trinityboringsolutions.com

Strawn Texas Directional Boring: Minwells Soil, Highway 16 and Union Pacific

Quick Answer: Need a line beneath Union Pacific track or North Fork Palo Pinto Creek without opening the surface? Trinity Boring Solutions uses directional boring, also called horizontal directional drilling (HDD), for Strawn, Texas crossings such as Texas State Highway 16. Strawn is 289 road miles from our Yukon, Oklahoma main office, and that distance matters for mobilization around Grant Avenue. Minwells fine sandy loam covers 35 percent of town, while clay loam at depth can grip pipe, so reaming and pull timing matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Strawn bores at a glance

  • Incorporated city in Palo Pinto County, Texas. Population 571 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 289 miles, about 5.6 hours of driving.
  • Ground: Minwells soil is mapped on 35 percent of the area, with clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 12 percent of the area.
  • Highways inside the boundary: Texas State Highway 16, FM 2372 and Texas State Highway 108. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: Union Pacific, with 5 mapped street and rail crossings.
  • Named streams inside the boundary: North Fork Palo Pinto Creek.
  • Public water: City of Strawn, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring under Texas State Highway 16 in Strawn?

Trinity Boring Solutions takes directional boring work in Strawn, where Texas State Highway 16 and the Union Pacific track give utility routes real crossings to plan around. Can you get a line beneath those features without cutting the surface? We plan bores for Strawn in Palo Pinto County, whose population is 571, according to the Census Bureau Vintage 2024 estimate. Water, sewer, gas, electric conduit and fiber can run beneath Grant Avenue or other local streets.

Our main office is in Yukon, Oklahoma, and Strawn work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965 and has done directional boring since 1982; the range from 3/4 inch service lines to 48 inch casing can suit a short Grant Avenue service or a larger crossing.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What is Strawn soil like to bore through Minwells soil?

Minwells soil is the largest mapped soil series in Strawn, covering 35 percent of the city, and the USDA soil survey also maps Thurber across 32 percent. The survey shows clay loam over 48 percent of the surface, while fine sandy loam accounts for 46 percent. At about 40 inches, clay loam is mapped across 51 percent and clay across 44 percent; the mapped soil classification is mostly CL, with CH also present. Those clay layers can stay open during drilling but may stick to the reamer and grip pipe, so bore timing matters.

USDA soil survey, inside the Strawn city limitsWhat is mapped
Soil series mappedMinwells 35 percent, Thurber 32 percent, Bosque 16 percent, Truce 11 percent and Leeray 4 percent
Texture at the surfaceclay loam 48 percent, fine sandy loam 46 percent and clay 4 percent
Texture about 40 inches downclay loam 51 percent, clay 44 percent and silty clay 4 percent
Engineering class about 40 inches downlean clay (CL) 62 percent and fat clay (CH) 37 percent
Average clay content about 40 inches down37 percent
Bedrock mapped within 60 inches12 percent of the area (0 percent hard rock, 12 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils16 percent of the area
High corrosion risk for uncoated steel48 percent of the area

The USDA soil survey maps bedrock within 60 inches across 12 percent of Strawn, described as weathered bedrock; typical depth is 39 inches. Seasonal water table is not mapped within that depth, but flood prone soils cover 16 percent, which matters near North Fork Palo Pinto Creek. With high steel corrosion risk mapped across 48 percent in Strawn, we consider casing and tracer wire materials. The Mineral Wells Formation, of Moscovian age, includes shale, sandstone, conglomerate and limestone; ground conditions can change where a bore meets rock.

How do crews handle Strawn clay loam?

In Strawn, clay loam and Minwells fine sandy loam call for different fluid and reaming choices. We track the drill beneath local streets and adjust the plan to the ground rather than forcing the same approach everywhere.

  1. Minwells fine sandy loam covers 35 percent of Strawn, so we keep fluid and reaming suited to ground that can cave behind the drill.
  2. Clay loam and clay are common in the USDA survey around 40 inches, so we use staged reaming and plan to pull pipe promptly after opening the hole.
  3. Near North Fork Palo Pinto Creek, we plan the bore depth beneath the channel and check whether the crossing falls under Corps jurisdiction.
  4. Before drilling near a marked line by Grant Avenue, we expose it with hydrovac and track the drill head from the surface as depth and pitch are logged.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Where does a line have to go under Union Pacific in Strawn?

Strawn bores can cross Texas State Highway 16, FM 2372 or Texas State Highway 108, all mapped inside the city. Texas State Highway 16 has 1.6 roadway miles within the limits, so a route beneath its pavement needs boring or tunneling rather than open trenching. Front Street is the longest named street at 1.13 miles, followed by Walnut Street at 0.8 miles and Grant Avenue at 0.74 miles. Those street lengths help frame a route, but the exact crossing and utility positions still need to be checked.

CrossingTypeMapped extentWho has a say
Texas State Highway 16State highway1.6 roadway miles insideState highway office
FM 2372State highway0.4 roadway miles insideState highway office
Texas State Highway 108State highway0.4 roadway miles insideState highway office
Union PacificRailroad1.09 track miles insideThe railroad
North Fork Palo Pinto CreekStream0.87 channel miles insideChecked for Corps of Engineers jurisdiction
Palo Pinto CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Bills CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Gilmore CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 1.09 track miles in Strawn, and public mapping shows 5 street and rail crossings inside the city. A bore beneath its track needs a crossing agreement, with the railroad setting details such as casing, depth and flagging. North Fork Palo Pinto Creek runs 0.87 channel miles within Strawn, and 3 mapped street crossings cross named streams. Palo Pinto Creek and Bills Creek are each 0.2 miles from the city limits; creek work needs planning for the channel and a check for federal water jurisdiction.

Who has to sign off on a Strawn bore in Palo Pinto County?

For a Strawn crossing beneath Texas State Highway 16, Texas State Highway 108 or FM 2372, TxDOT’s Fort Worth District reviews the utility permit. Electric and communication lines need 60 inches of cover at a highway crossing and 48 inches along the right of way; water needs 60 inches at crossings and 36 inches along it, while pressurized sewer needs 60 inches at crossings. The utility owner, not the drilling contractor, files through TxDOT’s RULIS system. We prepare the bore plan and profile for that filing, and existing highway pavement is bored or tunneled beneath. On Strawn city streets, we recognize the city as owner before planning boring work. A Union Pacific crossing needs an agreement with the railroad, and North Fork Palo Pinto Creek is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near City of Strawn lines?

The City of Strawn public water system draws from surface water and serves 1,311 people through 442 service connections. That makes water line locations important when planning another service near Grant Avenue or Front Street. Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and United Electric Cooperative Service report electric service in Palo Pinto County. We confirm the line owner for the specific route before planning an electric conduit bore; countywide reports do not identify the provider at every address.

Line ownerWhat it isSourceSize
City of StrawnPublic water systemSurface water442 connections, 1,311 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Palo Pinto CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Strawn’s median housing year at 1965; 42 percent of homes were built before 1960, and 8 percent in 2000 or later. A replacement line along Walnut Street may need to work around older buried services, while a new connection can follow a different route. Before drilling near a marked utility, we expose it with hydrovac potholing. Paint shows position, not depth, so the exposed line helps establish safe clearance.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Do you cover Strawn, Mingus and nearby areas?

Strawn is in Palo Pinto County at an elevation of 1,004 feet, within 0.78 square miles, and uses ZIP code 76475. Mingus is 4.4 miles east; Gordon is 7.6 miles east, and Ranger is 11.8 miles southwest. Palo Pinto, the county seat, is 19.2 miles northeast, while Breckenridge is 28.0 miles northwest. Our Yukon, Oklahoma yard is 289 road miles away, a 5.6 hour drive. We take work in Strawn and across Texas, including rural sites near Mingus, with mobilization planned around the job location.

Places near Strawn

Which jobs call for a bore near Strawn’s Grant Avenue?

  • Highway crossing: A bore beneath Texas State Highway 16 avoids cutting its pavement, with the route planned to meet the TxDOT permit.
  • Water service: A new connection near the City of Strawn system can be routed beneath Grant Avenue after existing lines are exposed.
  • Fiber conduit: A conduit route along Front Street can pass beneath pavement without an open trench across the street.
  • Creek crossing: A line beneath North Fork Palo Pinto Creek needs a channel depth plan and a jurisdiction check during planning.
  • Rail crossing: A route beneath Union Pacific track needs a railroad crossing agreement covering the crossing details.
  • Replacement bore: Older services near Walnut Street may call for a replacement route that avoids marked utilities and pavement cuts.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Strawn’s Front Street?

For a Strawn quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. A route near Front Street or North Fork Palo Pinto Creek can change the equipment and crossing plan, so include those details if they are on the path. We can talk through the route before setting the scope.

The Strawn job sets the price, not a single footage figure. Length and pipe size matter, along with the Minwells and clay loam ground, rock, and how many utilities need to be exposed. A crossing beneath Texas State Highway 16 or Union Pacific track takes added crossing planning; North Fork Palo Pinto Creek can add creek work. Concrete or pavement, pits, excavator time and sand backfill also affect the scope. Mobilization reflects the 289 road miles from Yukon, and high profile or emergency work can require more planning.

Questions people ask about boring in Strawn

Does Trinity take directional boring jobs in Strawn and Palo Pinto County, and who staffs them?

Yes, we take directional boring work in Strawn and across Palo Pinto County. Our crews handle the work, with partner contractor satellite yards supporting jobs when needed; you work with Trinity from the first call through the bore log. Routes near Texas State Highway 16 or North Fork Palo Pinto Creek are planned around the actual crossing.

Who controls Grant Avenue in Strawn, and can a bore avoid cutting the street?

Grant Avenue is a city street because Strawn is incorporated. A directional bore can pass beneath pavement without an open cut, with pits placed in dirt on either side of the crossing. The route still needs to account for marked utilities along Grant Avenue before the drill gets close.

Do older homes near Walnut Street in Strawn mean old lines need replacement bores?

They can make replacement work a consideration, but housing age alone does not confirm a buried line’s condition. The American Community Survey 2019 to 2023 estimates put the median housing year at 1965, with 42 percent built before 1960. Near Walnut Street, we locate and expose marked utilities before planning a replacement route.

Are bore pits near North Fork Palo Pinto Creek in Strawn at risk from groundwater or flooding?

The USDA soil survey does not map a seasonal water table within 60 inches, but it maps flood prone soils across 16 percent of Strawn. North Fork Palo Pinto Creek therefore deserves specific attention when locating pits and setting bore depth. We plan to stay beneath the channel and check for Corps jurisdiction during planning.

Can Minwells soil in Strawn corrode steel casing, and what pipe should I use?

The mapped risk is worth considering: the USDA survey shows high steel corrosion risk across 48 percent of Strawn. The line owner chooses suitable casing or tracer wire materials for the job. HDPE is not affected by that soil corrosion concern, but the owner selects the pipe material for the line near Minwells soil.

What ground does a bore pass through in Strawn’s Minwells soil?

The USDA soil survey maps Minwells across 35 percent of Strawn and clay loam across 48 percent of the surface. At about 40 inches, clay loam covers 51 percent and clay 44 percent of the mapped area. Sticky clay can build on a reamer or grip pipe, so staged reaming and pull timing matter.

Will Trinity bore near Mingus or rural sites outside Strawn?

Yes, we take work around Mingus and at rural sites outside Strawn, as well as elsewhere in Texas. Mingus is 4.4 miles east of Strawn, and the route and ground at each address shape the bore plan. Send the site location and route details so we can consider access and mobilization.

How much 811 notice is needed for a bore on Front Street in Strawn, and what if marks move?

For Front Street work, Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. When our Strawn work start slips more than 14 days past the original notice, we make a new request. Before we continue work in Strawn, we have worn or moved marks refreshed through Texas811.

What affects the cost of a directional bore under Texas State Highway 16 in Strawn?

The scope sets the price: bore length and pipe size, clay or rock, utility exposures, pits, pavement, and creek or drainage crossings all matter. A Texas State Highway 16 crossing brings permit planning, while Union Pacific track or North Fork Palo Pinto Creek can add crossing needs. Mobilization also reflects the distance from Yukon.

Where the Strawn facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Strawn

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Strawn, Texas

Type the address of your job in Strawn. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Strawn

Same county: Mineral Wells · Graford · Palo Pinto · Brazos. All counties: Texas county list.