Directional Boring Contractors in Jim Wells County, TX

Trinity Boring Solutions is a directional boring contractor serving Jim Wells County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Alice, Premont, Orange Grove and San Diego. From the Trinity main office in Yukon, Oklahoma it is about 598 road miles south to Alice, the county seat. The usual crossings in Jim Wells County are US 281 and State Highway 359, the Nueces River and Canadian Pacific Kansas City track. Call (405) 409-7423 any time.

Free Bore Planner

Plan Your Bore in Jim Wells County, Texas

Type the address of your job in Jim Wells County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

What Should You Know Before Boring in Jim Wells County?

Jim Wells County covers 865 square miles, has about 38,886 residents and sits in the TxDOT Corpus Christi District.

County seatAlice
Population38,886 (2024 Census estimate), down 0.0% since 2020
Land area865 square miles
Largest cities and townsAlice (17,595), Premont (2,401), Orange Grove (1,182) and San Diego (759)
TxDOT districtTxDOT Corpus Christi District
811 centerTexas811 (call 811), two working days of notice
Electric utilitiesAEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative
Interstate and US highwaysUS 281
State Highways44 and 359
RiversNueces River
Creeks and other streamsAgua Dulce Creek, San Andreas Creek, Los Olmos Creek, Penitas Creek, Trinidad Creek, Chiltipin Creek, Lagarto Creek and San Fernando Creek
LakesLake Corpus Christi and Lake Alice
RailroadsCanadian Pacific Kansas City, about 19 main line miles
Average precipitation26.1 inches a year (1991 to 2020)
New housing units permitted3 in 2025
Road distance from Trinity main officeAbout 598 miles from Yukon, Oklahoma to Alice
Trinity insuranceGeneral liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability

Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.

What Does a Bore Have to Cross in Jim Wells County?

A bore in Jim Wells County most often has to cross a highway such as US 281, State Highway 359 or State Highway 44, a stream such as the Nueces River, Agua Dulce Creek or San Andreas Creek and Canadian Pacific Kansas City track. State Highways 44 and 359 also run through the county. The Census map names 24 larger streams in Jim Wells County, led by Agua Dulce Creek, San Andreas Creek, Los Olmos Creek, Penitas Creek, Trinidad Creek and Chiltipin Creek. The rest are Lagarto Creek, San Fernando Creek, San Diego Creek, Muerto Creek, Santa Gertrudis Creek, Lattas Creek, Palo Hueco Creek, Charquitas Creek, Salado Creek, El Caro Creek, Nueces River, Amargosa Creek, Barbone Creek, Quinta Creek, Escondido Creek, Javelin Creek, Rosita Creek and Jaboncillo Creek. Lake Corpus Christi and Lake Alice are the main mapped lakes. The federal rail map shows about 19 miles of main line track in Jim Wells County, owned by Canadian Pacific Kansas City.

Trinity Boring Solutions horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
A Trinity Boring Solutions drill rig, support trucks and vacuum excavation truck on a jobsite.

What Is the Ground Like for Directional Boring in Jim Wells County?

The ground in Jim Wells County is mixed: according to the federal soil survey, fine sandy loam is the most common surface soil, a clay rich layer shows up in the top five feet on about 30 percent of the county, sandy layers on about 22 percent and caliche within five feet on about 10 percent. Tooling and drilling fluid for a bore in Jim Wells County are matched to what potholing finds on the path. September is the wettest month in Jim Wells County at 4.4 inches on average and February the driest at 1.2. Jim Wells County averages 26.1 inches of precipitation a year, so rain delays are occasional.

  • Most common soils: Opelika (13%), Delfina (11%) and Lattas (10%).
  • Surface texture: most often fine sandy loam (40%) or sandy clay loam (15%).
  • Bedrock within 5 feet: rare, on less than 1% of the county.
  • Caliche within 5 feet: about 10% of the county.
  • Clay rich layer (35% clay or more) in the top 5 feet: about 30% of the county.
  • Sandy layer (70% sand or more) in the top 5 feet: about 22% of the county.
  • Seasonal water table within 5 feet: about 19% of the county.

Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Jim Wells County, Texas (survey area TX249, version 22, September 3, 2026), through Web Soil Survey. Percentages are shares of mapped county area.

Who Permits a Bore in Jim Wells County?

The TxDOT Corpus Christi District permits bores under state highways in Jim Wells County, the Jim Wells County Commissioners Court handles county roads, and Alice, Premont and Orange Grove each handle their own streets.

  • State highways. US 281, the other numbered state routes and the farm to market roads in Jim Wells County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
  • Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
  • Railroads. A bore under Canadian Pacific Kansas City track in Jim Wells County needs a crossing agreement from the railroad that owns it, which sets the casing, depth and flagging.
  • Water crossings. A bore under the Nueces River, Agua Dulce Creek or Lake Corpus Christi is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.

Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.

Which Electric Utilities Serve Jim Wells County?

AEP Texas Central, Nueces Electric Cooperative and San Patricio Electric Cooperative serve Jim Wells County, according to 2025 filings with the U.S. Energy Information Administration. AEP Texas Central is an investor owned utility; Nueces Electric Cooperative and San Patricio Electric Cooperative are member owned cooperatives. Conduit bored in Jim Wells County is built to the standard of whichever of them owns the line. More on electric line boring for electric cooperatives.

How Much New Construction Is There in Jim Wells County?

Jim Wells County permitted 3 new housing units in 2025, all single family homes, according to the Census Bureau Building Permits Survey. The population of Jim Wells County has held near 38,886 since 2020. In Jim Wells County that means steady work on service lines, rural extensions and road crossings.

Which Cities and Towns in Jim Wells County Does Trinity Serve?

Trinity takes directional boring work in all 4 incorporated places in Jim Wells County and at sites outside city limits, and Alice is the largest with about 17,595 residents.

City or town2024 population
Alice17,595
Premont2,401
Orange Grove1,182
San Diego759

Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Jim Wells County.

Jim Wells County borders Brooks County, Duval County, Kleberg County, Live Oak County, Nueces County and San Patricio County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Falfurrias (Brooks), San Diego (Duval), Kingsville (Kleberg), George West (Live Oak), Corpus Christi (Nueces) and Sinton (San Patricio).

Which Directional Boring Services Are Available in Jim Wells County?

Every Trinity service is available in Jim Wells County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.

The free Bore Planner sizes a Jim Wells County job before you call.

Jim Wells County Directional Boring FAQs: What Do Customers Ask?

Does Trinity Boring Solutions work in Alice, Texas?

Yes. Trinity Boring Solutions takes work in Alice, Premont, Orange Grove and San Diego and the rural parts of Jim Wells County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.

Who approves a bore under US 281 in Jim Wells County?

The TxDOT Corpus Christi District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Jim Wells County Commissioners Court and city streets through the city.

Is there rock in Jim Wells County?

Rarely. The federal soil survey records bedrock within five feet of the surface on less than 1 percent of Jim Wells County. Caliche shows up within five feet on about 10 percent. Potholing confirms it on the actual bore path.

Can a line be bored under the Nueces River in Jim Wells County?

Yes. A drill is steered below the bed of the Nueces River from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.

Which railroads have track in Jim Wells County?

Canadian Pacific Kansas City, with about 19 miles of main line track on the federal rail map. Each requires its own crossing agreement before a bore goes under the rails.

Is Trinity insured for work in Jim Wells County?

Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.

How much does directional boring cost in Jim Wells County?

The footage and the pipe size give a general range to start from. Depth, the crossings and the ground set the number.

How Do You Get a Bore Quote in Jim Wells County?

Call (405) 409-7423 any time or send the address in Jim Wells County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.