trinityboringsolutions.com

Southwest Sandhill Texas Directional Boring: Upton Gravelly Soils, Interstate 20 And Union Pacific

Quick Answer: Upton gravelly soils cover 27 percent of Southwest Sandhill, and coarse material can make a borehole cave behind the drill. Along Interstate 20 and Colorado Street, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Southwest Sandhill, Texas. The Yukon, Oklahoma main office is 488 road miles from Loop Road, so distance affects mobilization. Upton ground calls for careful reaming and a hole kept stable until pipe is ready.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Southwest Sandhill bores at a glance

  • Unincorporated community in Ward County, Texas. Population 1,666 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 488 miles, about 9.5 hours of driving.
  • Ground: Upton soil is mapped on 27 percent of the area, with very gravelly loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 20, Interstate 20 Business, Loop 464 and Texas State Highway 18. State permit office: TxDOT Odessa District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for Southwest Sandhill boring near Union Pacific?

For directional boring in Southwest Sandhill, Ward County, call Trinity Boring Solutions; Upton gravelly soils shape how we plan each route. The Census Bureau counted 1,666 residents in the 2020 Census. We install water, sewer, gas, electric conduit and fiber for routes along streets such as Colorado Street or near Interstate 20, with the path set to the job plans.

Our main office is in Yukon, Oklahoma, and Southwest Sandhill work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We began directional boring in 1982, building on a family business started in 1965. Decades of work matter on Upton gravelly soils, where maintaining a stable hole takes attention through each reaming pass.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Southwest Sandhill ground like to bore in Upton soil?

Upton gravelly soils are the leading mapped ground type in Southwest Sandhill, so gravel can affect how the drill tracks and how the borehole holds. The USDA soil survey maps Upton across 27 percent of the area, with gravelly loam at the surface. At about 40 inches, very gravelly loam is mapped across 27 percent, while fine sandy loam accounts for 21 percent. Loamy fine sand appears at the surface across 26 percent. These are mapped patterns, not test borings, so the route still needs to be checked on site.

USDA soil survey, inside the Southwest Sandhill mapped community boundaryWhat is mapped
Soil series mappedUpton 27 percent, McCarran 23 percent, Pyote 21 percent, Kinco 9 percent and Monahans 8 percent
Texture at the surfacegravelly loam 27 percent, loamy fine sand 26 percent and loam 23 percent
Texture about 40 inches downvery gravelly loam 27 percent, gypsiferous material 23 percent and fine sandy loam 21 percent
Engineering class about 40 inches downclayey gravel (GC) 31 percent, silty sand (SM) 21 percent and silty clayey sand (SC SM) 9 percent
Average clay content about 40 inches down17 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel25 percent of the area

The USDA survey does not map bedrock within 60 inches of the surface in Southwest Sandhill, though that does not rule out deeper rock. Seasonal water table and flood prone soils are not mapped, which can simplify pit planning but does not replace checking actual conditions. High steel corrosion risk is mapped across 25 percent, so the line owner should consider material choices for steel casing and tracer wire. The geologic map includes Holocene sand sheet deposits, which can be permeable and loose, and Paleocene Cenozoic sedimentary rocks below the surface deposits.

How do crews handle Southwest Sandhill very gravelly loam?

We adjust the bore plan for Southwest Sandhill’s very gravelly loam, which can shift the drill head and let an open hole cave. Upton soils call for steady tracking and staged reaming.

  1. In Upton gravelly soils, we ream in stages and keep the pipe ready, reducing the time an open hole can cave before installation.
  2. Where gravel could steer the head off course, we check depth and pitch at each rod along routes near Colorado Street.
  3. We use a walkover locator to follow the drill head and log depth and pitch as a bore advances beneath Interstate 20.
  4. Before drilling near marked lines on a Loop Road route, we hydrovac pothole them because surface marks do not show burial depth.
6 inch Schedule 40 PVC sleeve in a bore pit in sandy soil on a water main crossing at NE 24th Street, Oklahoma City
A 6 inch Schedule 40 PVC sleeve in a bore pit in sandy soil on a water main crossing in Oklahoma City.

What does a bore have to cross in Southwest Sandhill near Colorado Street?

A Southwest Sandhill bore may need to pass beneath Interstate 20, Loop 464 or Texas State Highway 18, depending on the route. Interstate 20 runs through the northern part of the community, while Highway 18 follows its eastern side. Colorado Street is the longest named street at 5.27 miles, followed by Stockton Avenue at 4.99 miles. Loop Road covers 2.6 miles. Where pavement or a driveway lies over the route, boring can avoid cutting across the surface, subject to the applicable road permit.

CrossingTypeMapped extentWho has a say
Interstate 20Interstate3.8 roadway miles insideState highway office
Interstate 20 BusinessInterstate0.1 roadway miles insideState highway office
Loop 464State highway5.2 roadway miles insideState highway office
Texas State Highway 18State highway5 roadway miles insideState highway office
Spur 57Highway nearby0.2 miles outsideState highway office
Union PacificRailroad nearby0 miles outsideThe railroad
Texas and New Mexico RailwayRailroad nearby0.8 miles outsideThe railroad
Swipe the table sideways to see every column.

No railroad lies inside the mapped Southwest Sandhill community boundary, and no mapped street and rail crossings are recorded inside it. Union Pacific track runs along or touches the boundary, while Texas and New Mexico Railway is 0.8 miles outside. There are no mapped streams inside or within one mile, and no named stream crossings are mapped. That means a typical route is more likely to involve pavement, roads or utilities than a local creek crossing.

Who has to sign off on Southwest Sandhill bores in Ward County?

Southwest Sandhill is an unincorporated census designated place, so its public streets are not managed by a city government; Ward County or the state has authority according to the road. For work in Interstate 20, Loop 464 or Texas State Highway 18 right of way, the line owner files through TxDOT’s online RULIS system, and the TxDOT Odessa District reviews it. We prepare the bore plan and profile for the owner’s application and work under its permit. TxDOT rules set cover depths by line type, and the permit may specify a different depth. A Union Pacific track crossing requires the railroad’s crossing agreement.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Southwest Sandhill, Ward County?

The water provider for a specific Southwest Sandhill address must be confirmed with the county or local water district before planning a bore; available EPA records do not match a provider to this place. Oncor Electric Delivery Company and Texas-New Mexico Power report electric service in Ward County, but the line owner for the route must be confirmed before a conduit bore. That check matters along Colorado Street and near Interstate 20, where existing lines may be in the proposed path.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company and Texas-New Mexico PowerElectric utilities reporting service in Ward CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We use Southwest Sandhill’s median housing year of 1972 from American Community Survey 2019 to 2023 estimates when planning underground routes around existing development. It estimates 38 percent of homes were built before 1960, 42 percent from 1960 to 1999 and 20 percent in 2000 or later. Older service routes near Colorado Street may need replacement, while newer areas may call for added connections. We hydrovac expose marked utilities on the bore path before drilling near them; paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

What is near Southwest Sandhill and Monahans?

Southwest Sandhill is in Ward County at an elevation of 2,592 feet, covering 7.36 square miles in ZIP code 79756. Thorntonville is 1.8 miles northwest, and Wickett is 5.9 miles west. Monahans, the county seat and nearest larger city, is 12.5 miles northwest. The mapped community is 488 road miles and a 9.5 hour drive from our Yukon, Oklahoma yard, a distance that affects crew mobilization for a bore on Interstate 20 or Loop Road.

Places near Southwest Sandhill

What kinds of bores come up in Southwest Sandhill near Loop Road?

  • Highway crossing: A bore beneath Interstate 20 keeps the pavement intact, with the route and cover planned for the applicable TxDOT permit.
  • Street service: A water or sewer line along Colorado Street can be installed beneath pavement rather than by cutting across the road.
  • Fiber conduit: A route near Loop Road can carry communications conduit, with the path checked for marked utilities before drilling.
  • Rail crossing: A bore below Union Pacific track needs the track owner’s crossing agreement, with the crossing details set before work begins.
  • Electric conduit: Near Interstate 20, we confirm the electric line owner before planning conduit and pothole marked utilities on the path.
  • Neighborhood service: A new or replacement connection near Stockton Avenue can be scoped from the address, line size and proposed footage.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for Southwest Sandhill work near Interstate 20?

For a quote, share the address or map pin, what the route will carry, the pipe or conduit size and the footage. For example, a plan near Interstate 20 can show the road crossing, while a Colorado Street address identifies the work location. A sketch or plans help us understand the route, access and pit locations before we scope the bore.

The 488 road miles from Yukon come into mobilization planning first. Upton gravelly soils can affect drilling pace and reaming, while pipe size and bore length shape the equipment and work plan. A route beneath Interstate 20 or near Union Pacific track adds crossing requirements and coordination. Pavement, the number of utilities to expose, pit and excavator needs, sand backfill and any drainage crossing also affect the scope. For high profile or emergency work in Southwest Sandhill, we allow added planning time for underground boring.

Questions people ask about boring in Southwest Sandhill

Does Trinity Boring Solutions take Southwest Sandhill jobs in Ward County, and who staffs them?

Yes. We take directional boring work in Southwest Sandhill, Ward County, using our own crews and crews from partner drilling contractors we have vetted. Our Yukon main office remains your contact from the first call through the bore log, whether the work is near Colorado Street or Interstate 20.

Will a Southwest Sandhill bore hit rock below the Upton soils?

The USDA soil survey does not map bedrock within the top five feet in Southwest Sandhill, but deeper rock remains possible. The geologic map shows Holocene sand sheet deposits and Paleocene Cenozoic sedimentary rocks. A route near Loop Road still needs field planning because mapped conditions do not establish the exact ground at a bore location.

Who approves a Southwest Sandhill bore under Interstate 20?

For Interstate 20 right of way, the utility line owner submits the application in TxDOT’s RULIS system, and the TxDOT Odessa District reviews it. We prepare the bore plan and profile for the owner. Cover and installation details are addressed through the TxDOT permit for the crossing.

What do we need for a Southwest Sandhill bore under Union Pacific track?

A bore under the Union Pacific track at the community boundary requires a crossing agreement from the railroad that owns it. The agreement sets details such as casing, depth and flagging. If the work also uses highway right of way, TxDOT asks for a copy of the railroad agreement.

Who owns Southwest Sandhill electric lines in Ward County, and who confirms conduit specs?

Oncor Electric Delivery Company and Texas-New Mexico Power report electric service in Ward County, but neither should be assumed to serve every Southwest Sandhill address. The specific line owner must be confirmed before planning a conduit bore. For a route near Colorado Street, that check and utility potholing help establish a safe path.

Does Ward County or a city control Loop Road in Southwest Sandhill, and must it be cut?

Southwest Sandhill is unincorporated and has no city government, so public streets fall under county authority unless a state road is involved. A Loop Road bore can pass beneath pavement without cutting across it. The road owner and any applicable permit need to be identified for the route.

How much notice does Texas811 need for a Southwest Sandhill bore near Colorado Street?

For a Colorado Street excavation, request the Texas811 locate at least 48 hours before starting, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If our Southwest Sandhill start slips more than 14 days past the original notice, we submit a new request. Before continuing Southwest Sandhill work, we refresh marks that wear off or move through Texas811.

Does the 488 mile trip from Yukon to Southwest Sandhill near Monahans change a quote?

Yes. Southwest Sandhill is 488 road miles and a 9.5 hour drive from our Yukon yard, so mobilization is part of scoping a job near Monahans. Route length, pipe size, Upton gravelly soils, utilities to expose and pavement or highway crossings also affect the work plan.

What affects the cost of a Southwest Sandhill directional bore near Interstate 20?

The job scope determines the price. For a route near Interstate 20, we consider bore length, pipe or conduit size, Upton gravelly ground, highway or railroad crossings, pavement, utility potholing and pit work. Mobilization from Yukon also matters, as can drainage crossings and high profile or emergency conditions.

Where the Southwest Sandhill facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Southwest Sandhill

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Southwest Sandhill, Texas

Type the address of your job in Southwest Sandhill. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Southwest Sandhill

Same county: Barstow. All counties: Texas county list.