trinityboringsolutions.com

Santo Texas Directional Boring: Soil, Union Pacific And Big Sunday Creek

Quick Answer: Can a line pass beneath FM 2201, the Union Pacific track or Big Sunday Creek without cutting the surface? Yes: Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for Santo, Texas crossings like these. Santo is 269 road miles from our Yukon, Oklahoma main office, so the route is part of planning. USDA maps Santo soil with sandy clay loam below the surface, which can grip pipe and calls for a controlled drilling plan.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Santo bores at a glance

  • Unincorporated community in Palo Pinto County, Texas. Population 347 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 269 miles, about 5.3 hours of driving.
  • Ground: Santo soil is mapped on 22 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 22 percent of the area.
  • Highways inside the boundary: FM 2201, FM 129 and FM 4. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: Union Pacific, with 2 mapped street and rail crossings.
  • Named streams inside the boundary: Big Sunday Creek.
  • Public water: Santo Special Utility District, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone do directional boring under FM 2201 in Santo?

Trinity Boring Solutions takes directional boring work in Santo, Texas, including routes beneath FM 2201 and the Union Pacific track. Santo is an unincorporated community in Palo Pinto County. The 2020 Census count was 347; the Census Bureau does not publish yearly estimates for unincorporated places such as Santo. We install water, sewer, gas, electric conduit and fiber for services along Palo Pinto Street and crossings at FM 129 or FM 4.

Our main office is in Yukon, Oklahoma, and Santo work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We handle lines from 3/4 inch service lines to 48 inch casing, from service bores along Palo Pinto Street to larger casing work beneath routes such as FM 2201. Trinity is a family business started in 1965 and has done directional boring since 1982, experience that spans small services and larger Santo crossings.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does the Santo soil survey show about ground in Santo, Texas?

The USDA soil survey maps Santo and Bunyan soils across 22 percent of Santo, often on frequently flooded ground with 0 to 1 percent slopes. At about 40 inches, sandy clay loam is mapped under 29 percent of the area, while clay loam covers another 24 percent. Near the surface, fine sandy loam is mapped across 78 percent. These are mapped patterns, not test borings. The mix means a route near Big Sunday Creek may need a different fluid and reaming plan from a route on higher ground.

USDA soil survey, inside the Santo mapped community boundaryWhat is mapped
Soil series mappedSanto 22 percent, May 19 percent, Minwells 17 percent, Bastrop 10 percent and Truce 10 percent
Texture at the surfacefine sandy loam 78 percent, very fine sandy loam 9 percent and clay loam 7 percent
Texture about 40 inches downsandy clay loam 29 percent, clay loam 24 percent and loamy fine sand 22 percent
Engineering class about 40 inches downlean clay (CL) 47 percent, silty clayey sand (SC SM) 22 percent and clayey sand (SC) 19 percent
Average clay content about 40 inches down26 percent
Bedrock mapped within 60 inches22 percent of the area (0 percent hard rock, 22 percent weathered rock)
Seasonal water table within 60 inches3 percent of the area
Flood prone soils29 percent of the area
High corrosion risk for uncoated steel25 percent of the area

Weathered bedrock is mapped within 60 inches across 22 percent of Santo, with typical bedrock depth at 42 inches; hard bedrock is not mapped within that depth. The Holocene Alluvium along streams includes sand, silt, clay and gravel, while the map also shows Bashkirian sedimentary rock. Seasonal water tables are mapped within 60 inches across 3 percent, and flood prone soils across 29 percent, so creek side pits need planning. High steel corrosion risk covers 25 percent, a concern for casing and tracer wire materials.

How do crews bore sandy clay loam in Santo, Texas?

For Santo’s sandy clay loam and clay loam, we adjust fluid and reaming to keep the hole stable without forcing ground upward near FM 2201 pavement. The route and nearby utilities guide the setup.

  1. With sandy clay loam mapped at about 40 inches in Santo, we tune fluid and ream in stages to limit sticky cuttings around the tool.
  2. Where Santo’s soil survey maps gravel in Holocene Alluvium near Big Sunday Creek, we check depth and pitch at each rod to keep the head on line.
  3. Before a bore near Santo Special Utility District water lines or electric conduit on Palo Pinto Street, we pothole marked utilities to verify their depth.
  4. For a route beside flood prone Santo and Bunyan soils, we plan pits outside the channel area and track the drill head from the surface.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

What might a Santo bore cross near Union Pacific tracks?

Santo bores may pass beneath FM 2201, FM 129 or FM 4, all state highways mapped inside the community. Palo Pinto Street is the longest named street at 1.39 miles, followed by Panama Road at 0.94 miles and Petty Road at 0.86 miles. The mapped community has 9.94 public road centerline miles. A bore can keep pavement and driveways intact, but the route still needs to account for roadway width, access pits and marked lines.

CrossingTypeMapped extentWho has a say
FM 2201State highway1.1 roadway miles insideState highway office
FM 129State highway1 roadway miles insideState highway office
FM 4State highway0.7 roadway miles insideState highway office
Union PacificRailroad1.86 track miles insideThe railroad
Big Sunday CreekStream2.81 channel miles insideChecked for Corps of Engineers jurisdiction
Palo Pinto CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific owns 1.86 track miles inside Santo, on the Union Pacific Baird Subdivision. Public mapping shows 2 street and rail crossings, so a route near the tracks needs railroad coordination. Big Sunday Creek runs for 2.81 channel miles inside the community, and 2 mapped street crossings cross named streams. No lakes or ponds are mapped within one mile. Creek routes need depth and pit planning around flood prone ground.

Do I need a permit for a bore in Santo, Palo Pinto County?

Santo has no city government, so its streets are under county or state authority rather than a municipal street office. For work in the right of way of FM 2201, FM 129 or FM 4, the utility owner applies for a TxDOT utility permit through RULIS; TxDOT’s Fort Worth District reviews it. We prepare the bore plan and profile and work under the permit issued to the utility owner. A crossing of Union Pacific track also needs an agreement from the railroad, with its terms setting crossing details. Big Sunday Creek is checked during planning for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns lines near Santo Special Utility District in Santo?

Santo Special Utility District is a local government water system using purchased surface water, with 1,182 service connections serving 3,546 people. Before a water service bore near Palo Pinto Street, confirm the district’s line location and the line owner. Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and United Electric Cooperative Service report electric service in Palo Pinto County; confirm the owner at the address before planning an electric conduit bore.

Line ownerWhat it isSourceSize
Santo Special Utility DistrictPublic water systemSurface water bought from another system1,182 connections, 3,546 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Palo Pinto CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Santo’s median housing year at 1990; 49 percent of housing units were built before 1960, and 51 percent from 1960 to 1999. That age mix can mean replacement work as well as new service routes along Panama Road. Before drilling near an existing water or electric line, we use hydrovac potholing to expose marked utilities; paint shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

What is near Santo, including Gordon?

Santo is an unincorporated community in Palo Pinto County, at 819 feet elevation, covering 1.2 square miles in ZIP code 76472. Brazos is 6.5 miles northeast, Gordon is 9.8 miles southwest, and Lipan is 11.4 miles southeast. Palo Pinto, the county seat, is 12.7 miles northwest; Mineral Wells is 17.0 miles northeast. From our Yukon yard, Santo is 269 road miles and a 5.3 hour drive, which affects how we plan crew and equipment mobilization for a job near FM 4 or Big Sunday Creek.

Places near Santo

What boring work comes up on Palo Pinto Street in Santo?

  • Highway crossing: A bore beneath FM 2201 keeps the line below existing pavement, with the utility owner handling the TxDOT permit.
  • Water service: A connection near Palo Pinto Street needs the Santo Special Utility District line location confirmed before we set the bore path.
  • Fiber route: A conduit bore along Panama Road can avoid opening the roadway while accounting for marked utilities along the route.
  • Creek crossing: A line beneath Big Sunday Creek needs a depth plan for the channel and review for possible federal jurisdiction.
  • Rail crossing: A route beneath Union Pacific track needs the railroad’s agreement and its crossing conditions before drilling.
  • Street service: A bore near Petty Road can place water, sewer or electric conduit without cutting the street surface.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Santo bore near Big Sunday Creek?

For a quote on a Santo route near Big Sunday Creek, send the address or map pin, what will go underground, pipe or conduit size, footage, and any sketch or plans. The creek’s mapped channel and nearby flood prone soils can change the entry and exit pit plan, so mark the intended crossing and access points.

Santo is 269 road miles from Yukon, so mobilization is part of the job scope. The Santo soil mix and weathered bedrock can affect drilling time, while a route under FM 2201 or Union Pacific track adds crossing coordination. Length, pipe or conduit size, utilities to expose, pavement or concrete, creek drainage, pit work, excavator time and sand backfill all matter. High profile or emergency work can also affect the plan.

Questions people ask about boring in Santo

Does Trinity take directional boring jobs in Santo, Palo Pinto County, and who staffs them?

Yes, we take directional boring work in Santo, Palo Pinto County. Our crews do the work, with partner contractor yards supporting service as needed. You work with Trinity from the first call through the bore log, whether the crew is working near FM 2201 or another Santo route.

Who owns electric lines in Santo, Palo Pinto County, and who confirms conduit specs?

The electric line owner depends on the Santo address. Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and United Electric Cooperative Service report service in Palo Pinto County. We confirm the owner and conduit requirements before planning a bore near Santo Special Utility District water lines or along Palo Pinto Street.

Who is responsible for Petty Road in Santo, and can a bore avoid cutting it?

Santo has no city government, so Petty Road is under county authority rather than a city street office. Directional boring can carry a line below the road without cutting the surface. The route still needs utility locating and potholing before the drill approaches marked lines.

Do older homes near Panama Road in Santo mean replacement lines need boring?

They can mean replacement work is part of the job mix, but housing age alone does not establish a buried line’s condition. ACS estimates put Santo’s median housing year at 1990, with 49 percent of units built before 1960. A bore near Panama Road can replace a line without opening the street.

Are bore pits near Big Sunday Creek in Santo affected by water or flooding?

They can be. The USDA soil survey maps flood prone soils across 29 percent of Santo and seasonal water tables within 60 inches across 3 percent. Near Big Sunday Creek, we plan pit placement and crossing depth around the channel and check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.

Does Santo soil in Santo corrode steel, and what pipe should I use?

High steel corrosion risk is mapped across 25 percent of Santo, which can matter for steel casing or tracer wire. HDPE does not have the same soil corrosion concern. The line owner chooses the materials and coatings for the job, including a route near Santo and Bunyan soils.

Can I reach Trinity after hours about an urgent bore near Petty Road in Santo?

Yes, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. For an urgent issue near Petty Road or FM 129, call and explain the location, the line involved and what has happened so we can assess the response.

How early should I request a Santo locate near Palo Pinto Street, and what if marks move?

Texas811 needs the locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. For work by Palo Pinto Street, request refreshed marks through Texas811 if paint wears off or moves; a new notice is needed if the start slips more than 14 days past the original notice.

What affects the cost of a directional bore under FM 2201 in Santo?

The scope sets the price: the 269 road miles from Yukon, Santo’s soil and weathered bedrock, and any FM 2201 or Union Pacific crossing all affect planning. Length, pipe size, utility exposure, pavement, creek drainage, pits, excavator time, backfill and emergency timing also shape the work.

Where the Santo facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Santo

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Santo, Texas

Type the address of your job in Santo. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Santo

Same county: Graford · Strawn. All counties: Texas county list.