Huntington Texas Directional Boring: Fuller Soil, US 69 and Doe Creek
Quick Answer: Need a line beneath US 69 or Doe Creek without opening the surface? We do directional boring, also called horizontal directional drilling (HDD), in Huntington, Texas, for routes like these. Huntington is 397 road miles from our Yukon, Oklahoma main office, so the route near Main Street helps define mobilization. Fuller soil covers 51 percent of the mapped area, and silty clay loam below can hold a hole open and grip pipe. We plan fluid and reaming around those conditions.
Huntington bores at a glance
- Incorporated city in Angelina County, Texas. Population 2,117 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 397 miles, about 8 hours of driving.
- Ground: Fuller soil is mapped on 51 percent of the area, with silty clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 81 percent of the area.
- Highways inside the boundary: US 69, FM 1669, FM 2109, FM 328 and FM 1475. State permit office: TxDOT Lufkin District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Doe Creek, Shawnee Creek and Clayton Creek.
- Public water: City of Huntington, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring under US 69 in Huntington?
Can a line pass beneath US 69 or Doe Creek without cutting the surface? We do directional boring in Huntington, Angelina County, where the Census Bureau Vintage 2024 estimate puts the population at 2,117. Water, sewer, gas, electric conduit and fiber can be routed beneath Main Street, Spruce Street or a local crossing, with the bore planned for the line and the site.
Our main office is in Yukon, Oklahoma, and Huntington work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of directional boring have shaped how our family business plans for ground like Huntington’s Fuller soil; the business started in 1965. The local mix of fine sandy loam and silty clay loam calls for attention to fluid and hole stability.

What is Huntington ground like to bore through Fuller soil?
The USDA soil survey maps Fuller soil across 51 percent of Huntington, with Keltys at 19 percent, Rosenwall at 10 percent, Alazan at 9 percent and Sacul at 6 percent. Fine sandy loam is the mapped surface texture across 89 percent of the city. About 40 inches down, silty clay loam is mapped under 51 percent of the area; fine sandy loam accounts for 19 percent, sandy clay loam 11 percent and clay 11 percent. These are mapped soil patterns, not measurements from a bore site. The sandy surface can cut readily, while deeper clay can cling to a reamer or pipe.
| USDA soil survey, inside the Huntington city limits | What is mapped |
|---|---|
| Soil series mapped | Fuller 51 percent, Keltys 19 percent, Rosenwall 10 percent, Alazan 9 percent and Sacul 6 percent |
| Texture at the surface | fine sandy loam 89 percent and very fine sandy loam 10 percent |
| Texture about 40 inches down | silty clay loam 51 percent, fine sandy loam 19 percent and sandy clay loam 11 percent |
| Engineering class about 40 inches down | lean clay (CL) 64 percent, silty clayey sand (SC SM) 19 percent and clayey sand (SC) 11 percent |
| Average clay content about 40 inches down | 27 percent |
| Bedrock mapped within 60 inches | 81 percent of the area (0 percent hard rock, 81 percent weathered rock) |
| Seasonal water table within 60 inches | 70 percent of the area |
| Flood prone soils | 1 percent of the area |
| High corrosion risk for uncoated steel | 80 percent of the area |
At about 40 inches, the mapped average clay content is 27 percent, and 81 percent of Huntington has weathered bedrock mapped within 60 inches. Typical bedrock depth is 52 inches, but hard bedrock is not mapped within that depth range. A 70 percent seasonal water table share means pits may need pumping. Flood prone soils cover 1 percent, including places where creek depth matters. High steel corrosion risk is mapped across 80 percent, so the line owner should consider casing and tracer wire protection; HDPE is not affected by that soil corrosion concern. The Yegua Formation, of Bartonian age, is mapped here and includes clay with some sandstone, so the bore plan may need to account for changing material.
What does it take to bore Huntington’s silty clay loam?
Huntington’s mapped silty clay loam can stay open but may stick to the reamer and grip pipe. We match drilling fluid and reaming steps to that ground and to the city’s shallow seasonal water table.
- For Fuller soil and silty clay loam, we use a thinner fluid with polymer and ream in stages so sticky clay is less likely to build up on the reamer.
- With seasonal water table mapped within 60 inches across 70 percent of Huntington, we plan smaller pits and pumping where water enters the work area.
- Before drilling near marked lines by Main Street, we use hydrovac potholing to expose each utility because surface marks do not show burial depth.
- A walkover locator tracks the drill head beneath streets such as Spruce Street, while we log depth and pitch as the bore advances.

Which roads or creeks can a Huntington bore cross near Doe Creek?
US 69 runs 3.3 mapped roadway miles inside Huntington, with FM 1669 at 2.0 miles and FM 2109 at 0.7 miles. FM 328 and FM 1475 also pass within the city limits. Main Street is the longest named street at 1.54 miles, followed by Maple Street at 1.45 miles and Linn Street at 1.18 miles. A route beneath one of these roads can keep pavement intact, but its alignment and cover depend on the road and the line being installed.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 69 | US highway | 3.3 roadway miles inside | State highway office |
| FM 1669 | State highway | 2 roadway miles inside | State highway office |
| FM 2109 | State highway | 0.7 roadway miles inside | State highway office |
| FM 328 | State highway | 0.5 roadway miles inside | State highway office |
| FM 1475 | State highway | 0.1 roadway miles inside | State highway office |
| Doe Creek | Stream | 1.67 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Shawnee Creek | Stream | 0.26 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Clayton Creek | Stream | 0.06 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Odell Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Buck Creek | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
| Tubbs Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Huntington or within one mile outside the limits, so there is no mapped local rail route to plan around. Doe Creek runs 1.67 channel miles through the city; Shawnee Creek and Clayton Creek are also mapped. Public records show seven mapped street crossings of named streams. A creek bore needs a route planned below the channel, and its water crossing is checked for U.S. Army Corps of Engineers jurisdiction. No lakes or ponds are mapped within one mile.
Who approves a bore in Huntington and Angelina County?
City streets such as Main Street belong to incorporated Huntington, while a bore in the right of way of US 69, FM 1669 or another state highway needs a TxDOT utility permit. The line owner submits the application through TxDOT’s online RULIS system, and the TxDOT Lufkin District reviews it; we prepare the bore plan and profile for the utility owner’s filing. For electric or communication lines crossing a highway, the stated cover is at least 60 inches below the lowest point of the crossed grade; water crossings also need 60 inches, while pressurized sewer crossings need 60 inches. A Doe Creek route is checked for federal waterway jurisdiction during planning. No railroad crossing is mapped in Huntington.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Huntington through the City of Huntington system?
The City of Huntington public water system uses groundwater wells and reports 1,378 service connections serving 2,014 people. That network may affect a proposed service route along Main Street or Spruce Street. Electric service in Angelina County is reported by Oncor Electric Delivery Company, Houston County Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric Cooperative. We confirm the line owner for the proposed location before planning an electric conduit bore, since the countywide list does not identify the provider at every address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Huntington | Public water system | Groundwater wells | 1,378 connections, 2,014 people served |
| Oncor Electric Delivery Company, Houston County Electric Cooperative, Jasper-Newton Electric Cooperative and Sam Houston Electric Cooperative | Electric utilities reporting service in Angelina County | EIA Form 861 | Confirm the line owner by address |
American Community Survey 2019 to 2023 five year estimates put Huntington’s median housing year at 1982; 17 percent of homes were built before 1960, and 11 percent in 2000 or later. Along Spruce Street, that mix can mean a project replacing older service or adding a new connection. We use hydrovac potholing to expose marked utilities before drilling near them, since paint shows a line’s position but not its depth.

Do you cover Huntington and nearby Lufkin?
Huntington is an incorporated city in Angelina County, at an elevation of 318 feet and covering 2.75 square miles. Its ZIP code is 75949. Lufkin, the county seat and nearest larger city, is 9.5 miles west; Burke is 11.5 miles west, and Redland is 12.0 miles northwest. From our Yukon, Oklahoma main office, Huntington is 397 road miles away, an 8.0 hour drive. That distance is part of planning mobilization for a bore near US 69, while the local street and ground conditions shape the drilling plan.
Places near Huntington
- Directional boring in Lufkin: 9.5 miles west
- Directional boring in Burke: 11.5 miles west
- Directional boring in Redland: 12 miles northwest
- Directional boring in Zavalla: 12.6 miles southeast
- Directional boring in Hudson: 12.6 miles west
Which jobs call for a bore near Huntington’s Main Street?
- Highway crossing: A bore beneath US 69 keeps the existing roadway uncut, with cover and route requirements reviewed for the specific line.
- Water service: A connection near the City of Huntington system can be routed beneath Main Street after the existing utility path is exposed.
- Fiber conduit: A bore along Spruce Street can carry conduit beneath pavement and driveways without opening a continuous trench.
- Creek crossing: A route beneath Doe Creek is planned below the channel and checked for U.S. Army Corps of Engineers jurisdiction.
- Street utility: Sewer or electric conduit beneath Maple Street can use a bore path that avoids open cuts across the road surface.
- FM crossing: A line beneath FM 1669 needs a route and cover plan coordinated with the TxDOT Lufkin District permit process.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Huntington bore near US 69?
For a Main Street quote, start with where the work is, such as an address or map pin. Tell us what goes underground, whether it is a water line or fiber conduit, then give the size and footage. A sketch or plans showing the route toward US 69 or Doe Creek help us see crossings, access and the likely pit locations.
A short, accessible route through the fine sandy loam near Main Street is simpler to plan than a longer bore through deeper silty clay loam. Price also reflects pipe or conduit size, soil and rock, utilities to expose, pavement, creek crossings, pits and excavator time. A route under US 69 can add permit and cover planning, while a Doe Creek crossing brings waterway review into the scope. The 397 road miles from Yukon also affect mobilization; emergency timing can change the work plan.
Questions people ask about boring in Huntington
Does Trinity Boring Solutions take Huntington jobs in Angelina County, and who staffs them?
Yes. We take directional boring work in Huntington, Angelina County, using our own crews and partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, regardless of which crew is on site. A route beneath US 69 or Main Street is planned for the specific line and site.
Does Fuller soil in Huntington corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 80 percent of Huntington, including areas with Fuller soil. HDPE is not affected by that soil corrosion concern. For steel casing or tracer wire, the line owner selects any coating or protection after considering the site and the intended route, such as a crossing near Doe Creek.
What ground will a bore pass through in Huntington’s Fuller soil?
The USDA soil survey maps Fuller soil across 51 percent of Huntington, with fine sandy loam at the surface in most of the city. About 40 inches down, silty clay loam is mapped across 51 percent, while fine sandy loam is mapped across 19 percent. Deeper clay can hold a hole open but stick to the reamer, so drilling fluid and staged reaming matter.
Is there rock under Huntington, and how much bedrock is mapped within five feet?
Weathered bedrock is mapped within 60 inches across 81 percent of Huntington, with typical depth at 52 inches. Hard bedrock is not mapped within 60 inches. That does not establish conditions at every Main Street bore, so the route still needs to account for possible changes in material and steering near the soil to rock contact.
Who approves a bore under US 69 in Huntington, and which TxDOT office reviews it?
The line owner applies for a TxDOT utility permit through RULIS for work in the US 69 right of way, and the TxDOT Lufkin District reviews the application. We provide a bore plan and profile for the owner’s filing. The required cover depends on the line type, and the district can set a different depth in the permit.
Can you bore a line under Doe Creek in Huntington?
A bore can be planned beneath Doe Creek, which runs 1.67 channel miles in Huntington, but the route must be designed for the channel and site conditions. During planning, the crossing is checked for U.S. Army Corps of Engineers jurisdiction. Seasonal groundwater mapped across much of the city can also affect pit placement and pumping.
What bore sizes and lengths can Trinity handle near Spruce Street in Huntington?
We handle lines from 3/4 inch service size up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A Spruce Street job still depends on access, soil and the utilities along the route. Share the proposed size and footage so we can consider how the specific crossing should be planned.
How early should I call Texas811 for a Huntington bore near Main Street, and what if marks move?
For a Main Street bore, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the original notice, submit a new notice. Marks worn off or moved must be refreshed through Texas811 before work continues.
What affects the cost of directional boring under US 69 in Huntington?
The route and scope set the cost. For a US 69 crossing, factors include bore length, pipe size, soil and rock, required utility potholes, pavement and permit planning. Doe Creek adds a water crossing to consider, and pits, excavator time, sand backfill or emergency work can change the scope. Mobilization also reflects Huntington’s 397 road miles from Yukon.
Where the Huntington facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Huntington
- U.S. Census Bureau, TIGER/Line 2024: Huntington boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Huntington
- U.S. Census Bureau, American Community Survey 2019 to 2023: Huntington housing units and year built
- Macrostrat geologic map compilation: map units under Huntington
- U.S. EPA Safe Drinking Water Information System: public water systems serving Huntington
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Angelina County
- U.S. Geological Survey, Elevation Point Query Service: Huntington elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Huntington
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Huntington
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Huntington, Texas
Type the address of your job in Huntington. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Huntington
Same county: Diboll. All counties: Texas county list.
