trinityboringsolutions.com

Archer City Texas Directional Boring: Bluegrove Loam, Highway 79, Wichita Clay

Quick Answer: Bluegrove fine sandy loam covers 28 percent of Archer City, but clay at depth can make a reamer sticky. Along Texas State Highway 79, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), to carry lines beneath pavement. Archer City is 168 road miles from our Yukon, Oklahoma main office, and Center Street access helps shape mobilization. Clay is mapped under about 47 percent of the area at 40 inches, so we plan staged reaming and a careful pipe pull.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Archer City bores at a glance

  • County seat of Archer County, Texas. Population 1,642 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 168 miles, about 3.4 hours of driving.
  • Ground: Bluegrove soil is mapped on 28 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 47 percent of the area.
  • Highways inside the boundary: Texas State Highway 79 and Texas State Highway 25. State permit office: TxDOT Wichita Falls District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Archer City, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring on Center Street in Archer City?

Bluegrove fine sandy loam is the leading mapped surface soil in Archer City, and clay farther down can make a bore pull sticky. The Census Bureau Vintage 2024 estimate puts the Archer County seat at 1,642 people. We install water and sewer lines along Center Street, plus electric conduit and fiber beneath streets such as Oak Street when the route and utility marks support the plan.

Our main office is in Yukon, Oklahoma, and Archer City work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. The family business began in 1965, and directional boring has been part of our work since 1982. A Center Street service may call for a 3/4 inch line, while a larger route near Texas State Highway 79 can use casing up to 48 inch, depending on the design.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Bluegrove soil in Archer City?

The USDA soil survey maps Bluegrove fine sandy loam, 1 to 5 percent slopes, across 28 percent of Archer City. Fine sandy loam makes up 41 percent of the mapped surface texture, while clay loam accounts for 18 percent and clay for 12 percent. At about 40 inches below the surface, clay is the mapped texture across 47 percent of the area; the average clay content at that depth is 41 percent. These are mapped soil patterns, not test borings. The survey also maps Wichita clay loam and Jolly Rock outcrop complex, so conditions can change along a route.

USDA soil survey, inside the Archer City city limitsWhat is mapped
Soil series mappedBluegrove 28 percent, Wichita 17 percent, Kamay 10 percent, Vernon 10 percent and Jolly 8 percent
Texture at the surfacefine sandy loam 41 percent, clay loam 18 percent and clay 12 percent
Texture about 40 inches downclay 47 percent, bedrock 36 percent and sandy clay 7 percent
Engineering class about 40 inches downlean clay (CL) 47 percent and fat clay (CH) 11 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inches47 percent of the area (0 percent hard rock, 47 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel84 percent of the area

The USDA survey maps bedrock within 60 inches across 47 percent of Archer City, with a typical depth of 26 inches. The Archer City formation is Permian age and includes shale, sandstone, siltstone and conglomerate; weathered rock can slow a bore and affect steering where soil meets rock. No seasonal water table is mapped within 60 inches, while flood prone soils cover 5 percent of the area. High steel corrosion risk is mapped across 84 percent, a concern for uncoated steel casing and tracer wire; the line owner selects any coating.

How do we drill clay in Archer City?

Archer City soil changes from Bluegrove fine sandy loam at the surface to clay and mapped bedrock below. We adjust the drilling fluid, reaming plan and pipe timing to keep the bore controlled through those layers.

  1. In Bluegrove fine sandy loam, we match fluid and reaming to the route; clay farther down can cling to the reamer and grip the pipe.
  2. Where Archer City’s mapped clay is heavy, we watch fluid returns near pavement so pressure does not lift a street or slab.
  3. With bedrock mapped as shallow as a typical 26 inches, we allow more time for slower drilling and monitor the soil to rock transition.
  4. Before drilling near a marked line on Center Street, we hydrovac pothole to confirm its depth, then track the drill head and log depth and pitch.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

Where might a line go under Texas State Highway 79 in Archer City?

Texas State Highway 79 has 2.3 mapped roadway miles inside Archer City, and Texas State Highway 25 has 1.7. Both can call for a bore beneath pavement rather than an open cut. Center Street is the longest named street, with 1.93 miles in the city; Oak Street has 1.9 and South Street has 1.58. Main Street adds 1.55 mapped miles. Those street lengths help define possible routes, but the actual path depends on the address, existing utilities and access for the drill and entry pits.

CrossingTypeMapped extentWho has a say
Texas State Highway 79State highway2.3 roadway miles insideState highway office
Texas State Highway 25State highway1.7 roadway miles insideState highway office
South Fork Little Wichita RiverStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Archer City LakeLake or pond80 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Archer City or within one mile outside its limits, so the mapped city routes have no track crossing to plan around. No named stream runs inside the city; South Fork Little Wichita River lies 0.7 miles from the limits. The city has 3.66 miles of unnamed drainage and Archer City Lake covers 80 acres inside the limits. No street crossings of named streams are mapped in the city. A lake or waterway route still needs jurisdiction checked during planning.

Who approves a bore on Archer County roads and city streets in Archer City?

Center Street and Oak Street are city streets because Archer City is incorporated, so the city is the local authority for work on its streets. A bore within Texas State Highway 79 or Texas State Highway 25 right of way needs a TxDOT utility permit. The TxDOT Wichita Falls District reviews it, and the utility that owns the line files through TxDOT’s online RULIS system; we prepare the bore plan and profile for that filing. TxDOT requires highway crossings to be bored or tunneled, with casing and cover set by the utility rules and permit. No railroad is mapped in Archer City. If a route crosses Archer City Lake or another waterway, its jurisdiction is checked during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Archer City, including the City of Archer City?

The City of Archer City public water system uses surface water and reports 3,381 service connections for a population served of 1,601. For electric conduit, Archer County service is reported by AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power and Tri-County Electric Cooperative. Those providers do not establish which one serves every Center Street address. We confirm the line owner before planning a conduit bore, so the route and conduit specifications match the right system.

Line ownerWhat it isSourceSize
City of Archer CityPublic water systemSurface water3,381 connections, 1,601 people served
AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power and Tri-County Electric CooperativeElectric utilities reporting service in Archer CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put Archer City’s median housing year at 1964. The estimates show 47 percent of homes built before 1960 and 13 percent built in 2000 or later. On Oak Street, a replacement bore may need to work around older buried lines, while a newer service has a different route and connection point. We hydrovac pothole marked utilities before drilling near them; paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Where is Archer City in relation to Windthorst and Wichita Falls?

Archer City is the incorporated county seat of Archer County, with an elevation of 1,064 feet and a land area of 2.36 square miles. Its ZIP code is 76351. Scotland is 9.8 miles northeast, and Windthorst is 11.1 miles east; Holliday lies 15.7 miles north. Wichita Falls, the nearest larger city, is 22.5 miles north. From our Yukon, Oklahoma main office, the road distance is 168 miles and the drive is 3.4 hours. That distance is part of planning the equipment and crew mobilization for a Center Street or Texas State Highway 79 project.

Places near Archer City

What kinds of bores might Archer City need near South Fork Little Wichita River?

  • Highway crossing: A bore beneath Texas State Highway 79 can carry a water line or conduit while keeping the existing pavement intact.
  • Water service: A service near Center Street can connect to the City of Archer City system, with the route set around marked utilities.
  • Fiber route: Fiber conduit along Oak Street can be installed beneath the street surface, with potholes to verify marked line depths.
  • Drainage crossing: A route near Archer City’s 3.66 miles of unnamed drainage needs entry and exit pits placed clear of the channel.
  • Lake route: Work near Archer City Lake needs a planned path and a check of water crossing jurisdiction before drilling begins.
  • Airport service: A line near Archer City Municipal Airport can be routed by bore to avoid cutting pavement along its planned path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a directional boring quote for Center Street in Archer City?

For a Center Street quote, send the street address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help. The route matters in Archer City because a bore near Texas State Highway 79 may involve pavement and a different work area than a service along Oak Street. Include any known drainage or utility crossings.

The Bluegrove soil and clay mapped below it matter first because sticky ground can change fluid use, reaming stages and pipe timing. A route under Texas State Highway 79 adds highway permit, casing and cover details to the scope. We also account for line size and length, marked utilities that need potholing, pavement, drainage crossings, pits and excavator time. Archer City is 168 road miles from Yukon, so mobilization is part of the job cost. High profile or emergency work can also change the plan.

Questions people ask about boring in Archer City

Does Trinity Boring Solutions take jobs in Archer City and Archer County, and how are crews assigned?

Yes. We take directional boring work in Archer City and across Archer County. Our own crews handle projects, with support from partner contractor yards that we have vetted. You work with Trinity from the first call through the bore log, whether the work is near Center Street or Texas State Highway 79.

Who owns electric lines in Archer City and Archer County, and who confirms conduit specs?

AEP Texas North, Oncor Electric Delivery Company, Texas-New Mexico Power and Tri-County Electric Cooperative report electric service in Archer County. That does not identify the provider at every Oak Street address. The line owner should be confirmed before a conduit bore, and that owner confirms the specifications for its line.

Who controls South Street in Archer City, and can a bore avoid cutting it?

Archer City is incorporated, so South Street is a city street. Directional boring can carry a line beneath the street without opening a trench through its surface. The route still depends on utility locations, suitable entry and exit pits, and any approval needed for work on the city street.

How old are buried lines near Oak Street in Archer City, and can replacements be bored?

The American Community Survey 2019 to 2023 estimates give Archer City a median housing year of 1964, with 47 percent of homes built before 1960. Those figures do not date individual buried lines, but they make utility locating and potholing important on Oak Street. A replacement line can be bored if the route and access allow it.

Does Bluegrove soil in Archer City corrode steel, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk across 84 percent of Archer City, including areas with Bluegrove soil. HDPE pipe is not subject to that soil corrosion concern. If a design uses steel casing or tracer wire, the line owner chooses the coating based on the project.

What ground will a bore pass through in Archer City near Bluegrove soil?

The USDA survey maps Bluegrove fine sandy loam across 28 percent of Archer City. At about 40 inches, clay is mapped across 47 percent of the area, and bedrock within 60 inches is mapped across 47 percent. Those mapped layers can mean sticky drilling or slower progress where the bore meets weathered rock.

What bore sizes and lengths can Trinity handle on Main Street in Archer City?

For a Main Street project, our range runs from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The workable size and length depend on the line, ground, crossings and available space for pits. A map pin or plans help us assess the route.

How early should I call Texas811 for a Center Street bore in Archer City?

For a Center Street excavation, Texas811 requires a locate request at least 48 hours before work starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start moves more than 14 days past the original notice, submit a new request. Have worn or moved marks refreshed before work continues.

What affects the cost of a bore under Texas State Highway 79 in Archer City?

The cost depends on length, line size, the clay and weathered bedrock along the route, utilities to expose, and pavement or drainage crossings. Texas State Highway 79 also brings permit and casing details into the plan. Pit work and the 168 road miles from Yukon affect mobilization and equipment needs.

Where the Archer City facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Archer City

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Archer City, Texas

Type the address of your job in Archer City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Archer City

Same county: Megargel. All counties: Texas county list.