Seymour Texas Directional Boring: Miles Soil, US 82 and Seymour Creek
Quick Answer: US 82 and Seymour Creek are crossings to plan around; Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Seymour and across Texas. Seymour is 194 road miles from our Yukon, Oklahoma main office, so access near Frontage Road matters to mobilization. The USDA soil survey maps fine sandy loam across 43% of the city and sandy clay loam at about 40 inches across 33%. That mix calls for staged reaming to help keep a bore open.
Seymour bores at a glance
- County seat of Baylor County, Texas. Population 2,622 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 194 miles, about 3.8 hours of driving.
- Ground: Miles soil is mapped on 32 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 3 percent of the area.
- Highways inside the boundary: US 82, US 277, US 283, US 183 and Texas State Highway 114. State permit office: TxDOT Wichita Falls District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Seymour Creek and Plants Creek.
- Public water: City of Seymour, groundwater wells.
- Electric: City of Seymour municipal electric system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near Seymour Creek in Seymour?
US 82 and Seymour Creek are practical constraints for a utility route in Seymour, Baylor County. Trinity Boring Solutions takes directional boring work in Texas, including water, sewer, gas, electric conduit and fiber lines. Those lines can run beneath a street such as Main Street or cross a creek where the route requires it. The Census Bureau Vintage 2024 estimate puts Seymour’s population at 2,622, a compact service area where the exact address shapes the bore plan.
Our main office is in Yukon, Oklahoma, and Seymour work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We started as a family business in 1965 and have bored directionally since 1982. Four decades of boring mean we plan for the fine sandy loam and sandy clay loam mapped around Seymour rather than assuming each part of a route drills the same.

What does the soil survey show about Seymour ground and Miles soil?
The USDA soil survey maps Miles soil across 32% of Seymour and Enterprise across another 32%. Miles fine sandy loam, moist, covers 19% of the mapped area at 0 to 1 percent slopes, and another 14% is Miles fine sandy loam, moist, at 1 to 3 percent slopes. At about 40 inches below the surface, sandy clay loam is mapped under 33% of the city, while very fine sandy loam is mapped under 32%. These are mapped patterns, not test borings. The finer layers can make a bore respond differently from the looser surface soil.
| USDA soil survey, inside the Seymour city limits | What is mapped |
|---|---|
| Soil series mapped | Miles 32 percent, Enterprise 32 percent, Hardeman 10 percent, Chaney 9 percent and Clairemont 8 percent |
| Texture at the surface | fine sandy loam 43 percent, very fine sandy loam 32 percent and loamy fine sand 9 percent |
| Texture about 40 inches down | sandy clay loam 33 percent, very fine sandy loam 32 percent and fine sandy loam 10 percent |
| Engineering class about 40 inches down | clayey sand (SC) 43 percent, silt (ML) 32 percent and lean clay (CL) 17 percent |
| Average clay content about 40 inches down | 25 percent |
| Bedrock mapped within 60 inches | 3 percent of the area (0 percent hard rock, 3 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 8 percent of the area |
| High corrosion risk for uncoated steel | 17 percent of the area |
The USDA soil survey maps bedrock within 60 inches in 3% of Seymour, so bedrock is not mapped in the top five feet across most of the city. It maps no seasonal water table within 60 inches, but flood prone soils cover 8%; a Seymour Creek crossing still needs its depth planned for the channel. High steel corrosion risk is mapped under 17%, so the line owner should consider casing and tracer wire materials. The geologic map shows Calcareous Clay Disintegration Residuum of Quaternary age and Early Permian sedimentary rock. Clay and shale fragments can slow drilling or change steering as a bore reaches harder material.
How do we bore Seymour’s sandy clay loam?
Seymour’s sandy clay loam at about 40 inches and fine sandy loam near the surface call for a plan that holds the hole open without flooding it. We set the route, expose conflicts and match the reaming to the ground.
- Locate and pothole: Along Main Street, we expose marked utilities with hydrovac before drilling near them because paint shows position, not depth.
- Set the bore: In the fine sandy loam mapped across 43% of Seymour, we track the drill head from the surface and record depth and pitch as it advances.
- Ream for the ground: Where sandy clay loam is mapped at about 40 inches, staged reaming helps manage the hole before the pipe is pulled through.
- Finish the crossing: At Seymour Creek, we plan the route beneath the channel and check for Army Corps jurisdiction before selecting the bore path.

Where does a line have to go under US 82 in Seymour?
US 82, US 277, US 283 and US 183 run within Seymour, along with Texas State Highway 114, RM 1919 and FM 422. A bore crossing one of those routes has to fit the highway right of way and its permit conditions. Frontage Road is the city’s longest named street at 2.83 miles. California Street runs 2.06 miles, and Main Street runs 1.88 miles. Those long streets give a route planner specific corridors to check for access, existing lines and pavement before setting bore pits.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 82 | US highway | 3 roadway miles inside | State highway office |
| US 277 | US highway | 3 roadway miles inside | State highway office |
| US 283 | US highway | 2.7 roadway miles inside | State highway office |
| US 183 | US highway | 2.2 roadway miles inside | State highway office |
| Texas State Highway 114 | State highway | 3.3 roadway miles inside | State highway office |
| RM 1919 | State highway | 3.2 roadway miles inside | State highway office |
| FM 422 | State highway | 1.4 roadway miles inside | State highway office |
| Spur 334 | State highway | 0.3 roadway miles inside | State highway office |
| FM 2582 | State highway | 0.2 roadway miles inside | State highway office |
| Seymour Creek | Stream | 2.66 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Plants Creek | Stream | 0.58 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Brazos River | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Gray Creek | Stream nearby | 0.7 miles outside | Checked for Corps of Engineers jurisdiction |
| Little Rock Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Seymour or within one mile outside the city limits, so no local rail crossing is identified. Seymour Creek runs 2.66 channel miles within the city, and Plants Creek runs 0.58 miles. Public mapping shows 12 street crossings of named streams in Seymour. That makes creek and drainage locations part of route planning even when the bore is short. There are no lakes or ponds mapped within one mile of the city.
Whose permission does a Seymour bore in Baylor County need?
For a bore in the right of way of US 82, US 277, US 283, US 183 or another state route in Baylor County, the line owner files the TxDOT utility application through RULIS; the contractor does not file it. The Wichita Falls District reviews it. Trinity supplies the bore plan and profile for the utility owner’s application. TxDOT requires electric and communication lines to have 60 inches of cover at highway crossings and 48 inches along the right of way. Water lines need 60 inches at crossings and 36 inches along it; pressurized sewer crossings need 60 inches. Main Street and other city streets are controlled by the City of Seymour. Seymour Creek crossings are checked for Army Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the water and electric lines in Seymour, including the City of Seymour system?
The City of Seymour owns the public water system, which draws from groundwater wells and reports 2,403 service connections serving 2,576 people. The city also owns its municipal electric system, with 1,575 customers reported to EIA. Before a conduit bore near Main Street or another Seymour route, we identify and expose marked utilities so the drill does not rely on paint alone for depth. Hydrovac potholing can show the position of a water line or city electric conduit before the bore approaches it.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Seymour | Public water system | Groundwater wells | 2,403 connections, 2,576 people served |
| City of Seymour municipal electric system | City owned electric system | Reports to the U.S. Energy Information Administration | 1,575 customers reported |
| AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power and Tri-County Electric Cooperative | Electric utilities reporting service in Baylor County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Seymour’s median housing year at 1963. The estimates show 42% of housing units built before 1960, 55% built from 1960 to 1999, and 3% built in 2000 or later. On older routes such as California Street, replacement bores may have to work around buried lines installed in different eras, while a new service needs its own route. We pothole marked utilities before drilling near them.

Do you cover Seymour, Megargel and nearby areas?
Seymour is the county seat of Baylor County, covers 2.92 square miles and sits at an elevation of 1,290 feet. The city’s ZIP code is 76380. Goree is 17.6 miles southwest, Megargel is 21.3 miles southeast, and Munday is 23.4 miles southwest. Vernon, the nearest larger city listed, is 38.2 miles north. Our Yukon yard is 194 road miles away, about a 3.8 hour drive. We take work in Seymour and rural areas around these routes, with the map pin helping us plan access and mobilization.
Places near Seymour
- Directional boring in Goree: 17.6 miles southwest
- Directional boring in Megargel: 21.3 miles southeast
- Directional boring in Munday: 23.4 miles southwest
- Directional boring in Elbert: 26.6 miles southeast
- Directional boring in Throckmorton: 28.9 miles south
- Directional boring in Vernon: 38.2 miles north
Which jobs call for a bore along Main Street in Seymour?
- Highway crossing: A line under US 82 needs a permitted bore plan that follows TxDOT cover requirements for the type of utility.
- Water service: A new connection near Main Street can be routed from the City of Seymour groundwater system without cutting across the street surface.
- Fiber route: A conduit bore along California Street can pass beneath pavement while the crew checks for existing utilities on the route.
- Creek crossing: A route beneath Seymour Creek needs channel depth planning and a check for Army Corps jurisdiction during planning.
- Drainage crossing: At Plants Creek, a bore can pass below the channel while pits remain on the dirt approaches.
- Rural service: A line near Goree can be planned from the mapped route and access point, with travel from Yukon included in mobilization.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a Seymour bore near Frontage Road?
A map pin matters near Frontage Road because the exact position can put a bore beside pavement, a stream crossing or a highway right of way. Send the Seymour address, what needs to go underground, the pipe or conduit size and the footage. A sketch or plans help us set the route and spot questions before we price the work.
A clear route on Main Street or another open corridor is simpler to plan than a bore that must pass under US 82 or Seymour Creek. Price depends on length, pipe or conduit size, soil and rock, utilities to expose, pavement, creek crossings, pits and backfill. Miles fine sandy loam and sandy clay loam can affect reaming and fluid needs. Mobilization also reflects Seymour’s 194 road miles from Yukon. High profile or emergency work can add planning needs.
Questions people ask about boring in Seymour
Does Trinity take directional boring jobs in Seymour and Baylor County, and who staffs them?
Yes. We take directional boring jobs in Seymour, Baylor County, with our own crews and partner contractor crews from vetted satellite yards. You work with Trinity from the first call through the bore log. A route near Seymour Creek or US 82 still gets planned around the actual location and utility conflicts.
Who controls Main Street in Seymour, and can a bore avoid cutting it?
The City of Seymour controls its city streets, including Main Street. Directional boring can place a line beneath pavement without opening a trench across the street. The route still needs utility checks and suitable pit locations, especially where Main Street approaches another mapped street or a stream crossing.
Do older Seymour homes near California Street mean replacement lines need a bore?
They can. The American Community Survey 2019 to 2023 five year estimates put the median housing year at 1963, with 42% of units built before 1960. A replacement route near California Street may need to avoid existing buried utilities. We pothole marked conflicts before drilling, then plan the bore for the new line and its connection points.
What ground does a bore pass through in Seymour’s Miles soil?
The USDA soil survey maps Miles soil under 32% of Seymour. At about 40 inches, sandy clay loam is mapped under 33% of the city, while very fine sandy loam is mapped under 32%. Those mapped textures are not test borings; they help us plan staged reaming and the fluid approach before the actual ground is exposed.
Will a directional bore in Seymour hit rock?
The USDA soil survey maps bedrock within 60 inches in 3% of Seymour, so bedrock is not mapped in the top five feet across most of the city. The geologic map shows Quaternary Calcareous Clay Disintegration Residuum over or alongside Early Permian sedimentary material. A bore can encounter harder material at depth, so the route and drilling response matter.
Who approves a bore under US 82 in Seymour, and which TxDOT office handles it?
The line owner applies for a utility permit through TxDOT’s RULIS system, and the Wichita Falls District reviews work on US 82 in Seymour. Trinity provides the bore plan and profile for that filing. The permit sets the project conditions, including required cover, which depends on whether the line is electric, communication, water or pressurized sewer.
Does Trinity cover Goree, Megargel and rural sites outside Seymour?
Yes. We take work around Seymour as well as nearby rural routes. Goree is 17.6 miles southwest, and Megargel is 21.3 miles southeast. Send the location and proposed route so we can account for access, ground conditions and travel from our Yukon main office.
How early should I call Texas811 for a bore near Frontage Road in Seymour?
The person arranging excavation needs to request a Texas811 locate at least 48 hours before work starts, not counting Saturdays, Sundays or legal holidays, and no earlier than 14 days before. If a Frontage Road start slips more than 14 days past the original notice, submit a new request. Have worn or moved marks refreshed before work continues.
What affects the cost of a directional bore under US 82 in Seymour?
The job scope sets the price: footage, pipe or conduit size, soil and rock, utilities to expose, pavement, pits and crossings all matter. A bore under US 82 has highway permit and cover conditions to plan around, while sandy clay loam affects drilling decisions. Seymour’s 194 road miles from Yukon also affect mobilization.
Where the Seymour facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Seymour
- U.S. Census Bureau, TIGER/Line 2024: Seymour boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Seymour
- U.S. Census Bureau, American Community Survey 2019 to 2023: Seymour housing units and year built
- Macrostrat geologic map compilation: map units under Seymour
- U.S. EPA Safe Drinking Water Information System: public water systems serving Seymour
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Baylor County
- U.S. Geological Survey, Elevation Point Query Service: Seymour elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Seymour
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Seymour
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Seymour, Texas
Type the address of your job in Seymour. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Seymour
All counties: Texas county list.
