trinityboringsolutions.com

Monahans Texas Directional Boring: Pyote Soil, Interstate 20 and Union Pacific

Quick Answer: Monahans is an incorporated county seat, so its city streets belong to the city; we take directional boring, also called horizontal directional drilling (HDD), beneath Union Pacific tracks and Interstate 20. The Yukon, Oklahoma main office is 508 road miles from Monahans, where Sealy Avenue is one route a project may follow. USDA maps loamy fine sand across 64 percent of the city, so the bore needs support against sandy ground falling behind the bit. A route near Monument Draw also calls for creek crossing review during planning.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Monahans bores at a glance

  • County seat of Ward County, with part of the city in Winkler County, Texas. Population 7,334 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 508 miles, about 10.3 hours of driving.
  • Ground: Pyote soil is mapped on 43 percent of the area, with fine sandy loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 20, Interstate 20 Business, Texas State Highway 18, Loop 464 and Texas State Highway 115. State permit office: TxDOT Odessa District.
  • Railroad track inside the boundary: Union Pacific and Texas and New Mexico Railway, with 5 mapped street and rail crossings.
  • Named streams inside the boundary: Monument Draw.
  • Public water: City of Monahans, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Union Pacific in Monahans?

Trinity Boring Solutions takes directional boring work in Monahans, an incorporated county seat whose city streets belong to the city. With Monahans at 7,334 in the Census Bureau Vintage 2024 estimate, we plan underground work around the town’s stated population. We install water, sewer, gas, electric conduit and fiber, including routes along 15th Street or connections near Interstate 20, with the route planned for the existing lines.

Our main office is in Yukon, Oklahoma, and Monahans work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have drilled directionally since 1982. Four decades of boring informs how we plan for the loamy fine sand mapped around Monahans and the Union Pacific track crossings.

Directional drill rig and crew working on a street beside a brick commercial building
Our drill and crew set up on a street beside a brick commercial building. Photos on this page are from our jobs in Oklahoma and Texas.

What ground and Pyote soil should I expect in Monahans?

The USDA soil survey maps Pyote series across 43 percent of Monahans, with Wickett at 26 percent and McCarran at 12 percent. At about 40 inches, fine sandy loam is the leading mapped texture at 43 percent; the surface is loamy fine sand across 64 percent of the city. Sandy ground cuts readily but can cave behind the drill head, so staged reaming and drilling fluid help keep the bore open. These are mapped soil patterns, not test borings, and the route still needs site specific checks.

USDA soil survey, inside the Monahans city limitsWhat is mapped
Soil series mappedPyote 43 percent, Wickett 26 percent, McCarran 12 percent, Blakeney 6 percent and Monahans 3 percent
Texture at the surfaceloamy fine sand 64 percent, fine sandy loam 16 percent and loam 12 percent
Texture about 40 inches downfine sandy loam 43 percent, cemented material 17 percent and gravelly loam 16 percent
Engineering class about 40 inches downsilty sand (SM) 43 percent, clayey sand (SC) 10 percent and silty clay (CL ML) 10 percent
Average clay content about 40 inches down14 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel12 percent of the area

Bedrock is not mapped within the top five feet in Monahans, but that does not rule out rock deeper down. Seasonal water table and flood prone soils are not mapped, so those conditions are not indicated by the survey along Monument Draw. High steel corrosion risk is mapped across 12 percent; the line owner can weigh casing and tracer wire materials there. The geologic map shows sand sheet deposits of Holocene age and Cenozoic sedimentary rocks of Paleocene age, so deeper conditions may differ from the shallow sandy soils.

What does it take to bore Monahans fine sandy loam?

Monahans has loamy fine sand at the surface and fine sandy loam mapped at about 40 inches. We match fluid, reaming and tracking to the route, including the soil and the streets or tracks it approaches.

  1. Because loamy fine sand covers 64 percent of Monahans, we support the bore wall with drilling fluid, ream in stages and have the pipe ready before the final pass.
  2. Along a route near Monument Draw, we plan the depth and entry pits around the channel, then check during planning whether the crossing is under Corps jurisdiction.
  3. Before drilling near marked utilities on Sealy Avenue, we use hydrovac potholing to expose each line; surface paint does not show its depth.
  4. Near Union Pacific track or Interstate 20, we track the drill head from the surface and log depth and pitch as the bore advances.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What does a bore have to cross in Monahans near Monument Draw?

Interstate 20, Interstate 20 Business and Texas State Highway 18 are among the Monahans routes where a bore may have to pass beneath pavement or right of way. Loop 464 and Texas State Highway 115 also run inside the city limits, while Spur 57 is 0.3 miles outside them. Sealy Avenue is the longest named street at 4.5 miles in the city; Main Avenue and 15th Street are also long routes. A bore beneath existing highway pavement avoids open cutting the traveled surface.

CrossingTypeMapped extentWho has a say
Interstate 20Interstate6.3 roadway miles insideState highway office
Interstate 20 BusinessInterstate4.5 roadway miles insideState highway office
Texas State Highway 18State highway4 roadway miles insideState highway office
Loop 464State highway3.7 roadway miles insideState highway office
Texas State Highway 115State highway1.3 roadway miles insideState highway office
FM 1219State highway0.1 roadway miles insideState highway office
Spur 57Highway nearby0.3 miles outsideState highway office
Union PacificRailroad3.24 track miles insideThe railroad
Texas and New Mexico RailwayRailroad0.08 track miles insideThe railroad
Monument DrawStream1.13 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 3.24 track miles inside Monahans, and Texas and New Mexico Railway has 0.08. Public records map five street and rail crossings in the city, so a route near either railroad needs to account for track ownership and crossing conditions. Monument Draw runs 1.13 channel miles through Monahans; none of its mapped crossings are street crossings. No lakes or ponds are mapped within one mile, which leaves the named draw as the mapped stream crossing to consider.

Who approves a bore near Interstate 20 in Monahans?

For work in Interstate 20 or another state highway right of way in Monahans, the utility owner files the application in TxDOT’s RULIS system, and the TxDOT Odessa District reviews it; we prepare the bore plan and profile for the owner’s filing. TxDOT rules call for boring or tunneling beneath existing highway pavement, with crossings encased and rural highway bores extending beneath all travel lanes. Required cover is 60 inches for electric or communication lines at crossings, and 60 inches for water lines; the permit may set another depth. Monahans city streets belong to the city. A Union Pacific crossing needs that railroad’s agreement, and a Monument Draw crossing is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities should we locate in Monahans and Ward County?

The City of Monahans public water system uses groundwater wells and reports 4,356 service connections serving 6,953 people. Before a bore near that system, we expose marked lines to confirm their position and depth. Oncor Electric Delivery Company and Texas New Mexico Power report electric service in Ward County; the electric line owner is confirmed for the specific route before planning a conduit bore, including near 15th Street.

Line ownerWhat it isSourceSize
City of MonahansPublic water systemGroundwater wells4,356 connections, 6,953 people served
Oncor Electric Delivery Company and Texas-New Mexico PowerElectric utilities reporting service in Ward County and Winkler CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Monahans housing’s median year built at 1970; 28 percent was built before 1960, 58 percent from 1960 to 1999 and 14 percent in 2000 or later. That mix can mean a project replaces older lines or serves newer construction. Along Sealy Avenue, hydrovac potholing exposes marked utilities before the drill approaches, since paint shows a line’s position but not its depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Do you cover Monahans and nearby West Odessa?

Monahans is the Ward County seat, with a small portion extending into Winkler County, at an elevation of 2,722 feet and an area of 28.92 square miles. ZIP codes are 79756, 79788 and 79777. Wickett is 7.6 miles southeast, Wink is 8.0 miles northwest, and Pyote is 8.4 miles south. West Odessa is the nearest larger city, 36.5 miles east. The Yukon, Oklahoma yard is 508 road miles away, a 10.3 hour drive, which affects mobilization for work near Interstate 20.

Places near Monahans

Which jobs call for a bore near Monahans 15th Street?

  • Highway crossing: A route beneath Interstate 20 needs a bore plan that accounts for pavement, required cover and the full crossing.
  • Water service: A connection near the City of Monahans groundwater system needs its route checked against marked lines before drilling.
  • Fiber conduit: A run along 15th Street can pass beneath pavement and driveways without cutting the traveled surface.
  • Creek crossing: A line beneath Monument Draw needs route planning that keeps the bore below the channel and checks Corps jurisdiction.
  • Rail crossing: A bore beneath Union Pacific track needs the railroad’s agreement, with casing and depth addressed for that crossing.
  • Street service: A route on Sealy Avenue can use pits in dirt on either side while leaving sidewalks and pavement uncut.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for work near Monahans Sealy Avenue?

For a Monahans quote, send the address or map pin, what will go underground, the pipe or conduit size and footage; a sketch or plans help show how the route meets Sealy Avenue or a nearby utility. Those details let us review the proposed path, identify crossings and determine whether the scope needs potholing, pits or additional access planning.

A short, direct route through Monahans loamy fine sand may be simpler to plan than a route with several crossings. Length, pipe or conduit size, soil and rock, marked utilities, pavement, creek crossings, pits, excavator time and sand backfill all affect the work. Interstate 20 or Union Pacific crossings add coordination and design needs, while Monument Draw may call for additional crossing review. For mobilization, we account for the 508 road miles from Yukon when coordinating directional boring work in Monahans.

Questions people ask about boring in Monahans

Does Trinity take directional boring jobs in Monahans and Ward County, and who staffs them?

Yes. We take Monahans work with our own crews and through satellite yards operated by partner drilling contractors we have vetted. From the first call through the Monahans bore log, we coordinate with Trinity and whichever crew is on site. That service model applies to routes near Ward County streets such as Sealy Avenue.

Will a bore in Monahans hit rock below Pyote soil?

A bore may meet rock at depth, but bedrock is not mapped within the top five feet of Monahans. The geologic map shows Holocene sand sheet deposits and Paleocene Cenozoic sedimentary rocks. That map does not establish what a specific route near Pyote soil will encounter, so the bore plan must account for site conditions.

Who approves a Monahans bore under Interstate 20?

The utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT Odessa District reviews work in Interstate 20 right of way near Monahans. We provide the owner with the bore plan and profile. TxDOT rules call for boring or tunneling beneath existing highway pavement, with cover and casing addressed in the permit.

What do we plan for a Monahans bore under Union Pacific track?

A Monahans bore beneath Union Pacific track requires an agreement from Union Pacific, the owner of 3.24 track miles inside the city. For a Union Pacific track crossing in Monahans, we set casing, depth and flagging in the agreement. If the line also occupies highway right of way near Interstate 20, TxDOT asks for a copy of the railroad agreement.

Can a line be bored under Monument Draw in Monahans?

A line can be planned beneath Monument Draw, which runs 1.13 channel miles through Monahans. The route must be designed for the channel, and during planning the crossing is checked for U.S. Army Corps of Engineers jurisdiction. The mapped records show no street crossing of the draw, so a site specific route review is needed.

Who runs Monahans public water, and where does the water come from?

The City of Monahans owns and runs the public water system, which uses groundwater wells. Records list 4,356 service connections and 6,953 people served. For a bore near the system, we expose marked utilities with hydrovac potholing before drilling close to them, including on routes around Sealy Avenue.

What bore sizes and lengths can you handle for a Monahans job near 3rd Street?

For a Monahans project near 3rd Street, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The route, soil and crossings determine the approach. A plan near Interstate 20, for example, needs to account for highway requirements.

How much notice does Texas811 need for a Monahans bore near Sealy Avenue?

For a Monahans bore near Sealy Avenue, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For Monahans scheduling, we allow at least two working days, as Texas811 describes, before underground work proceeds. If marks wear off or move, have them refreshed through Texas811 before work continues.

What affects the cost of directional boring in Monahans near Interstate 20?

The job scope sets the price for a Monahans bore, with no single factor deciding it. Length, pipe size, soil, utility exposures, pavement, creek crossings, pits and excavator time all matter. Interstate 20 or Union Pacific crossings require added planning, and the 508 road miles from Yukon affect mobilization.

Where the Monahans facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Monahans

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Monahans, Texas

Type the address of your job in Monahans. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Monahans

Same county: Grandfalls · Barstow. All counties: Texas county list.