Directional Boring Contractors in Willacy County, TX
Trinity Boring Solutions is a directional boring contractor serving Willacy County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Raymondville, Lyford and San Perlita. The Trinity main office in Yukon, Oklahoma is about 691 road miles from Raymondville, the county seat. Bores here most often pass under US 77 and State Highway 186, Main Branch Northeast Canal and Union Pacific track. Call (405) 409-7423 any time.
Free Bore Planner
Plan Your Bore in Willacy County, Texas
Type the address of your job in Willacy County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
What Should You Know Before Boring in Willacy County?
Willacy County covers 591 square miles, has about 20,027 residents and sits in the TxDOT Pharr District.
| County seat | Raymondville |
|---|---|
| Population | 20,027 (2024 Census estimate), down 0.7% since 2020 |
| Land area | 591 square miles |
| Largest cities and towns | Raymondville (10,107), Lyford (2,209) and San Perlita (543) |
| TxDOT district | TxDOT Pharr District |
| 811 center | Texas811 (call 811), two working days of notice |
| Electric utilities | AEP Texas Central and Magic Valley Electric Cooperative |
| Interstate and US highways | US 77 |
| State Highways | 186 |
| Creeks and other streams | Main Branch Northeast Canal |
| Railroads | Union Pacific, about 18 main line miles |
| Average precipitation | 25.3 inches a year (1991 to 2020) |
| New housing units permitted | 43 in 2025 |
| Road distance from Trinity main office | About 691 miles from Yukon, Oklahoma to Raymondville |
| Trinity insurance | General liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability |
Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.
What Does a Bore Have to Cross in Willacy County?
A bore in Willacy County most often has to cross a highway such as US 77 or State Highway 186, Main Branch Northeast Canal and Union Pacific track. State Highways 186 also run through the county. The named streams on the Census map are Main Branch Northeast Canal. The federal rail map shows about 18 miles of main line track in Willacy County, owned by Union Pacific.

What Is the Ground Like for Directional Boring in Willacy County?
Shallow groundwater is the main thing to plan for in Willacy County: the federal soil survey records a seasonal water table within five feet of the surface on about 45 percent of the county. Pits in Willacy County are kept small and pumped when needed, and the bore is kept full of drilling fluid. September is the wettest month in Willacy County at 5.0 inches on average and January the driest at 1.1. Willacy County averages 25.3 inches of precipitation a year, so rain delays are occasional.
- Most common soils: Raymondville (12%), Racombes (7%) and Hidalgo (5%).
- Surface texture: most often sandy clay loam (23%) or fine sand (18%).
- Bedrock within 5 feet: rare, on less than 1% of the county.
- Clay rich layer (35% clay or more) in the top 5 feet: about 20% of the county.
- Sandy layer (70% sand or more) in the top 5 feet: about 23% of the county.
- Seasonal water table within 5 feet: about 45% of the county.
Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Willacy County, Texas (survey area TX489, version 24, September 8, 2026), through Web Soil Survey. Percentages are shares of mapped county area.
Who Permits a Bore in Willacy County?
The TxDOT Pharr District permits bores under state highways in Willacy County, the Willacy County Commissioners Court handles county roads, and Raymondville, Lyford and San Perlita each handle their own streets.
- State highways. US 77, the other numbered state routes and the farm to market roads in Willacy County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
- Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
- Railroads. A bore under Union Pacific track in Willacy County needs a crossing agreement from the railroad that owns it, which sets the casing, depth and flagging.
- Water crossings. A bore under Main Branch Northeast Canal is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.
Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.
Which Electric Utilities Serve Willacy County?
AEP Texas Central and Magic Valley Electric Cooperative serve Willacy County, according to 2025 filings with the U.S. Energy Information Administration. AEP Texas Central is an investor owned utility; Magic Valley Electric Cooperative is a member owned cooperative. Conduit bored in Willacy County is built to the standard of whichever of them owns the line. More on electric line boring for electric cooperatives.
How Much New Construction Is There in Willacy County?
Willacy County permitted 43 new housing units in 2025, all single family homes, according to the Census Bureau Building Permits Survey. The population of Willacy County went from 20,162 in 2020 to 20,027 in 2024, a loss of 0.7 percent. In Willacy County the usual job is a replacement line, a rural water or fiber extension, or a road crossing for an existing utility.
Which Cities and Towns in Willacy County Does Trinity Serve?
Trinity takes directional boring work in all 3 incorporated places in Willacy County and at sites outside city limits, and Raymondville is the largest with about 10,107 residents.
| City or town | 2024 population |
|---|---|
| Raymondville | 10,107 |
| Lyford | 2,209 |
| San Perlita | 543 |
Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Willacy County.
Willacy County borders Cameron County, Hidalgo County and Kenedy County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Brownsville (Cameron), Edinburg (Hidalgo) and Sarita (Kenedy).
Which Directional Boring Services Are Available in Willacy County?
Every Trinity service is available in Willacy County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.
- Road, highway, railroad, creek and river bore crossings, including US 77, State Highway 186 and Main Branch Northeast Canal
- Bores under Union Pacific track, built to the railroad boring requirements of the owner
- Drinkable water line boring and sewer force mains in Raymondville or Lyford and on rural water systems
- Underground conduit in AEP Texas Central and Magic Valley Electric Cooperative territory, see electric line boring
- Fiber optic boring for ISPs and broadband builders along US 77
- Municipal boring services for cities such as Raymondville, Lyford and San Perlita
The free Bore Planner sizes a Willacy County job before you call.
Willacy County Directional Boring FAQs: What Do Customers Ask?
Does Trinity Boring Solutions work in Raymondville, Texas?
Yes. Trinity Boring Solutions takes work in Raymondville, Lyford and San Perlita and the rural parts of Willacy County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.
Who approves a bore under US 77 in Willacy County?
The TxDOT Pharr District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Willacy County Commissioners Court and city streets through the city.
Is there rock in Willacy County?
Rarely. The federal soil survey records bedrock within five feet of the surface on less than 1 percent of Willacy County. Potholing confirms it on the actual bore path.
Can a line be bored under Main Branch Northeast Canal in Willacy County?
Yes. A drill is steered below the bed of Main Branch Northeast Canal from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.
Which railroads have track in Willacy County?
Union Pacific, with about 18 miles of main line track on the federal rail map. Each requires its own crossing agreement before a bore goes under the rails.
Is Trinity insured for work in Willacy County?
Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.
How much does directional boring cost in Willacy County?
Length and pipe size put a bore in a general range. Depth, the crossings and the ground set the number, and shallow groundwater is a factor on many Willacy County jobs.
How Do You Get a Bore Quote in Willacy County?
Call (405) 409-7423 any time or send the address in Willacy County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.