  2. Where the Richards clay holds the hole open, we still ream in stages and have the pipe ready to pull the same day the hole is opened.
  3. With a seasonal water table mapped across 41 percent of Richards, we plan smaller pits and pumping where water collects.
  4. For a route near FM 1486, we track the drill head from the surface and record depth and pitch as the bore advances.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

What is in the way of a new line near Lake Creek in Richards?

FM 1486 runs 3.1 roadway miles inside the mapped community boundary. FM 149 accounts for 1.7 miles, and FM 2819 for 0.6 miles. Pearl Road is the longest named street at 1.45 miles, followed by Colorado Street at 0.68 miles and Horse Apple Lane at 0.49 miles. Trinity Street runs 0.46 miles. A route under one of these roads can keep pavement intact, but a state highway bore needs its own depth and permit planning.

CrossingTypeMapped extentWho has a say
FM 1486State highway3.1 roadway miles insideState highway office
FM 149State highway1.7 roadway miles insideState highway office
FM 2819State highway0.6 roadway miles insideState highway office
BNSF RailwayRailroad2.41 track miles insideThe railroad
Lake CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Flagtail CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Garretts CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

BNSF Railway has 2.41 track miles inside Richards, on its Houston subdivision. Public mapping shows no street and rail crossings inside the community, but a proposed route still needs to be checked against the tracks. Lake Creek touches the mapped boundary; Flagtail Creek is 0.2 miles away. Richards has 5.76 miles of unnamed drainage, and no street crossings of named streams are mapped inside the community.

Do I need a permit to bore near Grimes County roads in Richards?

Richards is unincorporated, so it has no city government to permit its streets; the county or state has authority according to the road involved. Work in FM 1486, FM 149 or FM 2819 right of way needs a TxDOT utility permit reviewed by the Bryan District. The utility owner files in TxDOT’s online RULIS system, and we prepare the bore plan and profile for that filing. For an electric or communication line crossing a state highway, the rules call for 60 inches of cover below the lowest crossed grade; water crossings also need 60 inches. A BNSF Railway crossing requires an agreement with the railroad, and Lake Creek is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near Richards Water System?

Richards Water System is privately owned and uses groundwater wells. Public records list 130 service connections and 200 people served in Richards, figures we account for when planning underground work. For electric service in Grimes County, Entergy Texas, Mid-South Electric Cooperative Association and San Bernard Electric Cooperative report to the EIA. We confirm the line owner for the specific address before planning a conduit bore, since those county reports do not identify the provider at every address.

Line ownerWhat it isSourceSize
Richards Water SystemPublic water systemGroundwater wells130 connections, 200 people served
Entergy Texas, Mid-South Electric Cooperative Association and San Bernard Electric CooperativeElectric utilities reporting service in Grimes CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Richards’ median housing year at 1984. The estimates show 15 percent of homes built before 1960, 68 percent from 1960 to 1999 and 17 percent in 2000 or later. That mix can mean either replacement work or new services along Pearl Road. We hydrovac pothole every marked utility on a bore path before drilling near it; for a proposed line under Trinity Street, paint shows position but not depth, so we expose the line to verify it.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

What is near Richards and Navasota for a boring project?

Richards is an unincorporated community in Grimes County, at an elevation of 315 feet and covering 1.82 square miles. Its ZIP code is 77873. Shiro is 5.3 miles northwest, Anderson is 9.0 miles west, Montgomery is 13.4 miles southeast, and Plantersville is 13.9 miles south. Anderson is the county seat, while Navasota is the nearest larger city, 17.6 miles southwest. Our Yukon yard is 401 road miles away, an 8.0 hour drive, so distance is part of planning a Richards mobilization.

Places near Richards

What boring work comes up along Horse Apple Lane in Richards?

  • Highway crossing: A water or communication line under FM 1486 needs a planned bore beneath the highway pavement and its travel lanes.
  • Water service: A connection near Richards Water System can follow a route under Pearl Road, with the existing line exposed before drilling nearby.
  • Fiber route: Fiber conduit along Colorado Street can be bored to avoid cutting the roadway and driveways.
  • Rail crossing: A proposed utility route under BNSF Railway needs coordination around its track and the railroad crossing agreement.
  • Creek crossing: A route near Lake Creek needs channel planning and a check for U.S. Army Corps of Engineers jurisdiction.
  • Acreage service: A longer service near Horse Apple Lane can be planned around Richards clay and the marked utilities along its path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Richards quote near Trinity Street?

For a Richards quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near Trinity Street may need a different plan from one under FM 1486. The Annona and Frelsburg soil patterns help us ask the right questions about the route.

The 401 road miles from Yukon affect mobilization for Richards work. Then we look at the clay mapped below the surface, the pipe or conduit size and bore length. A route under FM 1486 or near BNSF Railway adds crossing details to check. The count of utilities to expose, pavement, drainage, pits, excavator time and sand backfill can also change the scope. High profile or emergency work needs its own planning.

Questions people ask about boring in Richards

Does Trinity Boring Solutions take jobs in Richards, Grimes County, and how are crews assigned?

Yes. We take directional boring work in Richards, Grimes County, and staff it with our own crews or crews from partner drilling contractors Trinity has vetted. FM 1486 is one local route we can plan around. For Richards planning, we work with Trinity from the first call through the bore log, regardless of which crew is on site.

Who approves a bore under FM 1486 in Richards?

TxDOT reviews a utility permit for work in FM 1486 right of way through its Bryan District. The utility owner submits the application in TxDOT’s RULIS system, and we prepare the bore plan and profile for the owner. The cover depth depends on line type, with the permit able to set a different depth.

What does a Richards bore under BNSF Railway require us to account for when planning the crossing?

A bore under BNSF Railway needs an agreement from the railroad that owns the track. That agreement addresses the crossing conditions, including casing, depth and flagging. BNSF has 2.41 track miles inside Richards, so we check the proposed route against the mapped track before setting the bore plan.

Can you bore a Richards utility line under Lake Creek?

A bore under Lake Creek can be planned, but the route and channel conditions need review. The creek touches the mapped Richards boundary, and a water crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. We would also look at the approach and the nearby drainage before setting the bore path.

Who runs the water system in Richards, and where does its water come from?

Richards Water System is privately owned and draws water from groundwater wells. Public records list 130 service connections and 200 people served in Richards, figures we account for when planning underground work. Those figures help identify the system, but the specific buried line along Pearl Road still needs to be located and exposed before a nearby bore.

Which electric providers report service in Richards, Grimes County?

Entergy Texas, Mid-South Electric Cooperative Association and San Bernard Electric Cooperative report electric service in Grimes County. The report does not tell us which provider serves every Richards address. We confirm the line owner before planning electric conduit, including on a route near FM 149.

Does Trinity cover Shiro and rural sites outside Richards?

Yes. We take work in Texas beyond Richards, including nearby Shiro and rural sites outside the mapped community boundary. Shiro is 5.3 miles northwest of Richards. The route, access and distance from our Yukon office help determine how to staff and plan a job there.

How much notice does Texas811 need for a Richards bore near Pearl Road?

For excavation near Pearl Road, submit the Texas811 locate request at least 48 hours before work begins, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If work slips more than 14 days past the original notice, make a new request. Before work continues in Richards, we refresh worn or moved marks through Texas811 to keep the marked route current.

What affects the cost of directional boring under FM 1486 in Richards?

The job scope determines the price, not one local feature alone. For a bore under FM 1486, we consider length, line size, clay conditions, pavement and utilities to expose. A BNSF Railway or drainage crossing can add planning needs, and the 401 road miles from Yukon affect mobilization. Pits, excavator time and backfill also matter.

Where the Richards facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Richards

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Richards, Texas

Type the address of your job in Richards. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Richards

Same county: Bedias · Iola · Todd Mission. All counties: Texas county list.