trinityboringsolutions.com

Thorntonville Texas Directional Boring: Pyote Soil, Interstate 20 and Union Pacific

Quick Answer: Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Thorntonville, Texas, including routes beneath Interstate 20. The Yukon main office is 488 road miles away, so a bore near Wickett needs mobilization planned with the job. Pyote soil is common here, and sandy ground can fall in behind the drill head. Staged reaming and drilling fluid help keep the hole open for the pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Thorntonville bores at a glance

  • Incorporated city in Ward County, Texas. Population 540 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 488 miles, about 9.5 hours of driving.
  • Ground: Pyote soil is mapped on 44 percent of the area, with fine sandy loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 20. State permit office: TxDOT Odessa District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Thorntonville near Interstate 20?

We take directional boring work in Thorntonville, Ward County, where the Census Bureau Vintage 2024 estimate puts the population at 540. Along streets such as Teresa Street, we install water, sewer, gas, electric conduit and fiber lines by bore when the route and site conditions fit. A bore keeps pavement and driveways intact while the line passes below them.

Our main office is in Yukon, Oklahoma, and Thorntonville work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business started in 1965, with directional boring work dating to 1982. Our record of no utility strikes in over 25 years reflects careful work around buried lines, including lines owned by electric utilities reporting service in Ward County.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does a directional bore meet in Thorntonville’s Pyote soil?

Thorntonville bores may cross Pyote soils, which cover 44 percent of the mapped area, or Kinco soils, mapped across 42 percent. The USDA soil survey maps fine sandy loam across 44 percent of the ground about 40 inches below the surface, with loam across 42 percent. Sandy material is mapped at that depth across 44 percent, while average clay content is 14 percent. These are mapped soil patterns, not test borings, so the route still needs site review.

USDA soil survey, inside the Thorntonville city limitsWhat is mapped
Soil series mappedPyote 44 percent, Kinco 42 percent, McCarran 7 percent and Monahans 7 percent
Texture at the surfacefine sandy loam 49 percent, loamy fine sand 44 percent and loam 7 percent
Texture about 40 inches downfine sandy loam 44 percent, loam 42 percent and gypsiferous material 7 percent
Engineering class about 40 inches downsilty sand (SM) 44 percent, silty clayey sand (SC SM) 42 percent and clayey sand (SC) 7 percent
Average clay content about 40 inches down14 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel7 percent of the area

Bedrock is not mapped in the top five feet of Thorntonville, which does not rule out rock deeper down. The USDA soil survey maps no seasonal water table within 60 inches and no flood prone soils, but the local sand sheet deposits are described as permeable and shallow water may vary by site. Across Thorntonville, we account for the mapped high steel corrosion risk covering 7 percent when selecting casing and tracer wire materials. The geologic map also shows Cenozoic sedimentary rocks of Paleocene age below the surface deposits.

How do we bore through Thorntonville’s fine sandy loam?

We plan a Thorntonville bore around its fine sandy loam and loamy fine sand, which can cave behind the drill head. Keeping the hole supported is central to placing the line cleanly.

  1. Thorntonville’s sandy mapped soils can cave behind the bit, so we use drilling fluid to support the hole and ream in stages before pulling pipe.
  2. At a fine sandy loam route, we have the pipe ready before the final ream so the open hole is not left waiting.
  3. Near Arizona Street, we hydrovac pothole each marked utility on the bore path before drilling close; paint shows location, not depth.
  4. We track the drill head from the surface and log depth and pitch as a bore advances beneath a Thorntonville street.
6 inch PVC sleeve coming out of the bore pit wall in red sandy soil with the Trinity water trailer behind, northeast Oklahoma City
A 6 inch PVC sleeve coming out of the bore pit wall in red sandy soil in northeast Oklahoma City.

Which roads and tracks could a Thorntonville bore cross near Union Pacific?

Interstate 20 runs through Thorntonville, so a bore crossing its pavement needs to go below the road rather than cut across it. Interstate 20 Business runs along or touches the town limits, while Loop 464 is 0.1 miles away. Teresa Street runs 0.81 miles within town, Arizona Street 0.76 miles and Wilma Street 0.72 miles. These routes and the 13.25 public road centerline miles inside town can shape access and bore alignment.

CrossingTypeMapped extentWho has a say
Interstate 20Interstate1.2 roadway miles insideState highway office
Interstate 20 BusinessHighway nearbyRuns along or touches the city limitsState highway office
Loop 464Highway nearby0.1 miles outsideState highway office
Spur 57Highway nearby1.2 miles outsideState highway office
Texas State Highway 18Highway nearby1.2 miles outsideState highway office
Union PacificRailroad nearby0 miles outsideThe railroad
Texas and New Mexico RailwayRailroad nearby0.2 miles outsideThe railroad
Swipe the table sideways to see every column.

Union Pacific track runs along or touches the Thorntonville boundary, and Texas and New Mexico Railway is 0.2 miles away; neither is mapped inside town. No street and rail crossings are mapped within the limits, so a proposed track route needs location confirmation. No streams, drainage channels, lakes or ponds are mapped in town or within one mile. That leaves no mapped creek crossing to plan around, though the actual bore route still needs checking.

Who approves a Thorntonville bore in Ward County?

For a bore under Interstate 20, the utility owner, not our drilling crew, applies for the TxDOT utility permit through RULIS, and the TxDOT Odessa District reviews it. We prepare the bore plan and profile for the owner and work under its permit. TxDOT rules set crossing cover at 60 inches for electric and communication lines and water lines, and 60 inches for pressurized sewer; the permit may set another depth. With Thorntonville incorporated, we coordinate city street work with the city because those streets belong to it. A Union Pacific track crossing also requires an agreement with the railroad.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns utility lines at a Thorntonville address in Ward County?

The water provider for a specific Thorntonville address needs to be confirmed with the city, Ward County or the local water district before a bore is planned. Oncor Electric Delivery Company and Texas-New Mexico Power report electric service in the county, but that does not identify the provider at every address. We confirm the line owner before planning electric conduit, including a route along Arizona Street.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company and Texas-New Mexico PowerElectric utilities reporting service in Ward CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates place Thorntonville’s median housing year at 1982, a useful local context for underground planning. Thorntonville’s estimates put 23 percent of homes before 1960, 45 percent from 1960 to 1999 and 32 percent in 2000 or later, informing underground planning. That mix can mean a project is replacing older lines or adding a newer service. Before drilling near a marked line, we hydrovac pothole it; around a possible Oncor or Texas-New Mexico Power line, paint shows position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Where does Trinity take work around Thorntonville and Wickett?

Thorntonville is an incorporated town in Ward County, at an elevation of 2,600 feet and covering 0.8 square miles. Its ZIP code is 79756. Wickett is 5.0 miles west, Pyote is 12.1 miles west, and Monahans is 10.9 miles northwest; Monahans is also the county seat and nearest larger city. Southwest Sandhill is 1.8 miles southeast, while Grandfalls is 16.9 miles south. The Yukon yard is 488 road miles away, a 9.5 hour drive, which affects planning for equipment mobilization.

Places near Thorntonville

Which jobs call for a bore near Thorntonville’s Teresa Street?

  • Highway crossing: A bore beneath Interstate 20 can carry a water line or conduit below the paved travel lanes without cutting the road.
  • Street service: A water or sewer service along Teresa Street can pass beneath pavement and driveways, with marked lines exposed before drilling nearby.
  • Fiber route: A fiber conduit near Arizona Street can be placed underground while keeping the street surface intact.
  • Rail crossing: A proposed bore near the Union Pacific boundary needs the railroad’s agreement and crossing conditions before the route is set.
  • Electric conduit: A route near Wilma Street starts with confirming the line owner, since Oncor Electric Delivery Company and Texas-New Mexico Power report service in the county.
  • Water line: A service near Wickett needs the provider for that specific address confirmed before a bore is planned.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Thorntonville bore quote near Wilma Street?

For a Thorntonville quote, send the address or map pin, what will go underground, the pipe or conduit size and the footage; a sketch or plans help. Wilma Street is one useful location reference. The route matters because nearby pavement, buried lines and the ground conditions can change how we set up the bore.

The scope sets the price, with length and pipe or conduit size first because they set the scale of the bore. Thorntonville’s sandy soil can call for staged reaming, while crossings at Interstate 20 or near Union Pacific track add coordination and exposure work. Pavement, concrete, pits, excavator time and sand backfill can also affect the plan. Mobilization matters too: the Yukon yard is 488 road miles away.

Questions people ask about boring in Thorntonville

Does Trinity take directional boring jobs in Thorntonville, Ward County, and who staffs them?

Yes, we take directional boring jobs in Thorntonville, Ward County. Our own crews do the work, and vetted partner contractor satellite yards can support the service area. Customers work with Trinity from the first call through the bore log, whichever crew is on site.

What is the ground like for a Thorntonville bore through Pyote soil?

The USDA soil survey maps Pyote soils across 44 percent of Thorntonville and fine sandy loam across 44 percent at about 40 inches. Sandy ground can fall in behind the bit, so fluid support and staged reaming help keep the bore open until the line is pulled.

Will a Thorntonville bore hit rock near the surface?

Though bedrock is not mapped in Thorntonville’s top five feet, we allow for deeper rock when planning bore depth. The geologic map shows Holocene sand sheet deposits and Cenozoic sedimentary rocks of Paleocene age. A site specific route still needs evaluation before choosing equipment or a bore profile.

Who approves a bore under Interstate 20 in Thorntonville?

The utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT Odessa District reviews the Interstate 20 crossing. For the owner’s application in Thorntonville, we provide the bore plan and profile to support review of the proposed underground crossing. TxDOT rules call for boring or tunneling beneath existing highway pavement, with cover requirements set by line type and permit.

What does a Thorntonville bore under Union Pacific track require?

A bore under Union Pacific track requires an agreement with the railroad that owns it. Our agreement for a Thorntonville crossing sets details for casing, depth and flagging before work proceeds. Since the track runs along or touches the Thorntonville boundary, the planned crossing location has to be checked before the bore is designed.

Who supplies electric lines in Thorntonville, Ward County, and who confirms conduit specs?

Oncor Electric Delivery Company and Texas-New Mexico Power report electric service in Ward County, but the specific owner has to be confirmed for the Thorntonville address. Confirm conduit requirements with that line owner before planning a bore, including a route near Arizona Street.

Can I reach Trinity after hours about an urgent bore near Thorntonville’s Arizona Street?

Yes, a person answers Trinity’s phone 24 hours a day at (405) 409-7423, and we provide 24 hour emergency response. For an urgent job near Arizona Street, be ready to describe the location, what line is involved and any known access or crossing constraints.

How early should I call 811 for a Thorntonville bore near Ursila Street?

For a bore near Ursila Street, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811.

What affects the cost of a Thorntonville directional bore near Interstate 20?

Length and pipe or conduit size are key factors, along with Thorntonville’s sandy ground, utilities to expose, pavement, pits and equipment time. An Interstate 20 crossing can add planning and cover requirements. Mobilization also matters because the Yukon yard is 488 road miles away. The project details determine the scope.

Where the Thorntonville facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Thorntonville

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Thorntonville, Texas

Type the address of your job in Thorntonville. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Thorntonville

Same county: Barstow. All counties: Texas county list.