Directional Boring Contractors in Cooke County, TX
Trinity Boring Solutions is a directional boring contractor serving Cooke County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Gainesville, Muenster, Lindsay, Valley View, Road Runner and Callisburg. The Trinity main office in Yukon, Oklahoma is about 156 road miles from Gainesville, the county seat. Most Cooke County bores go under Interstate 35 and US 82, the Elm Fork Trinity River and BNSF Railway track. Call (405) 409-7423 any time.
Free Bore Planner
Plan Your Bore in Cooke County, Texas
Type the address of your job in Cooke County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
What Should You Know Before Boring in Cooke County?
Cooke County covers 875 square miles, has about 44,258 residents and sits in the TxDOT Wichita Falls District.
| County seat | Gainesville |
|---|---|
| Population | 44,258 (2024 Census estimate), up 6.2% since 2020 |
| Land area | 875 square miles |
| Largest cities and towns | Gainesville (18,295), Muenster (1,725), Lindsay (1,264), Valley View (891) and Road Runner (856) |
| TxDOT district | TxDOT Wichita Falls District |
| 811 center | Texas811 (call 811), two working days of notice |
| Electric utilities | Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Grayson-Collin Electric Cooperative and Wise Electric Cooperative |
| Interstate and US highways | Interstate 35, US 82 and US 77 |
| Rivers | Elm Fork Trinity River |
| Creeks and other streams | Blocker Creek, Timber Creek, Brushy Elm Creek, Spring Creek, Indian Creek, Rock Creek, Pecan Creek and Dry Elm Creek |
| Lakes | Ray Roberts Lake, Lake Texoma, Hubert H Moss Lake and Lake Kiowa |
| Railroads | BNSF Railway and Union Pacific, about 23 main line miles |
| Average precipitation | 38.7 inches a year (1991 to 2020) |
| New housing units permitted | 69 in 2025 |
| Road distance from Trinity main office | About 156 miles from Yukon, Oklahoma to Gainesville |
| Trinity insurance | General liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability |
Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.
What Does a Bore Have to Cross in Cooke County?
A bore in Cooke County most often has to cross a highway such as Interstate 35, US 82 or US 77, a stream such as the Elm Fork Trinity River, Blocker Creek or Timber Creek and BNSF Railway or Union Pacific track. The Census map names 25 larger streams in Cooke County, led by the Elm Fork Trinity River, Blocker Creek, Timber Creek, Brushy Elm Creek, Spring Creek and Indian Creek. The rest are Rock Creek, Pecan Creek, Dry Elm Creek, South Fish Creek, Hickory Creek, Scott Creek, Clear Creek, Flat Creek, Williams Creek, Wheeler Creek, North Fish Creek, Camp Creek, Duck Creek, Dozier Creek, East Mountain Creek, Montague Creek, Valley Creek, Wolf Creek and Tonkawa Creek. Ray Roberts Lake, Lake Texoma, Hubert H Moss Lake and Lake Kiowa are the main mapped lakes. The federal rail map shows about 23 miles of main line track in Cooke County: BNSF Railway about 22 miles and Union Pacific about 1.

What Is the Ground Like for Directional Boring in Cooke County?
Clay is the main thing to plan for in Cooke County: the federal soil survey records a clay rich layer in the top five feet on about 58 percent of the county and bedrock within five feet on about 38 percent. For Cooke County clay the drilling fluid is mixed to stop the cuttings from balling up behind the reamer. May is the wettest month in Cooke County at 5.3 inches on average and January the driest at 2.0. Cooke County averages 38.7 inches of precipitation a year, so rain delays are occasional.
- Most common soils: Sanger (9%), Slidell (6%) and Maloterre (5%).
- Surface texture: most often fine sandy loam (24%) or clay (20%).
- Bedrock within 5 feet: about 38% of the county. Most of it is hard rock.
- Clay rich layer (35% clay or more) in the top 5 feet: about 58% of the county.
- Sandy layer (70% sand or more) in the top 5 feet: about 14% of the county.
- Gravelly, cobbly or stony surface soil: about 18% of the county.
Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Cooke County, Texas (survey area TX097, version 24, September 3, 2026), through Web Soil Survey. Percentages are shares of mapped county area.
Who Permits a Bore in Cooke County?
The TxDOT Wichita Falls District permits bores under state highways in Cooke County, the Cooke County Commissioners Court handles county roads, and Gainesville, Muenster and Lindsay each handle their own streets.
- State highways. Interstate 35, US 82, US 77, the other numbered state routes and the farm to market roads in Cooke County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
- Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
- Railroads. A bore under BNSF Railway or Union Pacific track in Cooke County needs a crossing agreement from the railroad that owns it, which sets the casing, depth and flagging.
- Water crossings. A bore under the Elm Fork Trinity River, Blocker Creek or Ray Roberts Lake is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.
Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.
Which Electric Utilities Serve Cooke County?
Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Grayson-Collin Electric Cooperative and Wise Electric Cooperative serve Cooke County, according to 2025 filings with the U.S. Energy Information Administration. Oncor Electric Delivery Company and Texas-New Mexico Power are investor owned utilities; Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Grayson-Collin Electric Cooperative and Wise Electric Cooperative are member owned cooperatives. Knowing which one holds the territory at the address is the first step on a conduit bore in Cooke County. More on electric line boring for electric cooperatives.
How Much New Construction Is There in Cooke County?
Cooke County permitted 69 new housing units in 2025, all single family homes, according to the Census Bureau Building Permits Survey. The population of Cooke County went from 41,669 in 2020 to 44,258 in 2024, a gain of 6.2 percent. Bore work in Cooke County is a mix of new services and replacement of older lines.
Which Cities and Towns in Cooke County Does Trinity Serve?
Trinity takes directional boring work in all 7 incorporated places in Cooke County and at sites outside city limits, and Gainesville is the largest with about 18,295 residents.
| City or town | 2024 population |
|---|---|
| Gainesville | 18,295 |
| Muenster | 1,725 |
| Lindsay | 1,264 |
| Valley View | 891 |
| Road Runner | 856 |
| Callisburg | 356 |
| Oak Ridge | 296 |
Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Cooke County.
Cooke County borders Denton County, Grayson County, Montague County, Wise County and Love County, Oklahoma; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Denton (Denton), Sherman (Grayson), Montague (Montague) and Decatur (Wise).
Which Directional Boring Services Are Available in Cooke County?
Every Trinity service is available in Cooke County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.
- Road, highway, railroad, creek and river bore crossings, including Interstate 35, US 82 and the Elm Fork Trinity River
- Bores under BNSF Railway and Union Pacific track, built to the railroad boring requirements of the owner
- Drinkable water line boring and sewer force mains in Gainesville or Muenster and on rural water systems
- Underground conduit in Oncor Electric Delivery Company and Texas-New Mexico Power territory, see electric line boring
- Fiber optic boring for ISPs and broadband builders along Interstate 35
- Municipal boring services for cities such as Gainesville, Muenster and Lindsay
The free Bore Planner sizes a Cooke County job before you call.
Cooke County Directional Boring FAQs: What Do Customers Ask?
Does Trinity Boring Solutions work in Gainesville, Texas?
Yes. Trinity Boring Solutions takes work in Gainesville, Muenster, Lindsay, Valley View, Road Runner and Callisburg and the rural parts of Cooke County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.
Who approves a bore under Interstate 35 in Cooke County?
The TxDOT Wichita Falls District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Cooke County Commissioners Court and city streets through the city.
Is there rock in Cooke County?
Yes, in places. The federal soil survey records bedrock within five feet of the surface on about 38 percent of Cooke County, most of it hard rock. Potholing confirms it on the actual bore path.
Can a line be bored under the Elm Fork Trinity River in Cooke County?
Yes. A drill is steered below the bed of the Elm Fork Trinity River from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.
Which railroads have track in Cooke County?
BNSF Railway and Union Pacific, with about 23 miles of main line track on the federal rail map. Each requires its own crossing agreement before a bore goes under the rails.
Is Trinity insured for work in Cooke County?
Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.
How much does directional boring cost in Cooke County?
Our price starts from a general range for the length and the pipe size. Depth, the crossings and the ground set the number, and heavy clay is a factor on many Cooke County jobs.
How Do You Get a Bore Quote in Cooke County?
Call (405) 409-7423 any time or send the address in Cooke County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.