trinityboringsolutions.com

Weir Texas Directional Boring: Austin Silty Clay, Georgetown Railroad, Weir Branch

Quick Answer: We install water, sewer, gas, electric conduit and fiber by directional boring, also called horizontal directional drilling (HDD), for crossings such as FM 971 in Weir. The job is 375 road miles from our Yukon, Oklahoma main office, and Towns Mill Road is one local route a bore may follow. Austin silty clay dominates the mapped surface, so sticky cuttings need careful fluid and reaming control. Weir Branch and the Georgetown Railroad also call for route planning around crossings.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Weir bores at a glance

  • Incorporated city in Williamson County, Texas. Population 770 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 375 miles, about 7.2 hours of driving.
  • Ground: Austin soil is mapped on 42 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 63 percent of the area.
  • Highways inside the boundary: FM 971 and FM 1105. State permit office: TxDOT Austin District.
  • Railroad track inside the boundary: Georgetown Railroad, with 3 mapped street and rail crossings.
  • Named streams inside the boundary: Weir Branch, San Gabriel River, Berry Creek and Ranger Branch.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near FM 971 in Weir?

We install utility lines for homes and projects in Weir, Williamson County, where the Census Bureau Vintage 2024 estimate puts the population at 770. Water, sewer, gas, electric conduit and fiber can run beneath Main Street or connect properties near FM 971. A bore can keep those streets and driveways intact while the new line passes below them.

Our main office is in Yukon, Oklahoma, and Weir work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For work near FM 971, we handle lines from 3/4 inch service lines to 48 inch casing and bores from 10 feet to 5,000 feet. Our family business started in 1965, and we have done directional boring since 1982.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Austin soil mean for a Weir bore?

The USDA soil survey maps Austin soil across 42 percent of Weir, with Castephen at 19 percent and Houston Black at 12 percent. Silty clay is the surface texture across 71 percent of the city. At about 40 inches below the surface, the survey maps bedrock across 63 percent, clay across 14 percent and silty clay loam across 11 percent. These are mapped soil patterns, not test borings. Sticky clay can load a reamer, so the bore plan needs to account for the ground along the specific route.

USDA soil survey, inside the Weir city limitsWhat is mapped
Soil series mappedAustin 42 percent, Castephen 19 percent, Houston Black 12 percent, Krum 10 percent and Oakalla 5 percent
Texture at the surfacesilty clay 71 percent, clay 14 percent and silty clay loam 13 percent
Texture about 40 inches downbedrock 63 percent, clay 14 percent and silty clay loam 11 percent
Engineering class about 40 inches downfat clay (CH) 24 percent and lean clay (CL) 11 percent
Average clay content about 40 inches down46 percent
Bedrock mapped within 60 inches63 percent of the area (0 percent hard rock, 63 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils7 percent of the area
High corrosion risk for uncoated steel90 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches across 63 percent of Weir, with typical bedrock depth at 25 inches. That can slow drilling and make the soil to rock transition a steering concern. Seasonal water table soils are not mapped within 60 inches, while flood prone soils cover 7 percent. High steel corrosion risk is mapped across 90 percent, so the line owner should consider casing and tracer wire materials; HDPE is not affected by soil corrosion. The map includes Quaternary deposit, undivided, and Late Cretaceous sedimentary units.

How do we bore Weir ground where bedrock is mapped?

We plan each Weir bore for the mapped Austin silty clay and shallow weathered bedrock, then track the drill head beneath the chosen route. Towns Mill Road and nearby utility marks shape the entry, exit and bore path.

  1. Austin silty clay can stick to the reamer and grip the pipe, so we use controlled fluid, ream in stages and prepare to pull pipe the same day.
  2. Where Weir’s mapped weathered bedrock meets soil, we check depth and pitch as each rod advances because the transition can nudge the drill head off line.
  3. Before drilling near marked lines along Main Street, we hydrovac pothole each utility on the bore path; surface paint shows location, not depth.
  4. At a Weir Branch crossing, we plan the bore below the channel and check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

What is in the way of a new line near Towns Mill Road in Weir?

FM 971 and FM 1105 run inside Weir, with 1.7 and 1.0 mapped roadway miles in the city. Texas State Highway 29 lies 0.7 miles outside the limits. Towns Mill Road is the longest named street in the city at 1.57 miles; Private Road 934 runs 0.59 miles and Main Street 0.49 miles. A route near these roads may cross pavement or driveways, so a bore can pass beneath them instead of opening a trench through the surface.

CrossingTypeMapped extentWho has a say
FM 971State highway1.7 roadway miles insideState highway office
FM 1105State highway1 roadway miles insideState highway office
Texas State Highway 29Highway nearby0.7 miles outsideState highway office
Georgetown RailroadRailroad2.42 track miles insideThe railroad
Weir BranchStream1.02 channel miles insideChecked for Corps of Engineers jurisdiction
San Gabriel RiverStream1 channel miles insideChecked for Corps of Engineers jurisdiction
Berry CreekStream0.5 channel miles insideChecked for Corps of Engineers jurisdiction
Ranger BranchStream0.31 channel miles insideChecked for Corps of Engineers jurisdiction
Pecan BranchStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Milan BranchStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Mileham BranchStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Georgetown Railroad has 2.42 track miles in Weir, and public mapping shows 3 street and rail crossings in the city. A track crossing needs an agreement with the railroad that owns it, with the crossing details set by that agreement. Weir Branch runs 1.02 channel miles, the San Gabriel River 1.0 miles and Berry Creek 0.5 miles. One street crossing of a named stream is mapped. A creek route needs channel depth planning and a check for federal water crossing jurisdiction.

Whose permission does a Weir bore near the Georgetown Railroad need?

FM 971 and FM 1105 are state highways, so work in their right of way needs a TxDOT utility permit reviewed by the TxDOT Austin District. The utility owner, not our crew, files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the owner’s permit. TxDOT rules require boring or tunneling beneath existing highway pavement, and the permit can set cover requirements for the line. The Georgetown Railroad requires its own crossing agreement. Weir’s city streets belong to the city, and a Weir Branch crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Williamson County near Weir?

The water provider for a specific address near FM 971 has to be confirmed with the city, the county or the local water district before a bore is planned. Electric service reported in Williamson County includes Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. Those county reports do not identify the provider at every Weir address, so we confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Williamson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Weir’s median housing year at 1992; 14 percent of housing was built before 1960, 61 percent from 1960 to 1999 and 25 percent in 2000 or later. That mix may mean a project is replacing older service or adding a new connection, but housing age does not date buried pipe. Along Main Street, we hydrovac expose each marked utility on the route before drilling near it; paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Where is Weir in relation to Georgetown and Serenada?

Weir is an incorporated city in Williamson County, at an elevation of 678 feet and covering 1.82 square miles. Its ZIP codes are 78626 and 78674. Georgetown, the county seat and nearest larger city, is 6.4 miles west; Serenada is 6.6 miles west. Sonterra is 9.0 miles north, Jarrell is 9.3 miles north and Granger is 9.4 miles east. Weir is 375 road miles and a 7.2 hour drive from our Yukon yard, a distance that can affect mobilization for work near FM 971.

Places near Weir

What would we bore near Private Road 934 in Weir?

  • Highway crossing: A bore beneath FM 971 keeps the line below the state highway pavement, with the utility owner handling the TxDOT permit.
  • Water service: A new service near Private Road 934 needs the address specific water provider confirmed before we plan the connection.
  • Fiber drop: Fiber conduit along Main Street can pass below the street surface and marked utilities rather than opening the roadway.
  • Creek crossing: A Weir Branch bore needs a route planned below the channel and a jurisdiction check during planning.
  • Rail crossing: A line beneath Georgetown Railroad track needs an agreement with the railroad owner before the crossing is planned.
  • Electric conduit: Near FM 1105, we confirm the electric line owner and coordinate the conduit route with mapped utilities.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a Weir Branch bore in Weir?

For a Weir Branch crossing or work near FM 971, send the address or map pin first. Tell us what is going in the ground, such as a water line or fiber conduit, then give the pipe or conduit size and estimated footage. A sketch or plans showing the route and crossings help us review the job.

The route and scope set the price. In Weir, soil and rock matter first because Austin silty clay and shallow weathered bedrock can change drilling and reaming. Length and pipe or conduit size also shape the work. We count utilities to expose, pavement near FM 971, creek or drainage crossings such as Weir Branch, pits and excavator time. The 375 road miles from Yukon affect mobilization, and high profile or emergency work can add planning demands.

Questions people ask about boring in Weir

Does Trinity take directional boring jobs in Weir and Williamson County?

Yes, we take directional boring work in Weir and across Texas. Weir projects are handled by our own crews or crews from satellite yards run by partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, including for a route near FM 971.

Who owns electric service in Williamson County near Weir, and who confirms conduit specs?

Several utilities report electric service in Williamson County: Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. We confirm the owner for the specific Weir address before planning a conduit bore, then the line owner confirms the conduit requirements for that route.

Does the city or county control Main Street in Weir, and can a bore avoid cutting it?

Weir is incorporated, so Main Street is a city street. Directional boring can carry a new line below the pavement rather than cutting an open trench through it. We still plan entry and exit pits and check marked utilities along the specific Main Street route before drilling.

Does housing age near Private Road 934 affect replacement bores in Weir?

The American Community Survey 2019 to 2023 estimates put Weir’s median housing year at 1992, with 14 percent built before 1960. That does not establish the age of buried lines near Private Road 934. For replacement work, we locate and expose marked utilities along the bore path before drilling close to them.

Can Austin soil in Weir corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 90 percent of Weir, including areas with Austin soil. The line owner should consider casing and tracer wire materials for a route near FM 971. HDPE is not affected by soil corrosion, but the owner selects the pipe and any steel protection.

What is Austin soil like about 40 inches down for a Weir bore?

At about 40 inches below the surface, the USDA soil survey maps bedrock across 63 percent of Weir and clay across 14 percent. Austin soil covers 42 percent of the city. These are mapped patterns, not test borings; clay can cling to the reamer, while a soil to weathered bedrock transition can affect steering.

Does Trinity cover Georgetown and rural sites outside Weir?

Yes, we take work across Texas, including sites near Georgetown and rural routes outside Weir. Georgetown is 6.4 miles west of Weir, but each job still needs its own route, access and crossing review. We can quote from the site address or map pin and the planned line details.

How much notice does Texas811 need for a Weir bore near Towns Mill Road?

For work near Towns Mill Road, request the Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. Texas811 describes the ticket as a 20 day window. If the start slips more than 14 days past the notice, request a new ticket; refresh worn or moved marks before work continues.

What affects the price of a directional bore near FM 971 in Weir?

We set the price from the job details, not a single standard rate. Austin silty clay and weathered bedrock can affect drilling; route length, pipe size, utilities to expose, pavement near FM 971 and creek crossings such as Weir Branch also matter. Pits, excavator time, backfill, emergency scope and the trip from Yukon affect the work plan.

Where the Weir facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Weir

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Weir, Texas

Type the address of your job in Weir. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Weir

Same county: Round Rock · Leander · Cedar Park · Austin · Hutto · Brushy Creek · Taylor · Liberty Hill · Florence · Bartlett · Thrall · Coupland. All counties: Texas county list.