trinityboringsolutions.com

Munday Texas Directional Boring: Rotan Clay Loam, US 277 And Main Street

Quick Answer: Rotan clay loam is the main mapped soil around Munday, and its sticky cuttings can ball on a reamer. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for lines crossing US 277 and Munday streets. From our Yukon, Oklahoma main office, the 219 road mile trip to Munday affects mobilization for work near Main Street. Clay can grip pipe, so staged reaming and prompt pullback matter on Munday Avenue.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Munday bores at a glance

  • Incorporated city in Knox County, Texas. Population 1,214 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 219 miles, about 4.3 hours of driving.
  • Ground: Rotan soil is mapped on 62 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 277 and FM 2811. State permit office: TxDOT Childress District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Munday, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring in Munday and Knox County?

Rotan clay loam covers much of Munday, and sticky cuttings can build on a reamer. The Census Bureau Vintage 2024 estimate puts the Knox County city population at 1,214. We install water, sewer, gas, electric conduit and fiber lines; on Munday Avenue or Main Street, the route determines where a service or utility line can run.

Our main office is in Yukon, Oklahoma, and Munday work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa, Oklahoma. Against that reach, a typical Munday job may be a shorter service route through Rotan clay loam, with Trinity handling the bore log whichever crew is on site.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does a Munday bore meet in Rotan soil?

The USDA soil survey maps Rotan clay loam across 62 percent of Munday, with Miles fine sandy loam mapped across another 17 percent. Surface texture is clay loam across 64 percent and fine sandy loam across 36 percent. At about 40 inches below the surface, clay is mapped across 62 percent of the area; average clay content there is 38 percent. Those mapped patterns, not test borings, point to sticky cuttings that may collect on a reamer and clay that can grip pipe.

USDA soil survey, inside the Munday city limitsWhat is mapped
Soil series mappedRotan 62 percent, Miles 23 percent, Winters 12 percent and Sagerton 3 percent
Texture at the surfaceclay loam 64 percent and fine sandy loam 36 percent
Texture about 40 inches downclay 62 percent, sandy clay loam 23 percent and sandy clay 12 percent
Engineering class about 40 inches downlean clay (CL) 77 percent and clayey sand (SC) 23 percent
Average clay content about 40 inches down38 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel74 percent of the area

Bedrock is not mapped within the top five feet in Munday, but that does not rule out deeper rock. We treat seasonal water tables and flood prone soils near Main Street as unmapped in Munday. High steel corrosion risk covers 74 percent of the mapped area, so the line owner should consider materials for steel casing and tracer wire; HDPE is not subject to that soil concern. The geologic map shows Quartz sand disintegration residuum of Quaternary age and Early Permian sedimentary rock, so local conditions still need checking along a proposed route near US 277.

How do we plan a bore through Munday’s clay loam near Main Street?

In Munday, the USDA survey’s clay loam at the surface and clay mapped below about 40 inches call for a controlled fluid plan. We adjust reaming and pullback to limit buildup and keep the bore on line near local streets.

  1. With Rotan clay loam covering 62 percent of mapped Munday area, we use thinner fluid and staged reaming to limit sticky buildup, then pull pipe promptly.
  2. The survey maps heavy clay across 74 percent of Munday at about 40 inches; near Main Street, we watch fluid returns so pressure does not lift pavement.
  3. As a bore advances near US 277, a walkover locator tracks the drill head from the surface, while we log depth and pitch as each rod advances.
  4. Before the drill approaches any marked line along 7th Avenue, we hydrovac pothole it; paint shows position, not buried depth.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Which roads could a Munday bore cross near Main Street?

US 277 runs 3.9 mapped roadway miles inside Munday, while FM 2811 adds 0.4 miles; TxDOT right of way can shape a bore route at either road. Main Street is the longest named street at 1.32 miles, followed by Munday Avenue at 1.12 miles and Fir Avenue at 0.88 miles. Where an existing highway pavement must be crossed, a bore keeps the roadway intact rather than cutting across it.

CrossingTypeMapped extentWho has a say
US 277US highway3.9 roadway miles insideState highway office
FM 2811State highway0.4 roadway miles insideState highway office
Swipe the table sideways to see every column.

Public maps show no railroad inside Munday or within one mile, so no track crossing is mapped near Main Street. No named stream is mapped inside the city or within one mile, and no street crossing of a named stream is mapped. No lakes or ponds are mapped within one mile either. A proposed route near 7th Avenue therefore calls for checking streets and buried utilities rather than planning around a mapped rail or water crossing.

Who approves a Munday bore under US 277?

Munday is incorporated, so its public streets, including Main Street, belong to the city. Work in the US 277 or FM 2811 right of way needs a TxDOT utility permit reviewed by the TxDOT Childress District. The utility owner submits the application through RULIS; we prepare the bore plan and profile and work under the permit issued to that owner. At US 277 crossings, electric and communications lines and water lines need 60 inches of cover; along the right of way, the respective minimums are 48 inches and 36 inches. Beneath existing highway pavement, TxDOT requires boring or tunneling, with casing at crossings and a bore extending below all travel lanes on rural highways.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are near the City of Munday system?

The City of Munday owns the public water system, which uses purchased surface water; it lists 677 service connections and 1,478 people served. That system is a coordination point for a proposed water route near Main Street. EIA records list AEP Texas North and Tri-County Electric Cooperative as reporting electric service in Knox County, but that does not identify the provider at every Munday address. We confirm the line owner before designing an electric conduit bore.

Line ownerWhat it isSourceSize
City of MundayPublic water systemSurface water bought from another system677 connections, 1,478 people served
AEP Texas North and Tri-County Electric CooperativeElectric utilities reporting service in Knox CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates place Munday’s median housing year at 1966, with 41 percent built before 1960, 53 percent from 1960 to 1999 and 6 percent in 2000 or later. That mix may mean replacement work as well as new services along streets such as 7th Avenue. A home’s age does not locate a buried line, so the proposed route still needs utility checks before drilling.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

How far is Munday from Goree and our Yukon office?

Munday is in Knox County, covers 1.43 square miles and sits at an elevation of 1,481 feet. Its ZIP code is 76371. Goree is 6.0 miles east, Weinert is 9.0 miles south and Knox City is 11.2 miles west. County seat Benjamin is 13.6 miles northwest. The drive from our Yukon, Oklahoma main office is 219 road miles and 4.3 hours, a distance that can affect mobilization for a bore near US 277.

Places near Munday

What boring work comes up near Munday Avenue?

  • Highway crossing: A water or communications bore under US 277 needs a route and cover plan that fits TxDOT right of way and the roadway.
  • Street conduit: Along Munday Avenue, entry pits can keep an electric or fiber route below the street instead of cutting across the travel surface.
  • Water service: A proposed connection near the City of Munday system needs the actual service location checked before choosing a route.
  • Utility exposure: For a proposed line under Main Street, we expose marked utilities by hydrovac before the drill approaches; paint does not show depth.
  • Short service bore: Rotan clay loam around 7th Avenue can make sticky returns, so reaming and pullback timing need attention.
  • Acreage service: For a route toward Goree, bore length, access and clay conditions shape the plan beyond Munday’s city streets.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Munday 7th Avenue?

A map pin matters because a route on US 277 has different right of way constraints from one on 7th Avenue. Send the job address or pin, what will go underground, pipe or conduit size and footage. A sketch or plans help us review the alignment and access.

The job details set the price: length and pipe size, Rotan clay loam conditions, and the number of utilities to expose all affect the work. Concrete or pavement near Main Street can change pit placement, while access, excavator time and sand backfill affect the setup. Our mobilization planning accounts for 219 road miles from Yukon to Munday, which can shape equipment scheduling. For high profile or emergency work on US 277, we plan added coordination with the TxDOT Childress District.

Questions people ask about boring in Munday

Does Trinity take directional boring jobs in Munday and Knox County?

Yes. We take directional boring work in Munday and staff it with our crews or partner contractor crews from vetted satellite yards. Our Yukon office remains the main point of contact from the first call through the bore log, including for a route near Main Street.

What is the Rotan soil like for a bore in Munday?

Rotan clay loam is mapped across 62 percent of Munday. At about 40 inches down, clay is mapped across 62 percent of the area, with an average clay content of 38 percent. That ground can make sticky cuttings collect on the reamer and grip pipe, so the drill plan needs controlled reaming.

Will a bore along FM 2811 hit deeper rock in Munday, given bedrock is not mapped in the top five feet?

Along Munday Avenue, bedrock is not mapped in the top five feet, but deeper rock remains possible. The geologic map shows Quaternary Quartz sand disintegration residuum and Early Permian sedimentary rock. A route near US 277 still needs site specific planning rather than an assumption about conditions below the mapped depth.

Who approves a bore under US 277 in Munday through the TxDOT Childress District?

TxDOT reviews a US 277 right of way utility permit through its Childress District. The utility owner files in RULIS, while we prepare the bore plan and profile for that application. The permit sets the approved conditions for the Munday crossing.

Who owns Munday’s public water system in Knox County, and does the city use purchased surface water?

Near Munday Avenue, we account for the City of Munday’s public water system using purchased surface water in bore planning. Its records list 677 service connections and 1,478 people served. Those system details matter when a proposed service route near Main Street needs to be coordinated.

Which electric companies report service in Knox County near Munday?

AEP Texas North and Tri-County Electric Cooperative report electric service in Knox County. Those records do not identify the provider at every Munday address, so we confirm the line owner and conduit specifications for the specific route before planning work near 7th Avenue.

What bore sizes and lengths can you handle near Munday 7th Avenue?

Along Main Street, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. For a proposed route near 7th Avenue, the size and footage help determine whether the alignment fits the available ground and access.

How much notice does Texas811 need for a bore near Munday Main Street?

For work near Main Street, Texas811 needs a locate request at least 48 hours before excavation, not counting Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If a start on 7th Avenue slips more than 14 days past the original notice, we make a new request. Before continuing work near Fir Avenue, we have worn or moved marks refreshed through Texas811.

What affects the cost of a directional bore under US 277 in Munday, including TxDOT Childress District permit coordination?

The US 277 job scope, rather than length alone, shapes the price. Factors include footage, pipe or conduit size, Rotan clay loam, utilities to expose, pavement, pits and equipment time. The 219 road miles from Yukon also affect mobilization, while emergency or high profile work can add planning demands.

Where the Munday facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Munday

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Munday, Texas

Type the address of your job in Munday. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Munday

All counties: Texas county list.